Fire stopping in Bishop's Sutton
Need fire stopping in Bishop's Sutton? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Damaged fire seals in risers and voids
- Fire-rated sealant that has cracked or shrunk back
- Fire-stopping items raised at inspection or handover
Fire stopping in Bishop's Sutton
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Why it’s worth doing now in Bishop's Sutton
Fire stopping is a regular point raised at inspections and handover. Late discoveries can delay handover while openings are reopened and resealed which is why earlier is better. Around Bishop's Sutton, it’s better to renew all the failing joints at once. Send photographs of each area and we’ll quote for the lot.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
Why us?
- One contact handling all your sites
- 12-month guarantee on workmanship
- Work carried out by CSCS-carded applicators
- CHAS accredited contractor
Take a look at how commercial sealant jobs are priced and our accreditations and insurance.
About our fire stopping in Bishop's Sutton
We should be clear about what we do and don’t do. Deciding the specification sits with the designer, the fire engineer and building control; sign-off sits with them too. What we bring is careful installation of the specified sealant, to the maker’s guidance on sites in Bishop's Sutton. We work on joints between fire-resisting walls and floors, linear gaps at wall heads and cable penetrations, and what we’re called in for most is openings found when ceilings come down for a refit and seals that don’t match their tested detail. Whoever orders the work in Bishop's Sutton, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
Smaller places such as Bishop's Sutton still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Bishop's Sutton (SO24)
- Wider area
- Hampshire
- Guarantee
- 12 months on every job
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
For managing agents and facilities managers
If you look after buildings for someone else, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Bishop's Sutton can sit alongside others in a wider programme across Hampshire.
Nearby places to Bishop's Sutton
What else we do in Bishop's Sutton
Honest limits
We check first that sealant really is the fix. It won’t put right:
- Plastic pipes whose detail calls for a collar or wrap
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Fire doors, dampers or other fire safety equipment
If in doubt, ring 01277 525 020 or email the details over and we will say what we think before you book.
Where we work in Bishop's Sutton
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Service gaps in risers
- Cable penetrations
Bishop's Sutton: questions and answers
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Bishop's Sutton?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Is a smaller place like Bishop's Sutton outside your area?
No. Small places get the same service as large ones. Our area covers London and the South East counties. Where we can, we group nearby jobs to make the most of each trip.
Who decides which product is used?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
How do I request a quote?
There are four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photographs and a postcode.
Can you quote from photos?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we’ll arrange a visit.
When can the area be used after sealing?
We’ll confirm how long the chosen product needs to cure, and sign any area that should be left alone.
Will you just go over the old sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Service penetrations in Bishop's Sutton buildings
In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. The area within 2 miles of Bishop's Sutton holds several hotels. In hotels, bedroom and corridor walls are normally fire-resisting, so services added in a refit need sealing with the specified product.
For a building such as Church of St Nicholas, new heating or data runs are the usual reason penetrations need sealing. Hotels such as The Swan Hotel, 1.4 miles to the west of Bishop's Sutton, rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified. Schools such as Perins School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Bishop's Sutton is about 8 miles south-west of Alton, in Hampshire. Any commercial site in Bishop's Sutton is covered, for single jobs and planned programmes alike. Across Hampshire, 723 places are covered, Bishop's Sutton among them. We also cover Southampton, around 16 miles from Bishop's Sutton.
Work on service penetrations is covered throughout SO24, for business premises of every kind. Buildings on North Street, Home Close and Water Lane are within our area for service penetrations. Close to Bishop's Sutton, our area also takes in Gundleton (1 mile north-east), New Alresford (2 miles west), Bramdean (2 miles south), Hinton Ampner (3 miles south) and Cheriton (3 miles south-west). Bigger towns within reach include Basingstoke (13 miles north), Winchester (8 miles west), Eastleigh (12 miles south-west), Horndean (13 miles south-east), Chandler's Ford (13 miles south-west) and Alton (8 miles north-east).
Near you in Bishop's Sutton
Around Bishop's Sutton, our work takes us to commercial buildings near Ship Inn and the streets around them. Well-known places in the area include Barton Castle (3.8 miles north). Not far away are Shutts Copse and Red Hill.
What affects the price in Bishop's Sutton
The price varies from site to site. It mainly depends on:
- Whether old sealant has to be cut out first
- Site requirements such as inductions and permits
- Working within restricted access windows
- How much there is to seal
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Before you send an enquiry
For an accurate fixed quote, we need to understand the site. Useful things to include:
- Approximate linear metres or a joint schedule
- Whether an asbestos survey exists
- The type of building and who uses it
- Photos of the joints, close up and from further back
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call 01277 525 020 or send details through our quote form with what you know.
How a job runs
At the end of each section, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area. For a building around Bishop's Sutton, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Before we start on site
- Have the specification and drawings to hand
- Tell us what induction or permit system the site runs
- Point out any areas we must not close
Request a quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, call the office on 01277 525 020 or email us.
Advice
What the job involves on each surface
Plastic pipes
In a fire, plastic pipework melts away and leaves an opening. Small sizes are sometimes covered by an intumescent sealant detail. We check the pipe material and diameter against the detail before we start.
Linear joints
Head-of-wall joints often have to absorb slab deflection. We use the product and backing the detail names for that movement, along the full length of the run.