Fire-rated sealing and fire stopping in Bingham, Edinburgh
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Bingham. Send details for a fixed quote.
- Builders’ foam or ordinary silicone in compartment walls
- Fire-rated sealant that has cracked or shrunk back
- Snag lists that include open service penetrations
Fire stopping in Bingham
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Bingham, done properly
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. Each seal follows the manufacturer’s tested detail, not a rule of thumb. Most enquiries involve seals disturbed by maintenance and left open and head-of-wall gaps with no fire seal, across pipe penetrations, linear gaps at wall heads and cable penetrations. Looking for mastic applicators who cover Bingham? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
Tenement blocks and converted stone buildings in Scottish cities often hide old service routes through walls and floors. Wall type and service type decide the product, so both are checked before sealing.
A 12-month guarantee applies to all our work. If an installation problem shows up, speak to us on 01277 525 020 or email us and we’ll arrange a return visit.
- Place
- Bingham (EH15, EH16, EH8)
- Region
- Edinburgh
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Your questions answered
What do Scotland’s building standards say about service penetrations in Bingham?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Can you seal penetrations in a hotel in Bingham after a refit?
Yes, where fire-rated sealant is the specified product. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we will tell you if the detail calls for a collar, wrap or batt instead.
Can you quote from photographs?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we will arrange a visit.
What will the job cost?
We don’t publish prices, because every site is different. With photos or drawings, we can give you a fixed quote.
How long before the joints can be used?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.
Can you work to our specification?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
How long does a typical visit take?
The duration is planned around your programme and the access we’re given. You will have an expected duration with the quote.
Common problems we fix in Bingham
Mixing products or improvising a detail breaks the link with the test evidence. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are the usual culprits.
Site and facilities staff are often the first to spot these:
- Hidden openings found during inspections
- Head-of-wall gaps with no fire seal
- Old intumescent sealant that has split away
- Service penetrations left open after M&E works
Workshops and IT rooms at colleges like Edinburgh College - Milton Road Campus, 1.1 miles to the east of Bingham, are re-serviced often, leaving penetrations to seal.
Before you book anyone
- The terms of the workmanship guarantee
- Who will actually carry out the work
- Is the sealant right for the movement and the substrate?
- Will failed sealant be removed rather than covered?
Compartments and services around Bingham
The area within 2 miles of Bingham holds a good number of hotels. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail. There are eight care or nursing homes within about 2 miles of Bingham. Care homes rely on fire-resisting walls and floors, and maintenance work that breaks through them leaves openings to seal. Where that’s fire-rated sealant, we install it to the manufacturer’s tested detail.
Large healthcare estates like Royal Infirmary of Edinburgh (Little France) (to the south of Bingham) change their services often, so penetration seals are worth checking after M&E work. For a unit at a site such as Craigmillar Shopping Centre (0.5 miles south-west of Bingham), any new service through a fire-resisting wall should be sealed to the tested detail.
Bingham is about 3 miles east of Edinburgh, in Edinburgh. Businesses, contractors and managing agents in Bingham use us for work on service penetrations, as part of our coverage of Edinburgh. Bingham is one of 174 places we cover in Edinburgh for service penetrations.
Postcode districts covered here: EH15, EH16 and EH8 for service penetrations. Streets here include Hay Avenue, Dunkirk Road and Harewood Road. Bingham sits on or close to the A6095 and A6106. If your building is just outside Bingham, we cover Niddrie Mains (1 mile south-east), Magdalene (1 mile north-east), Niddrie (1 mile south-east), Greendykes (1 mile south) and Craigmillar (1 mile south-west). Nearby towns on our patch include Edinburgh (3 miles west), Leith (3 miles north-west), Bonnington (3 miles north-west), Greenside (3 miles north-west), Broughton (3 miles north-west) and Bellevue (3 miles north-west).
What’s near Bingham
Locally, jobs take us to sites close to Portobello Library, Duddingston Kirk and Craigmillar Castle Park and the streets around them. The closest station to Bingham is Brunstane station, roughly 1 mile east of the centre. A little further out are Cameron Toll Shopping Centre (1.7 miles south-west) and Craigmillar Castle (1 mile south-west). Open spaces near Bingham include Whinny Hill and Duddingston Loch.
On site: what to expect
When we get to site, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before any cutting starts, and the work normally takes anything from one day to a planned run of visits, depending on the number of seals and the access. In a Scottish city, kerbside space and loading need planning, especially near the centre. Tenement closes, shared stairs and factor approvals may also be involved.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
What we need from you
- Tell us your opening times and when work is allowed
- Flag any permit to work we will need
- For older buildings, check the asbestos register before work
Getting a fixed quote
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. The easiest way is to give us a call on 01277 525 020 or use the quote form.
Related advice
Aftercare for building managers
For the best life from the joints:
- Leave fire sealant to cure fully before covering it
- Include service cupboards in routine inspections
- Arrange inspection before areas are covered up
- Record which product was used where
After every round of M&E works, check that the openings created have been sealed. Building it into each contractor’s sign-off keeps the walls intact.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. Then the seal goes in while the area is open, not months later.
Why deal with it now?
A seal that doesn’t match its tested detail gives false comfort. The fix is to remove it and reinstall to the detail, and doing it once, properly, is cheaper. Failed sealant in a shared building in Bingham can affect more than one owner. Fixing it promptly keeps repairs small.
The price depends on the quantity of joints, how much old material needs removing and the access. Call for a quote once you have the details.
Why us?
- CSCS-carded applicators
- One contact handling all your sites
- Specification-led, product-correct work
- A fixed quote before work starts
Read what affects the cost or our accreditations and insurance.
What affects the price in Bingham
Before we quote, we look at:
- Location, for remote and island sites
- Whether the work must be split into stages
- Quantities, in metres or numbers
- Which sealant the job calls for
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Before you send an enquiry
Good information means a firmer quote. When you get in touch, include:
- The site address and postcode
- Photos of the joints, close up and from further back
- Your programme or deadline
- Access details, including height
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Commercial clients in Bingham
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Sites in Bingham can sit alongside others in a wider programme.
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.