Fire stopping in Eastleigh
Commercial sealant work in Eastleigh for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, quoted at a fixed price.
- Fire-stopping items raised at inspection or handover
- Unsealed openings around new pipes and cables
- Non-fire-rated filler around services
Fire stopping in Eastleigh
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Eastleigh
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. Each seal follows the manufacturer’s tested detail, not a rule of thumb. Most enquiries involve builders’ foam or ordinary silicone in compartment walls and snag lists that include open service penetrations, on pipe penetrations, small duct penetrations where the tested detail allows and joints between fire-resisting walls and floors. Whether you call it commercial sealant work, mastic application or joint sealing, in Eastleigh it comes down to the same thing: the right product in a properly prepared joint.
Older buildings in towns like Eastleigh have often been rewired and replumbed several times, with gaps around pipes and cables left after each change. Our applicators follow the product’s published detail for that wall or floor whenever fire-rated sealant is the chosen seal.
We stand behind the joints we seal: 12 months, guaranteed. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
Honest limits
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Walls or floors that aren’t fire-resisting to begin with
- Deciding what a wall or floor needs, which belongs to the designer
- Reviewing a building’s overall fire safety
Not sure which it is? You can phone 01277 525 020 or send details through our quote form and we will tell you honestly before you book.
Where we work in Eastleigh
- Linear gaps at wall heads
- Pipe penetrations
- Cable penetrations
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Service gaps in risers
Towns and villages near Eastleigh
Other services in Eastleigh
Do you need fire stopping in Eastleigh?
A common fault is a product that was never fire-rated in the first place: builders’ foam or ordinary silicone used to fill a hole. It may look closed, but it has no tested fire performance in that position.
If one of these sounds familiar, it’s time for a closer look:
- Open linear gaps along the top of fire-resisting walls
- Service penetrations left open after M&E works
- Damaged fire seals in risers and voids
- Fire-stopping items raised at inspection or handover
For a site team at a college like Eastleigh College - Desborough Campus, 0.6 miles south-west of Eastleigh, fire-rated sealing is best scheduled after the summer works.
Before you book anyone
- Their public liability cover
- Health and safety accreditation such as CHAS
- Whether primer will be used where the manufacturer specifies it
- What site paperwork they can supply
Compartment walls and floors in Eastleigh
A 2-mile radius around Eastleigh takes in several hotels. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail. Central London is about 65 miles from Eastleigh. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls.
On estates like Barton Park Industrial Estate (less than half a mile north-west of Eastleigh), the wall between office and warehouse is often fire-resisting, and cables through it need the specified seal. Wherever services are added at a hospital such as Wessex Hospital, 2.1 miles to the north of Eastleigh, the compartment line has to be made good with the specified product.
Eastleigh is about 4 miles north-east of Southampton, in Hampshire. Our applicators travel to Eastleigh for work on service penetrations, handled exactly as we handle every other area. Our Hampshire coverage takes in 723 places.
Commercial sites across SO50, SO30, SO31 and SO19 are covered for service penetrations. If your site is on Market Street, High Street and Scotter Square or close by, send details and we’ll quote for service penetrations. Main routes into Eastleigh include the A335 and B3033, which helps when planning parking and deliveries for the job. Sites close to Eastleigh are covered too, including Bishopstoke (1 mile east), Boyatt Wood (1 mile north-west), Allbrook (2 miles north), Lord's Wood (2 miles north-east) and Highbridge (2 miles north). Further afield, our area takes in Winchester (6 miles north), Gosport (14 miles south-east), Fareham (10 miles south-east), Horndean (15 miles east), Totton (8 miles south-west) and Hedge End (4 miles south-east). Eastleigh ranks among the main centres of Hampshire, with offices, shops, schools and other public and commercial buildings, and we cover them all.
Landmarks near Eastleigh
Recent enquiries here include premises near The Wagon Works pub, Lakeside Country Park and Quilley School of Engineering and the streets around them. Eastleigh has its own railway station: Eastleigh station. A little further out are Moorgreen Hospital (2.9 miles south) and Eastleigh Museum (less than half a mile west). For a walk, there’s Flexford Nature Reserve.
Our process
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. The work itself normally takes anything from one day to a planned run of visits, depending on the number of seals and the access, and we clear our waste as we work. Parking and loading for town-centre jobs in Eastleigh are worth mentioning when you send details. Industrial and business units usually have yard or car park space.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Let us know about inductions and permits
- Tell us your opening times and when work is allowed
- For older buildings, check the asbestos register before work
Getting a fixed quote
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.
Related advice
Quoting for work in Eastleigh
The price varies from site to site. It mainly depends on:
- How much existing material needs removing
- Any access equipment needed
- The product specified
- Whether the work must be split into stages
A quote for service penetrations depends on how many there are, their condition and the access. Call for a quote.
Before you send an enquiry
For an accurate fixed quote, we need a clear picture of the site. Send us:
- When you need the work done
- The type of building and who uses it
- Drawings or a marked-up plan, if available
- Specification clauses that apply
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to speak to us on 01277 525 020 or send photos by email with what you know.
Why deal with it now?
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. While the openings can be reached, sealing them is normally straightforward. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. Many buildings in towns like Eastleigh have been extended or altered, so joints between old and new are often the first to go. Renewing them before water gets in protects the fabric.
We don’t publish prices, since every building and every scope is different. For a fixed figure, call for a quote and we’ll price your job on its own details.
What you get with us
- Specification-led, product-correct work
- Fully insured, including public liability cover
- CHAS accredited contractor
- One phone line for London, the South East and Scotland
Take a look at how commercial sealant jobs are priced and our accreditations.
FAQs: Eastleigh
Can you work at a site such as Barton Park Industrial Estate, by Eastleigh?
Yes, sites like Barton Park Industrial Estate are within our area, along with the rest of Eastleigh. To start, just call 01277 525 020 or email us with the unit, the joints involved and your access times.
Is hospital work, at somewhere like Wessex Hospital, something you do?
Yes. We work in healthcare settings as well as offices and schools. Each area is agreed with the ward or department and the estates team in advance.
Can you handle several sites?
Yes. We take on portfolio and planned maintenance work, planned site by site to suit how each building is used.
Do you approve fire stopping for building control?
No. Sign-off belongs to the designer or building control, not the installer. We’ll confirm the product and detail installed and agree any further records when we quote.
How many days will you need on site?
The duration is planned around your programme and the access we are given. We will give you an estimate of time on site when we quote.
What’s the quickest route to a quote?
There are four steps: send details, get a quote, we seal, guaranteed. The first step only needs photographs and a postcode.
What about RAMS and site documents?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
Maintenance after handover
Cleaning and maintenance staff play a part too. Share these points with them:
- Treat an open penetration as a priority repair
- Record which product was used where
- Check with the data sheet before painting over fire sealant
- Get seals inspected before ceilings and boxing close
Once the seals are in, tell other trades they exist and must not be disturbed. If a seal has to be opened for a new service, it should be reinstated to the same detail using the same product.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. That way the opening is sealed while the trade and access are still there instead of being left for someone else.