Fire stopping in Clachan Shannda
Fire stopping in Clachan Shannda, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Damaged fire seals in risers and voids
- Fire sealant pulled out of the opening
- Fire-stopping items raised at inspection or handover
Fire stopping near Clachan Shannda
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our fire stopping in Clachan Shannda
Most of our fire stopping work happens after the building is up. Each new cable, pipe or data route cut through a fire-resisting wall leaves an opening behind, often unnoticed. Those on your schedule are closed with the specified product. Site teams most often ask us about expanding foam used as fire stopping and head-of-wall gaps with no fire seal, on service gaps in risers, small duct penetrations where the tested detail allows and pipe penetrations. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Clachan Shannda is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
For a building near Clachan Shannda, we plan fire-rated sealing so it’s finished in one visit where possible. Photos of the gaps, the services and the wall or floor type help us bring the right products.
Work we carry out comes with a 12-month guarantee. If an installation problem shows up, call the office on 01277 525 020 or email drawings and photos and we will arrange a return visit.
- Location
- Clachan Shannda (HS6)
- Region
- Na h-Eileanan Siar
- Guarantee
- 12 months on every job
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
What affects the price in Clachan Shannda
There’s no standard rate for sealant work, because every site is different. What we take into account:
- The size and state of each joint
- Working within restricted access windows
- The site’s rules and procedures
- Travel to remote or island sites
Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote.
Sending details for a quote
It doesn’t need to be a full survey. A few details are enough to get going:
- Whether an asbestos survey exists
- The product your specification calls for
- Whether the building will be occupied during the work
- Rough lengths or quantities, or drawings if you have them
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, ring 01277 525 020 or email a schedule or drawings.
Why it’s worth doing now in Clachan Shannda
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. While the openings can be reached, sealing them is normally straightforward. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. Renewing every failing joint on one visit is the sensible approach for a place like Clachan Shannda. Send photographs and we’ll quote for everything together.
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Why clients in Clachan Shannda choose us
- One contact handling all your sites
- Fully insured, including public liability cover
- Health and safety: CHAS accredited
- Clear, fixed quotes
Read our cost guide or our accreditations.
Fire stopping around Clachan Shannda: points for this area
Being on an island, Clachan Shannda means planning around ferry times as well as the weather. The specification and photographs of each penetration let us bring the right products first time. Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, using products tested for the way they’re used. We install fire-rated sealant to that tested detail where it is specified.
For any site around Clachan Shannda, we work to the specification and the manufacturer’s installation guidance, leaving design and sign-off with the designer. Buildings near Clachan Shannda get the fire-rated product that’s specified, installed to its tested detail.
Clachan Shannda (Gaelic: Clachan Sands) is in Na h-Eileanan Siar. We cover commercial sites throughout Clachan Shannda. Our Na h-Eileanan Siar coverage takes in 87 places.
We cover the HS6 postcode districts for service penetrations. Being close to the B893, Clachan Shannda is easy to get to with materials and equipment. If your building is just outside Clachan Shannda, we cover Ruisgarry (4 miles north-east), Lochmaddy (5 miles south-east), Locheport (8 miles south), Claddach Kyles (9 miles south-west) and Claddach Kirkibost (9 miles south-west). Where a site is remote or on an island, we plan travel and materials carefully, so the full address helps from the start.
What’s near Clachan Shannda
Not far away are Loch nan Gobhar and Borve Hill.
Diagnose, treat, sign off
Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. Where we can, we combine work around Clachan Shannda with other jobs nearby. Tell us how flexible your dates are.
- We read the specification, drawings or penetration schedule you send.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Tell us your opening times and when work is allowed
- Point out any areas we must not close
- Flag any permit to work we will need
Quotes
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or speak to us on 01277 525 020 or send photos by email to discuss it first.
Related advice
For managing agents and facilities managers
We work for building owners and managing agents on everything from one building to a spread of sites around Clachan Shannda. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Common questions from Clachan Shannda clients
Can you take on a job in Clachan Shannda, on the island?
Yes. Islands are part of our area, Clachan Shannda included. We plan island jobs around the ferry and the forecast, and bring everything the job needs on the first crossing.
Do you decide the fire-stopping details for buildings in Clachan Shannda?
No, that sits with the designer, fire engineer or building control. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
Do you take on multi-site work?
Yes. Multi-site work and planned programmes are a core part of the service, planned site by site to suit how each building is used.
When can the area be used after sealing?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
Can the sealant be colour-matched?
That depends on the product. Some ranges are wide, others limited, so we will confirm the colours available for the specified product with the quote.
Can you work while the building is occupied?
In the majority of cases, yes. We phase the work so most of the building stays in use.
Is any job too small?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
When to bring in a specialist
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Also near Clachan Shannda
What else we do in Clachan Shannda
What we can’t put right
We check first that sealant really is the fix. It isn’t the answer for:
- Walls or floors that aren’t fire-resisting to begin with
- Fire risk assessments, a job for a competent assessor
- Signing off or certifying a building’s fire stopping
If in doubt, call the office on 01277 525 020 or use the quote form and we will say what we think.
What we seal
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Pipe penetrations
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Cable penetrations