Fire stopping in Ancrum
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Ancrum and nearby, by CSCS-carded applicators. CHAS accredited and fully insured.
- Hidden openings found during inspections
- Old intumescent sealant that has split away
- Open linear gaps along the top of fire-resisting walls
Fire stopping for businesses in Ancrum
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping for commercial buildings in Ancrum
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We hold no third-party fire-stopping installer certificate. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. Most enquiries involve damaged fire seals in risers and voids and expanding foam used as fire stopping, on linear gaps at wall heads, joints between fire-resisting walls and floors and service gaps in risers. Most enquiries from Ancrum start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
In smaller Scottish places like Ancrum, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
We stand by our work with a 12-month guarantee. That covers our preparation and application, and if something we did falls short, we return to it.
- Place
- Ancrum (TD8)
- Region
- Scottish Borders
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Questions about Ancrum
Can you work at a site such as Station Industrial Estate, by Ancrum?
Yes. We cover Ancrum and the area around it, including industrial estates, business parks and retail parks such as Station Industrial Estate. A few photos and the unit address let us price the work.
What do Scotland’s building standards say about service penetrations in Ancrum?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Do you guarantee your work?
Yes. Our workmanship is backed for 12 months.
How soon can the area be used again?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, so we will confirm the curing time on the day.
How many days will you need on site?
It depends on the scope, but the work typically takes a single visit for a short list of penetrations, or a phased programme for a whole building. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Can you quote from photographs?
It depends on the job. Straightforward work can often be priced from photos and measurements, and bigger or more complex jobs typically get a visit.
Can the sealant be colour-matched?
It depends on the product. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
Should maintenance staff do it?
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Fire-rated sealing for Ancrum buildings
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
In a building such as Ancrum Old Parish Church, any service penetration through a fire-resisting wall should be sealed to the specified detail. Where a unit on an estate such as Station Industrial Estate, 2.4 miles to the south-east of Ancrum, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Ancrum is about 10 miles north-east of Hawick, in the Scottish Borders. Our applicators travel to Ancrum for work on service penetrations. 91 places across the Scottish Borders fall within our area, including Ancrum. Our Edinburgh page has more on work in that area (38 miles or so).
Commercial sites across TD8 are covered for service penetrations. If your site is on North Myrescroft, Myrescroft Road and West Myrescroft or close by, send details and we’ll quote for service penetrations. If your building is just outside Ancrum, we cover Jedburgh (3 miles south-east), Nisbet (3 miles east), Belses (4 miles west), Maxton (4 miles north) and Greycrook (4 miles north-west). Further afield, our area takes in Galashiels (11 miles north-west), Hawick (10 miles south-west), Kelso (9 miles north-east), Selkirk (10 miles west), Wilton (10 miles south-west) and Melrose (8 miles north-west).
What’s near Ancrum
Other landmarks nearby include Queen Mary's House (2.8 miles south-east) and Timpendean Tower (1.2 miles south). Not far away are Wooden Loch and Peniel Heugh.
For managing agents and facilities managers
CHAS accredited and a Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Ancrum can sit alongside others in a wider programme.
Quoting for work in Ancrum
Before we quote, we look at:
- How much existing material needs removing
- Induction, permit and paperwork requirements
- The size and state of each joint
- How accessible the joints are
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
What to include in your enquiry
However big the job, the same details help:
- Approximate linear metres or a joint schedule
- Any specification or named product
- A wide shot and a close-up of the area
- Whether an asbestos survey exists
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call the office on 01277 525 020 or use the quote form with what you know.
How the job changes by surface
Drylining partitions
Plasterboard partitions are tested as a specific construction. We check that the product’s detail covers that partition type and board thickness first.
Linear joints
Linear joints run along the head of a wall, at a slab edge or between two fire-resisting elements. Their tested detail, under BS EN 1366-4, sets the width, depth, backing and movement allowed.
Why it’s worth doing now in Ancrum
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. Openings are visible, access is open and nothing has to be taken down. For buildings near Ancrum, dealing with all the failing joints at once saves return trips. Send photographs and we will quote for everything together.
What a job costs comes down to the quantity of joints, how much old material needs removing and the access. Call for a fixed quote once you have the details.
What you get with us
- 12-month guarantee on workmanship
- Public liability insurance in place
- Constructionline member
- Sealing commercial buildings since 2005
See our cost guide and how we’re accredited.
What else we do in Ancrum
On site: what to expect
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Jobs near Ancrum are often grouped with others in the same area, to make the most of each trip. Tell us how flexible your dates are.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Preparing the site
- Let building users know which areas are affected
- Send your site hours and access windows
- Tell us what induction or permit system the site runs
Quotes
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or speak to us on 01277 525 020 or email us to discuss it first.