Fire stopping in Camden Town
Sealant work in Camden Town for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Service penetrations left open after M&E works
- Openings found when ceilings come down for a refit
- Improvised or mixed-product fire seals
Need fire stopping in Camden Town?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in Camden Town
Opened ceilings and riser doors often reveal service openings nobody sealed. If a specification already covers those walls and floors, we can reseal to it. With no specification in place, the first step sits with your designer or fire engineer, not with us. If you’re dealing with unsealed joints where partitions meet the slab and unsealed openings around new pipes and cables, we can put it right, on joints between fire-resisting walls and floors, pipe penetrations and service gaps in risers alike. Whoever orders the work in Camden Town, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Taller residential buildings in London may fall under the Building Safety Act’s higher-risk regime, where fire-stopping records get close attention. We install what the designer or fire engineer has specified, and if you need records of the work, tell us and we’ll confirm with the quote.
The 12-month guarantee covers our workmanship: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Camden Town (NW1, N1C, NW5, NW3)
- Wider area
- Greater London
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Your questions answered
Will you plan work around the academic year at somewhere like University of the Arts London?
Yes. Education sites typically want the work in vacations or in phases during term, and we plan to suit. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Can you seal around new services in a hotel near Camden Town?
Yes, where the specification calls for fire-rated sealant. Each seal follows the tested detail, and rooms are done in turn.
When can you be on site?
Give us your site hours and any access windows in your enquiry, and we’ll plan around them. You can reach the office between 8am and 5pm, Monday to Friday.
Can you quote from photos?
That depends on the size and complexity of the job. Simple work can often be priced from photos, while larger or less clear jobs get a site visit first.
Do your applicators hold CSCS cards?
Yes. Our applicators hold CSCS cards, as many construction sites ask for.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.
What will the job cost?
There isn’t a price list, as every site differs. With photographs or drawings, we can give you a fixed quote.
Nearby places to Camden Town
Other services in Camden Town
On site: what to expect
On arrival, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, with the work itself usually taking longer where risers, ceiling voids or occupied floors have to be worked through in sequence. Planning a London job such as one in Camden Town starts with access. Give us the hours we can be on site and we will schedule to suit.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Preparing the site
- Have the specification and drawings to hand
- Flag any permit to work we will need
- Tell staff and tenants when we’ll be in
Get a fixed quote
For a fixed quote, phone 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. Our quote form is another easy route.
Read more
When something else is needed
Honesty saves time and money. New sealant won’t cure:
- Fire risk assessments, a job for a competent assessor
- Construction that lacks the fire resistance the seal relies on
- Plastic pipes whose detail calls for a collar or wrap
If in doubt, call the office on 01277 525 020 or email drawings and photos and we’ll say what we think before you book.
Joints and surfaces we work on
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Cable penetrations
- Pipe penetrations
- Service gaps in risers
- Joints between fire-resisting walls and floors
Keeping the joints sound
For the best life from the joints:
- Keep general-purpose fillers away from compartment walls
- Treat an open penetration as a priority repair
- Keep product data and details in the fire safety file
- Leave fire sealant to cure fully before covering it
New services after handover are a common way fire stopping gets breached. A short check at the end of each job saves a long hunt later.
Specify fire stopping early on refits, not as an afterthought. The designer can then choose details that suit the services planned.
For managing agents and facilities managers
When you manage a building on behalf of an owner, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Service penetrations in Camden Town buildings
There are two care or nursing homes within about 2 miles of Camden Town. Care homes rely on fire-resisting walls and floors, and maintenance work that breaks through them leaves openings to seal. London’s office and residential buildings are refitted constantly, and each round of cabling or pipework can leave open penetrations. Penetrations are sealed with the specified product, to its tested detail, under the building’s own permit rules.
For a site team at a college like WM College, under half a mile south-east of Camden Town, fire-rated sealing is best scheduled after the summer works. At a healthcare site like St. Pancras Hospital, 0.5 miles south-east of Camden Town, new services through compartment walls are a constant, and each needs the specified seal. For an estates team at a campus like University of the Arts London (0.7 miles east of Camden Town), summer M&E works are usually followed by a round of penetration sealing.
Camden Town is about 2 miles north of City of Westminster, in Greater London. Businesses, contractors and managing agents in Camden Town can call on us for service penetrations, as part of our coverage of Greater London. Across Greater London, 764 places are covered, including Camden Town.
We take on service penetrations across the NW1, N1C, NW5 and NW3 postcode area. We cover commercial and managed buildings on Camden High Street, Greenland Road and Camden Road. You’ll find Camden Town on or near the A400 and B512. Just outside Camden Town, we also work in Agar Town (1 mile east), Kentish Town (1 mile north-west), Chalk Farm (1 mile north-west), Somers Town (1 mile south-east) and Primrose Hill (1 mile west). Further afield, our area takes in London (3 miles south-east), Kensington (4 miles south-west), Shoreditch (3 miles east), Walthamstow (6 miles north-east), Whitechapel (3 miles south-east) and Ruislip (12 miles west).
Local landmarks in Camden Town
Recent enquiries here include premises near The Camden School for Girls, North Bridge House School and The Camden Eye pub, among other places. Nearby too are Lewis Cubitt Park (0.7 miles east) and Vaughan Williams Memorial Library (under half a mile west). Camden Town has its own railway station: Camden Road station. Well-known places in the area include St Pancras Hospital (0.5 miles south-east) and Montfichet's Tower (2.5 miles south-east). Not far away are St. James's Park Lake and Adelaide Nature Reserve.
Different surfaces, different methods
Small ducts
Some fire-rated sealant details cover small ducts. Bigger ducts and fire-resisting ductwork are normally handled with other products, and we will say if that applies.
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and loose debris are cleared out of the opening.
Site staff or a sealant specialist?
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.