Fire Stopping in Carrbridge
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Carrbridge and the surrounding area. Send photographs or drawings for a fixed quote.
- Unsealed openings around new pipes and cables
- Hidden openings found during inspections
- Improvised or mixed-product fire seals
Need fire stopping in Carrbridge?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle fire stopping in Carrbridge
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our job is fitting fire-rated and intumescent sealant at those service penetrations, and along linear gaps, where it is the specified product. Each seal follows the manufacturer’s tested detail. The enquiries we see most involve damaged fire seals in risers and voids and fire-stopping items raised at inspection or handover, across joints between fire-resisting walls and floors, cable penetrations and small duct penetrations where the tested detail allows. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Carrbridge it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
For a building near Carrbridge, we plan fire-rated sealing so it’s finished in one visit where possible. Send the specification and photos of the openings, with sizes if you have them.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Carrbridge (PH23)
- Region
- Highland
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Diagnose, treat, sign off
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed, then handed back before the next one starts. Where we can, we combine work around Carrbridge with other jobs nearby, to make the most of each trip. Tell us how flexible your dates are.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Before we start on site
- Make sure the joints can be reached
- Let building users know which areas are affected
- Point out any areas we must not close
Get a fixed quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.
Advice
Places near Carrbridge
What else we do in Carrbridge
Compartments and services around Carrbridge
There are several hotels within about 2 miles of Carrbridge. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail. Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. Our part is installing the specified fire-rated sealant to its tested detail.
For buildings in and around Carrbridge, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.
Carrbridge (Gaelic: Drochaid Chàrr) is about 20 miles south-east of Inverness, in Highland. If you are looking for fire stopping in Carrbridge, we can help. Our Highland coverage takes in 256 places, large and small. Aberdeen is covered too, some 64 miles away.
If you need fire stopping in PH23, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Buildings on Station Road, Rowan Park and Carr Road are within our area for service penetrations. We also cover Duthil (2 miles north-east), Boat of Garten (3 miles south-east), Skye of Curr (5 miles east), Dulnain Bridge (5 miles east) and Aviemore (6 miles south) for service penetrations. Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
Around Carrbridge
The nearest railway station is Carrbridge station, about 0.7 miles west of the centre. A little further out are Muckrach Castle (4.9 miles east). The countryside around Carrbridge includes Loch Vaa.
Surface by surface
Metal pipes
Heat travels along metal pipework, and some details add wrapping or a set length of insulation. We follow whatever the detail requires and flag anything we can’t match.
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and debris are cleared from the opening, so the sealant and any backing sit properly.
How the quote is worked out
A fixed quote reflects the actual work. It takes account of:
- Any access equipment needed
- The product specified
- Induction, permit and paperwork requirements
- Whether the work must be split into stages
The price depends on the quantity of joints, what has to come out first and the access. Call for a fixed quote once you have the details.
What to include in your enquiry
A few photos plus some basic facts will normally do. It helps to include:
- The site address and postcode
- Photos of the joints, close up and from further back
- When you need the work done
- Whether an asbestos survey exists
For a fixed quote, give us a call on 01277 525 020 or use the quote form, telling us the site location and the nature of the job. You can also send details through our quote form.
After the work
To get the most from the new sealant:
- Treat an open penetration as a priority repair
- Keep product data and details in the fire safety file
- Have penetrations checked while they can still be seen
- Settle who seals which penetrations at the start of a project
Never top up a fire seal with foam, ordinary silicone or filler. Repairs need the same product and detail as the original, or a new specification from the designer.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
Leave it or put it right?
An improvised seal can look finished while offering no tested performance. The fix is to remove it and reinstall to the detail, and doing it once, properly, is cheaper. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Carrbridge, a repair visit takes planning, so it’s better to act early.
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Why appoint us
- Fixed quotes based on photos, drawings or a visit
- Health and safety: CHAS accredited
- Constructionline member
- Joints cleaned back to sound surfaces
Take a look at what affects the cost or our accreditations.
Signs you need fire stopping in Carrbridge
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is how unsuitable products and improvised details end up in compartment walls, which then have to be put right.
Things that usually lead to an enquiry:
- Fire seals cut back for extra cables and never reinstated
- Builders’ foam or ordinary silicone in compartment walls
- Penetration schedules that need working through
- Head-of-wall gaps with no fire seal
In a hotel such as Cairn Hotel, less than half a mile to the north-west of Carrbridge, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.
What your quote should include
- How they’ll work around occupants
- How the joint faces will be prepared and primed
- Proof of insurance
- Whether their applicators hold CSCS cards
Questions about Carrbridge
How do Scotland’s building standards affect fire-rated sealant in Carrbridge?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Is a smaller place like Carrbridge outside your area?
No. Places such as Carrbridge are covered as much as the big towns. We cover the whole of Scotland. Where we can, we group nearby jobs to make the most of each trip.
How long before the joints can be used?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
What about RAMS and site documents?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
Who decides which product is used?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Do you work to architects’ specifications?
Yes. Include it with the drawings when you ask for a quote, and we will price the work to it.
Do you take on small jobs?
We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.