Fire-rated sealing and fire stopping in Aultbea, Highland
Fire-rated and intumescent sealing of service penetrations and linear gaps in Aultbea and across Highland. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Fire seals cut back for extra cables and never reinstated
- Old intumescent sealant that has split away
- Head-of-wall gaps with no fire seal
Need fire stopping in Aultbea?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Quoting for work in Aultbea
We price every job individually. The main factors are:
- Whether the work must be split into stages
- Specialist products, such as fire-rated or hygienic sealants
- Backing rod, priming and other preparation
- Any access equipment needed
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote and we will explain how it’s made up.
Sending details for a quote
The more we know, the firmer the quote. When you get in touch, include:
- The product your specification calls for
- Clear photographs of the problem areas
- The postcode of the building
- How the joints are reached, and at what height
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Fire stopping for commercial buildings in Aultbea
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, give us a call on 01277 525 020 or email the details over with the schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we will confirm with the quote. We work on small duct penetrations where the tested detail allows, service gaps in risers and pipe penetrations, and the failures we are asked to look at most are openings found when ceilings come down for a refit and old intumescent sealant that has split away. Searching for sealant specialists in Aultbea? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
Around smaller places such as Aultbea, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Place
- Aultbea (IV22)
- Wider area
- Highland
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Diagnose, treat, sign off
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Tell us who will meet us and how to get in at your building near Aultbea. We will confirm the plan with the fixed quote.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned first.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- Agree which areas must stay open
- Send asbestos survey details if the building is pre-2000
- Confirm the product named in the specification
Getting a fixed quote
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. To get it moving, ring 01277 525 020 or email us.
Advice
Leave it or put it right?
Open penetrations multiply: every new cable or pipe adds another. Keeping on top of it after each round of works keeps the job small. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Aultbea before they leak.
The price depends on the quantity of joints, how much old material needs removing and how the joints are reached. Call for a quote once you have the details.
Why choose Mastic Doctor in Aultbea
- Old sealant cut out, never sealed over
- Clear, fixed quotes
- Products installed to the manufacturer’s instructions
- A Constructionline member, so easy to vet
Take a look at how commercial sealant jobs are priced or our accreditations.
What the job involves on each surface
Small ducts
Small ductwork can sometimes be sealed with sealant where the tested detail includes it. Bigger ducts and fire-resisting ductwork are normally handled with other products and we flag that rather than guess.
Drylining partitions
Plasterboard partitions are tested as a specific construction. We check that the product’s detail covers that partition type and board thickness.
Site staff or a sealant specialist?
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Fire-rated sealing for Aultbea buildings
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, using products tested for the way they’re used. We install fire-rated sealant to that tested detail where it is specified.
Hotels such as Drumchork Lodge Hotel, less than half a mile to the south of Aultbea, rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified. In a building such as Aultbea Church, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Aultbea is in Highland. Anywhere in IV22, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. 256 places across Highland fall within our area, including Aultbea.
We take on service penetrations across the IV22 postcode area, whatever the building. Sites close to Aultbea are covered too, including Àird (1 mile west), Laide (2 miles north-east), Inverasdale (4 miles south-west), Poolewe (5 miles south) and Gairloch (9 miles south-west). For island and remote sites, we plan travel and materials carefully, so include the location in your enquiry.
Landmarks near Aultbea
Nearby you will also find Arctic Convoy Museum (less than half a mile north-west). Not far away are Loch a' Bhaid-luachraich.
Also in Aultbea
After the work
Keep the joints in good shape with a few simple steps:
- Treat an open penetration as a priority repair
- Include service cupboards in routine inspections
- Keep product data and details in the fire safety file
- Agree the fire-stopping specification before services go in
During planned inspections, look at seals in risers, cupboards and voids. Watch for cracked sealant, new services with no seal and openings that have grown.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. That way the opening is sealed while the trade and access are still there instead of being left for someone else.
Aultbea: questions and answers
Is a smaller place like Aultbea outside your area?
Not at all: smaller places are covered as well as towns. We cover the whole of Scotland. Good photographs up front let us bring everything on the first visit.
Which Scottish guidance covers penetration seals in Aultbea?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
How do you choose the sealant?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Do you offer coloured sealant?
That depends on the product. Some ranges offer many colours, others very few, so we will confirm the colours available for the specified product with the quote.
Is it fine to apply new sealant on top of old?
No. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, tell us and we will confirm them with the quote.
Does weather matter for sealant work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.