Fire-rated sealing and fire stopping in Bishopstone, Kent
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Bishopstone. Send details for a fixed quote.
- Penetration schedules that need working through
- Seals that don’t match their tested detail
- Damaged fire seals in risers and voids
Fire stopping near Bishopstone
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Bishopstone
On a fit-out or refurbishment, we follow the services contractors floor by floor. We work from your penetration schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we’ll confirm with the quote. We work on pipe penetrations, joints between fire-resisting walls and floors and cable penetrations, and the failures we’re asked to look at most are unsealed joints where partitions meet the slab and service penetrations left open after M&E works. Whoever orders the work in Bishopstone, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
Around Bishopstone, penetration and linear seals tend to be one-building jobs. With the specification and photographs of the gaps, we can give a fixed quote and bring the right products.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Place
- Bishopstone (CT6)
- Wider area
- Kent
- Guarantee
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Questions we are asked in Bishopstone
Can you work at a site such as Eddington Business Park, by Bishopstone?
Yes, sites like Eddington Business Park are within our area, along with the rest of Bishopstone. Send details of the unit and the work through our quote form for a quick quote.
How does the move away from BS 476 affect penetration seals in Bishopstone?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Do you work in Bishopstone?
Yes. We cover Bishopstone and the rest of Kent. For a quote, call the office on 01277 525 020 or send details through our quote form.
Do you take on small jobs?
We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.
Are you insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Is your workmanship covered by a guarantee?
Yes, for 12 months. If our installation fails in that time, we return and fix it.
Do you work to architects’ specifications?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
Should maintenance staff do it?
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Redoing a failed joint usually costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Do you need fire stopping in Bishopstone?
Mixing products or improvising a detail breaks the link with the test evidence. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are the usual culprits.
Look out for the following:
- Penetration schedules that need working through
- Unsealed joints where partitions meet the slab
- Seals that don’t match their tested detail
- Non-fire-rated filler around services
Holiday works at schools like Reculver Church of England Primary School often leave service openings to seal before pupils return.
What to look for in a quote
- Will RAMS and insurance details be available?
- Their public liability cover
- Their plan for phasing and protecting the area
- Whether their applicators hold CSCS cards
Honest limits
Sealant solves a lot, but not everything, and we’re upfront when that’s the case. It won’t fix:
- Signing off or certifying a building’s fire stopping
- Plastic pipes whose detail calls for a collar or wrap
- Fire doors, dampers or other fire safety equipment
Not sure which it is? You can give us a call on 01277 525 020 or email us and we will tell you honestly before you book.
What we seal
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Service gaps in risers
- Cable penetrations
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
Building owners, agents and FMs in Bishopstone
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
How a job runs
Working in a building that stays open takes some planning. The work area is signed and kept contained, with routes through the building left open and move on in phases so staff and visitors can carry on around us. What matters most for a job in Bishopstone is a clear list of what needs doing. A fixed quote follows.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Preparing the site
- Make sure the joints can be reached
- For older buildings, check the asbestos register before work
- Let us know about inductions and permits
Quotes
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote that you can work with. For a chat about it beforehand, give us a call on 01277 525 020 or send details through our quote form.
Read more
Surface by surface
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access to these areas is planned with you in advance, including keys, permits and any isolations.
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers.
Fire stopping around Bishopstone: points for this area
Central London is about 55 miles from Bishopstone. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls. There are two care or nursing homes within about 2 miles of Bishopstone. Where new services have gone through compartment walls in a care setting, the gaps need the specified product.
For a building such as Church of St Mary the Virgin, new heating or data runs are the usual reason penetrations need sealing. At a healthcare site like Queen Victoria Memorial Hospital, which lies west of Bishopstone, new services through compartment walls are a constant, and each needs the specified seal.
Bishopstone is about 2 miles east of Herne Bay, in Kent. Anywhere in CT6, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Bishopstone is one of 931 places in Kent on our list. For work in that direction, see our London page.
Commercial sites across CT6 are covered. Among the streets we cover are Manor Road, Puffin Road and Neville Road. Close to Bishopstone, our area also takes in Hillborough (1 mile south), Beltinge (1 mile west), Hawthorn (1 mile south), Reculver (1 mile east) and Broomfield (1 mile south-west). Further afield, our area takes in Canterbury (8 miles south-west), Margate (9 miles east), Ramsgate (11 miles east), Broadstairs (11 miles east), Whitstable (6 miles west) and Deal (14 miles south-east).
Landmarks near Bishopstone
Recent enquiries here include premises near Bishopstone Cliffs, among other places. The nearest railway station is Herne Bay station, roughly 2.4 miles west. A little further out are Whitstable and Tankerton Hospital (5.3 miles west). Open spaces near Bishopstone include West Blean and Thornden Woods.