Fire Stopping in Camb
Planning work on a service penetration in Camb? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Open linear gaps along the top of fire-resisting walls
- Service penetrations left open after M&E works
- Hidden openings found during inspections
Fire stopping near Camb
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
From enquiry to sign-off
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Travel to smaller Scottish places like Camb is planned so the job is finished in one visit where possible, so photos, sizes and a full list matter. External joints need a dry spell as well.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
What we need from you
- Share your working hours and any access restrictions
- Let us know about inductions and permits
- Tell staff and tenants when we’ll be in
Ask for a quote
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
Read more
About our fire stopping in Camb
Facilities managers in Camb often find open service penetrations when ceilings come down for other work. If a specification already covers those walls and floors, we can reseal to it, matching the product and detail it names. Where there isn’t one, the designer or fire engineer needs to set one first. We work on pipe penetrations, linear gaps at wall heads and joints between fire-resisting walls and floors, and the failures we’re asked to look at most are damaged fire seals in risers and voids and openings left by services added after handover. A specialist sealant contractor works differently from a general builder: on jobs in Camb, preparation and product choice get the time they need.
Around smaller places such as Camb, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Those penetrations are closed with the product the specification names, built up as tested.
We sign every job off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Where
- Camb (ZE2)
- Region
- Shetland Islands
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Honest limits
We check first that sealant really is the fix. It isn’t the answer for:
- Construction that lacks the fire resistance the seal relies on
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Approving the work on behalf of building control
If in doubt, ring 01277 525 020 or email the details over and we will say what we think.
Surfaces we seal
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Cable penetrations
- Service gaps in risers
- Pipe penetrations
General trades versus a specialist
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
For managing agents and facilities managers
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, and each stage is agreed with your contact.
Building owners and managing agents use us on everything from one building to a spread of sites around Camb. Several sites can go on one quote, so there’s one set of paperwork to deal with.
What else we do in Camb
Do you need fire stopping in Camb?
Mixing products or improvising a detail breaks the link with the test evidence. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are the usual culprits.
Typical triggers for a call:
- Damaged fire seals in risers and voids
- Unsealed penetrations discovered above suspended ceilings
- Fire-stopping items raised at inspection or handover
- Non-fire-rated filler around services
Older community buildings such as Reafirth Chapel that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
What your quote should include
- How the existing material will be dealt with
- Their approach to joint depth and backing
- Whether their applicators hold CSCS cards
- How the joint faces will be prepared and primed
What sets the cost
A fixed quote reflects the actual work. It takes account of:
- Access and working height
- Which sealant the job calls for
- The size and state of each joint
- Phasing around occupants
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
What we need to price the job
There’s no need for a formal survey. These details are enough to start:
- A wide shot and a close-up of the area
- Any specification or named product
- How the joints are reached, and at what height
- What the building is and how it’s used
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, speak to us on 01277 525 020 or email the details over.
Fire-rated sealing for Camb buildings
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail. Work on Camb has to fit the ferry timetable and the forecast. Photos of each opening and the specification mean the right products make the trip.
Schools such as Mid Yell Junior High School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Camb is in the Shetland Islands. Looking for fire stopping in Camb? We can help. Camb is one of 63 places in the Shetland Islands on our list for service penetrations.
We take on service penetrations across the ZE2 postcode area. Sites close to Camb are covered too, including Mid Yell (1 mile south), Aywick (4 miles south), Houbie (7 miles east), Cullivoe (7 miles north) and Clivocast (7 miles north-east). For island and remote sites, travel and materials need planning ahead.
Landmarks near Camb
Green spaces nearby include Sigla Water and White Hill of Vatsetter.
Camb: questions and answers
Do you work on the island where Camb is?
Yes, Camb is within the area we cover. We work across every Scottish council area. We plan island jobs around the ferry and the forecast, and bring everything the job needs on the first crossing.
Can you produce the fire-stopping design for a job in Camb?
No, that sits with the designer, fire engineer or building control. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
Will you come and look before quoting?
It depends on the job. Simple work can often be priced from photos, and bigger or more complex jobs typically get a visit.
Can you handle several sites?
Yes. Multi-site work and planned programmes are a core part of the service, planned site by site to suit how each building is used.
Does weather matter for sealant work?
Outside, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to.
Can the sealant be colour-matched?
That depends on the product specified. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.