Fire stopping in Bouldnor
Looking for fire stopping in Bouldnor? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Expanding foam used as fire stopping
- Old intumescent sealant that has split away
- Head-of-wall gaps with no fire seal
Need fire stopping in Bouldnor?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in Bouldnor
Most of our fire stopping work happens after the building is up. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls. Those on your schedule are closed with the specified product. We work on service gaps in risers, small duct penetrations where the tested detail allows and joints between fire-resisting walls and floors, and the usual reasons a site gets in touch are builders’ foam or ordinary silicone in compartment walls and penetration schedules that need working through. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Bouldnor it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Barn and farm-building conversions near places like Bouldnor often combine new partitions with old walls. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Bouldnor (PO41)
- Region
- Isle of Wight
- Guarantee
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
When to call us in Bouldnor
Plenty of openings were simply never closed because they sat out of sight above a ceiling or inside a riser. Inspections, refurbishments and ceiling access normally bring them to light.
Any of the following is a good reason to get the joints checked over:
- Penetration schedules that need working through
- Openings found when ceilings come down for a refit
- Seals that don’t match their tested detail
- Non-fire-rated filler around services
Holiday works at schools like Yarmouth Church of England Aided Primary School often leave service openings to seal before pupils return.
What to look for in a quote
- The named product and why it was chosen
- Whether old or failed sealant will be cut out, not overlaid
- Who will actually carry out the work
- Proof of insurance
How the job changes by surface
Metal pipes
Heat travels along metal pipework. If the detail needs something beyond sealant, we tell you.
Risers and ceiling voids
Openings above suspended ceilings are easy to miss. We work through the areas on your schedule methodically.
Questions about Bouldnor
Is Bouldnor too far out for you?
No. Small places get the same service as large ones. We work across Greater London and the South East. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Can you seal around new services in a hotel near Bouldnor?
Yes, to the specification and the product’s tested detail. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we’ll tell you if the detail calls for a collar, wrap or batt instead.
How long before the joints can be used?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Can staff carry on working while you are here?
In the majority of cases, yes. We phase the work so most of the building stays in use.
Who decides which product is used?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
How long does a job like this take?
It depends on the scope, though a typical visit usually takes a single visit for a short list of penetrations, or a phased programme for a whole building. For bigger or phased jobs, we will set out a timescale with the quote.
Doing it in-house
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Aftercare for building managers
Regular inspection catches problems early. Specifically:
- Get seals inspected before ceilings and boxing close
- Record which product was used where
- Put resealing into every M&E and fit-out package
- Ask the designer to confirm details early on refits
Store the specified product details somewhere the next contractor can find them. Anyone resealing later needs to know which product and detail were used.
Keep a register of where seals are and what they are made of. When a new service goes through, everyone knows which product and detail to match, which saves guesswork.
Why act early in Bouldnor
The longer openings stay, the more there tend to be: each new service adds to the list. A schedule that is dealt with regularly stays manageable and avoids a much larger catch-up later. Older rural buildings around Bouldnor move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
What you get with us
- Failed material removed, not covered up
- Our applicators hold CSCS cards
- Fixed quotes based on photographs, drawings or a visit
- Over 20 years of commercial sealing
Read our cost guide and how we’re accredited.
Also in Bouldnor
Where services cross fire walls in Bouldnor
For England, the fire stopping of penetrations is dealt with in Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Either way, we install the specified product to its tested detail. Bouldnor has a number of hotels close by, all within 2 miles. In hotels, bedroom and corridor walls are normally fire-resisting, so services added in a refit need sealing with the specified product.
Older community buildings such as Church of St Swithin (old) that have been rewired or given new heating can have service gaps through walls worth checking against the specification. Hotels such as Bugle Hotel (0.9 miles west of Bouldnor) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified.
Bouldnor is about 5 miles south-east of Lymington, in the Isle of Wight. If you are looking for fire stopping in Bouldnor, we can help, as we do across the Isle of Wight. Our the Isle of Wight coverage takes in 125 places, large and small. Southampton is covered too, some 15 miles away.
Postcode districts covered here: PO41 for service penetrations. For a building on The Vineyard, Port La Salle and Waters Edge or nearby, we can quote for service penetrations. We also cover Yarmouth (1 mile west), Cranmore (1 mile east), Hamstead (2 miles north-east), Shalfleet (3 miles east) and Thorns Beach (4 miles north). Bigger towns within reach include Newport (8 miles east), Ryde (14 miles east), Cowes (8 miles north-east), Sandown (14 miles east), Shanklin (14 miles east) and Ventnor (14 miles south-east). For island and remote sites, travel and materials need planning ahead, so include the location in your enquiry.
Local landmarks in Bouldnor
Recent enquiries here include premises near Bugle Hotel. Bouldnor’s nearest station is Lymington Pier station, roughly 4.2 miles north-west of the centre. Nearby you’ll also find Ferguson Family Museum (1.9 miles south-west) and Yarmouth Castle (1 mile west). Green spaces nearby include Compton Down and Lymington and Keyhaven Marshes Nature Reserve.
From enquiry to sign-off
Inspect, seal, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Jobs in and around smaller places like Bouldnor are typically planned as a single visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Point out parking and an unloading spot
- Agree which areas must stay open
- Clear stock, furniture or equipment away from the joints
Request a quote
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. If you have questions first, speak to us on 01277 525 020 or email the details over.