Dulnain Bridge fire stopping
Need fire stopping in Dulnain Bridge? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Unsealed openings around new pipes and cables
- Hidden openings found during inspections
- Expanding foam used as fire stopping
Fire stopping in Dulnain Bridge
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Cost factors for service penetrations
What shapes the price:
- Whether old sealant has to be cut out first
- The size and state of each joint
- Phasing around occupants
- Induction, permit and paperwork requirements
The product called for affects the cost, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Details that help us quote
There’s no need for a formal survey. These details are enough to start:
- Whether the building will be occupied during the work
- The postcode of the building
- Asbestos survey details if the building is older
- Your programme or deadline
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or phone 01277 525 020 or send details through our quote form to discuss it first.
Fire stopping in Dulnain Bridge, done properly
A fire-rated sealant is only one part of a tested system: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. We match each opening to that detail before any sealant goes in, and raise it with you if it falls outside. The enquiries we see most involve improvised or mixed-product fire seals and open linear gaps along the top of fire-resisting walls, on joints between fire-resisting walls and floors, small duct penetrations where the tested detail allows and linear gaps at wall heads. A specialist sealant contractor works differently from a general builder: on jobs in Dulnain Bridge, preparation and product choice get the time they need.
Around smaller places such as Dulnain Bridge, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Those penetrations are closed with the product the specification names, built up as tested.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Place
- Dulnain Bridge (PH26)
- Region
- Highland
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Also near Dulnain Bridge
What else we do in Dulnain Bridge
Where services cross fire walls in Dulnain Bridge
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. We install fire-rated sealant to that tested detail where it is specified.
For a unit at a site such as Achnagonalin Industrial Estate (2.5 miles north-east of Dulnain Bridge), new power or data runs between office and warehouse can breach a compartment wall.
Dulnain Bridge is about 21 miles south of Nairn, in Highland. Anywhere in PH26, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Our Highland coverage takes in 256 places, large and small. For work in that direction, see our Aberdeen page (59 miles or so).
If you need fire stopping in PH26, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Among the streets we cover are School Gardens, School Road and School Place. Sites close to Dulnain Bridge are covered too, including Skye of Curr (1 mile south-west), Nethy Bridge (3 miles south), Grantown-on-Spey (3 miles north-east), Duthil (4 miles west) and Boat of Garten (5 miles south-west). Where a site is remote or on an island, we plan travel and materials carefully, so the full address helps from the start.
Around Dulnain Bridge
Nearby you’ll also find Grantown Museum (3.1 miles north-east) and Muckrach Castle (0.6 miles west). Green spaces nearby include Loch Garten.
Signs you need fire stopping in Dulnain Bridge
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Deflection and building movement can open these gaps. The tested detail for a linear joint states the width and movement it covers.
Typical triggers for a call:
- Damaged fire seals in risers and voids
- Openings found when ceilings come down for a refit
- Openings left by services added after handover
- Fire sealant pulled out of the opening
Large healthcare estates like Ian Charles Community Hospital, 3.4 miles north-east of Dulnain Bridge, change their services often, so penetration seals are worth checking after M&E work.
What to look for in a quote
- Proof of insurance
- Is the sealant right for the movement and the substrate?
- What site paperwork they can supply
- How they’ll work around occupants
Different surfaces, different methods
Small ducts
Some fire-rated sealant details cover small ducts. Larger or fire-rated ductwork usually needs a different solution set by the designer, and we’ll say if that applies.
Masonry and concrete
Block walls and concrete floors are common substrates for penetration seals. Dust and loose debris are cleared out of the opening, with backing added if the detail requires it.
Dulnain Bridge: questions and answers
How do Scotland’s building standards affect fire-rated sealant in Dulnain Bridge?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Can you work on a hospital site such as Ian Charles Community Hospital?
Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.
How do we ask for a quote?
You can use the quote form on this site; alternatively, call the office on 01277 525 020 or email the details over. Include photographs or drawings if you have them.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
Can you work while the building is occupied?
Normally, yes. We phase the work so most of the building stays in use, with each area protected and signed.
Can the sealant be colour-matched?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We’ll confirm the colours available for the specified product.
Does weather matter for sealant work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Our process
Site rules come first: sign-in, induction and whatever permit system the building uses. With the paperwork done, the joints are worked through in the order agreed with your site contact. Jobs near Dulnain Bridge are often grouped with others in the same area, to make the most of each trip. Let us know if your dates have any give.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned first.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Before we start on site
- Move anything stored against the joints
- Flag any permit to work we’ll need
- Let building users know which areas are affected
Get a fixed quote
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
Read more
What we can’t put right
A proper diagnosis includes knowing what sealant can’t do. You’ll hear from us if the cause turns out to be one of these:
- Approving the work on behalf of building control
- Fire doors, dampers or other fire safety equipment
- Large openings beyond what any sealant detail covers
If you are not sure, just phone 01277 525 020 or send photos by email and we’ll give you a straight answer.
What we seal
- Joints between fire-resisting walls and floors
- Cable penetrations
- Service gaps in risers
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Pipe penetrations
Leave it or put it right?
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. Sealing them to the specified detail deals with the fire risk first and the building feels the difference. For buildings near Dulnain Bridge, dealing with all the failing joints at once saves return trips. Send photographs and we’ll quote for everything together.
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
Why choose Mastic Doctor in Dulnain Bridge
- Specification-led, product-correct work
- 12-month guarantee on workmanship
- Fully insured
- CHAS accredited