Ardheisker fire stopping
Commercial sealant work in Ardheisker for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Unsealed joints where partitions meet the slab
- Old intumescent sealant that has split away
- Unsealed penetrations discovered above suspended ceilings
Need fire stopping in Ardheisker?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Aftercare for building managers
Once the work is signed off, a little attention goes a long way:
- Foam or ordinary sealant is never a fire-seal repair
- File the specified details where the next contractor can find them
- Treat an open penetration as a priority repair
- Look above ceilings when tiles are lifted for other jobs
Allow the manufacturer’s stated cure time before boxing in or decorating. Some fire-rated sealants accept paint and some don’t.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. Then the seal goes in while the area is open instead of being left for someone else.
Fire stopping in Ardheisker
A fire-rated sealant is only one part of a tested system: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in, and we say so if it doesn’t fit. If you’re dealing with seals disturbed by maintenance and left open and unsealed penetrations discovered above suspended ceilings, we can put it right, on cable penetrations, pipe penetrations and service gaps in risers alike. For commercial sealant work in Ardheisker, you deal with one contact from quote to sign-off, whether it’s one building or several.
For a building near Ardheisker, we plan fire-rated sealing so it’s finished in one visit where possible. Send the specification and photos of the openings, with sizes if you have them.
Building owners and contractors get the same cover: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Location
- Ardheisker (HS6)
- Region
- Na h-Eileanan Siar
- Cover
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Places near Ardheisker
Other services in Ardheisker
Questions we’re asked in Ardheisker
Do you decide the fire-stopping details for buildings in Ardheisker?
No. The designer or fire engineer sets the detail and building control accepts it. Our part is installing the specified product to its tested detail, and telling you if the detail calls for something other than sealant.
Will you travel to Ardheisker on the island?
Yes, Ardheisker is within the area we cover. We work across every Scottish council area. We plan island jobs around the ferry and the forecast, and bring everything the job needs on the first crossing.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
Which sealant will you use?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Can you work while the building is occupied?
Yes, with some planning. We agree a sequence with your contact so just one area at a time is disrupted.
Do you need to see the site first?
It depends on the job. Simple work can often be priced from photos, and bigger or more complex jobs normally get a visit.
Do you take on multi-site work?
Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.
On site: what to expect
Where the site stays busy, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed, then reopened once the sealant allows before the next one starts. Jobs near Ardheisker are often grouped with others in the same area, to make the most of each trip. Let us know if your dates have any give.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Move anything stored against the joints
- Explain the parking and delivery arrangements
- Share your working hours and any access restrictions
Request a quote
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or call the office on 01277 525 020 or email us if you’d rather talk the job through.
Read more
Where services cross fire walls in Ardheisker
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, and products should be tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail. Being on an island, Ardheisker means planning around ferry times as well as the weather. The specification and photos of each penetration let us bring the right products first time.
Around Ardheisker, fire-stopping design belongs to the designer and building control; installation to the specification is our part.
Ardheisker is in Na h-Eileanan Siar. Ardheisker sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. 87 places across Na h-Eileanan Siar fall within our area, Ardheisker among them.
Anyone looking for fire stopping in HS6 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Nearby places we also cover include Claddach Kyles (1 mile east), Claddach Kirkibost (1 mile south-east), Locheport (5 miles south-east), Baile a' Mhanaich (7 miles south) and Balivanich (8 miles south) for service penetrations. Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you call 01277 525 020 or use the quote form.
What’s near Ardheisker
Green spaces nearby include Loch Grogary and Balranald RSPB reserve.
How the job changes by surface
Masonry and concrete
Block walls and concrete floors are common substrates for penetration seals. Dust and debris are cleared from the opening, so the sealant and any backing sit properly.
Cables and cable bundles
Cable penetrations are frequently sealed with fire-rated sealant where the detail allows. Bundle size, cable type and the space between cables all matter and we work within those limits.
What affects the price in Ardheisker
Quotes vary with the job. It mainly depends on:
- Which sealant the job calls for
- Joint width, depth and condition
- Whether old sealant has to be cut out first
- Distance, for remote addresses
The product called for affects the cost, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Before you send an enquiry
Diagnosis starts before we arrive. Let us know:
- Anything awkward about access or site hours
- Your programme or deadline
- The site address and postcode
- The asbestos register, for older buildings
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Do you need fire stopping in Ardheisker?
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is when untested combinations creep in.
Look out for the following:
- Fire seals cut back for extra cables and never reinstated
- Unsealed openings around new pipes and cables
- Fire stopping installed outside its tested range
- Fire-rated sealant that has cracked or shrunk back
Around Ardheisker, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product.
Questions to ask before you book
- Their public liability cover
- Their pre-qualification and accreditations
- Their plan for phasing and protecting the area
- Is the sealant right for the movement and the substrate?
Owners, agents and contractors
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.