Fire Stopping in Clermiston
Need fire stopping in Clermiston? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Seals that don’t match their tested detail
- Service penetrations left open after M&E works
- Fire-stopping items raised at inspection or handover
Need fire stopping in Clermiston?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle fire stopping in Clermiston
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our job is fitting fire-rated and intumescent sealant at those service penetrations, and along linear gaps, where it is the specified product. Each seal follows the manufacturer’s tested detail. The enquiries we see most involve fire-rated sealant that has cracked or shrunk back and hidden openings found during inspections, across pipe penetrations, linear gaps at wall heads and joints between fire-resisting walls and floors. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Clermiston is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Scotland’s non-domestic Technical Handbook says a service penetration ought to match, as a minimum, how long the wall or floor resists fire. For a building in Clermiston, specified fire-rated sealant is installed as the maker’s tested detail describes.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Place
- Clermiston (EH4, EH12)
- Wider area
- Edinburgh
- Cover
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
What happens if it’s left?
Open penetrations multiply: each new service adds to the list. Keeping on top of it after each round of works keeps the job small. In a tenement or shared city building, water from a failed joint can reach other owners’ property. Fixing it promptly keeps repairs small.
Pricing service penetrations depends on quantities, condition and access. Call for a quote.
Why choose Mastic Doctor in Clermiston
- One number for every site we cover
- A Constructionline member, so easy to vet
- Failed material removed, not covered up
- Products installed to the manufacturer’s instructions
Read our cost guide and how we’re accredited.
Should maintenance staff do it?
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
On site: what to expect
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. With the paperwork done, we take the joints in the sequence agreed with you, and each area is checked before we leave it. In a Scottish city, kerbside space and loading need planning, especially near the centre. Tenement closes, shared stairs and factor approvals may also be involved.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Before we start on site
- Confirm the product named in the specification
- Send asbestos survey details if the building is pre-2000
- Flag any permit to work we will need
Request a quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, phone 01277 525 020 or email a schedule or drawings.
Related advice
Signs you need fire stopping in Clermiston
Some seals fail because the wrong product went in: builders’ foam or ordinary silicone used to fill a hole. The opening looks sealed but has no fire test evidence behind it.
Common reasons buildings call us in:
- Damaged fire seals in risers and voids
- Service penetrations left open after M&E works
- Open linear gaps along the top of fire-resisting walls
- Fire sealant pulled out of the opening
For a site team at a college like Edinburgh College - Sighthill Campus, which lies south of Clermiston, fire-rated sealing is best scheduled after the summer works.
What to look for in a quote
- The named product and why it was chosen
- How long is the guarantee, and what does it include?
- Health and safety accreditation such as CHAS
- How they handle RAMS and site documents
Fire-rated sealing for Clermiston buildings
There are four care or nursing homes within about 2 miles of Clermiston. In a care home, any new pipe or cable through a fire-resisting wall should be sealed to the specified detail. A 2-mile radius around Clermiston takes in a good number of hotels. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.
Campus buildings at universities such as Edinburgh Napier University - Sighthill Campus (to the south of Clermiston) see constant changes to data and services, and fire-rated sealant goes in around new penetrations where it is specified. For a unit at a site such as Corstorphine Retail Park, which lies south of Clermiston, any new service through a fire-resisting wall should be sealed to the tested detail.
Clermiston is about 3 miles west of Edinburgh, in Edinburgh. We send applicators to Clermiston for service penetrations. 174 places across Edinburgh fall within our area, including Clermiston.
Postcode districts covered here: EH4 and EH12 for service penetrations. Buildings on Oak Lane, Rannoch Road and Hillview Road are within our area for service penetrations. Sites close to Clermiston are covered too, including Drumbrae (1 mile south-west), Parkgrove (1 mile north-west), Corstorphine (1 mile south), Craigcrook (1 mile east) and Davidson's Mains (1 mile north-east). Nearby towns on our patch include Edinburgh (3 miles east), Leith (5 miles east), Bonnington (4 miles east), Greenside (4 miles east), Broughton (4 miles east) and Bellevue (4 miles east).
What’s near Clermiston
Locally, jobs take us to sites close to The Torfin pub. The closest station to Clermiston is South Gyle station, about 1.3 miles south. Well-known places in the area include Murrayfield Experience (2.1 miles south-east) and Corstorphine Hospital (1.1 miles south-east). Not far away are Corstorphine Hill and Dundas Loch.
What sealant work can’t fix
Being straight saves everyone time. New sealant won’t cure:
- Plastic pipes whose detail calls for a collar or wrap
- Writing the fire-stopping specification
- Signing off or certifying a building’s fire stopping
Not sure which it is? You can call the office on 01277 525 020 or use the quote form and we will tell you honestly.
Surfaces we seal
- Service gaps in risers
- Linear gaps at wall heads
- Cable penetrations
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Small duct penetrations where the tested detail allows
How the job changes by surface
Metal pipes
Heat travels along metal pipework. We follow whatever the detail requires and flag anything we can’t match.
Linear joints
Joints at the top of partitions may need to move as the slab above deflects. We use the product and backing the detail names for that movement.
Also near Clermiston
Other services in Clermiston
Your questions answered
What do Scotland’s building standards say about service penetrations in Clermiston?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Can you work in a care home near Clermiston with residents in?
Yes. We work around residents’ routines, a room or two at a time. We follow the home’s own procedures throughout.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it, flagging anything that needs clarifying.
Are your applicators CSCS-carded?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
How do we ask for a quote?
The quote form is the simplest route, though you can also ring 01277 525 020 or email us. Photos, drawings or a joint schedule help us quote quickly.
Does weather matter for sealant work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
Do you take on small jobs?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.