The Stocks facade sealing
Facade joint and window perimeter sealing on commercial buildings throughout The Stocks and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Failed seals around shopfront and entrance frames
- Unsightly perimeter sealant on a visible elevation
- Water coming in around window frames
Facade sealing for businesses in The Stocks
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Facades, frames and programmes in The Stocks
Central London is about 49 miles from The Stocks. Construction around the commuter belt mixes station-side flats with refurbished offices and units, and main contractors there need mastic that keeps to the programme. The Stocks is in the South East, one of the UK’s drier regions. Even so, frost and condensation on steel and glass are common on winter mornings, which is why external dates are agreed with the site manager.
School extensions, at buildings such as Wittersham Church of England Primary School, normally run to the summer holidays, mastic included.
The Stocks is about 11 miles south-west of Ashford, in Kent. Across the TN30 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. The Stocks is one of 931 places we cover in Kent for facade joints. Brighton is covered too, some 39 miles away.
We take on facade joints across the TN30 postcode area, for business premises of every kind. We cover commercial and managed buildings on Stocks Road, Budd's Lane and Wittersham Road. We also cover Acton (1 mile north), Wittersham (1 mile west), Stone Corner (1 mile north), Stone in Oxney (2 miles east) and Reading Street (2 miles north-east). Nearby towns on our patch include Ashford (11 miles north-east), Tenterden (4 miles north), Kennington (13 miles north-east), New Romney (10 miles east), Staplehurst (13 miles north-west) and Stanhope (10 miles north-east).
What’s near The Stocks
Locally, jobs take us to sites close to The Ewe And Lamb Inn, among other places. The Stocks’s nearest station is Rye station, about 4.2 miles south of the centre. Nearby you will also find Smallhythe Place (2 miles north-west) and Ypres Tower (4.4 miles south). Open spaces near The Stocks include Flatropers Wood.
About our facade sealing in The Stocks
Our facade sealing work covers external facade joints, window and door perimeters, cladding panel joints and the perimeter joints where frames meet the structure on offices, blocks and industrial units. Where sealant is the specified fix, we also take on coping and flashing joints. We work on window and door perimeters, coping and flashing joints and cladding panel joints, and the usual reasons a site gets in touch are draughts around frames and panels and hard, chalky sealant that no longer flexes. Most enquiries from The Stocks start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
In the countryside around places like The Stocks, conversion schemes put new frames into old stone, flint, brick or timber. A product that grips an irregular face, with a colour that suits the building’s character, is usually what’s needed.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- The Stocks (TN30)
- Region
- Kent
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Building owners, agents and FMs in The Stocks
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. The Stocks can form part of a wider programme across Kent.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
What sealant work can’t fix
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- Leaks from roofs, gutters or failed flashings rather than sealant joints
- Damaged frames that need replacing
- Movement beyond what any sealant can handle
If in doubt, speak to us on 01277 525 020 or email a schedule or drawings and we’ll say what we think.
Surfaces we seal
- Stone and brick facade joints
- Window and door perimeters
- Cladding panel joints
- Shopfront frames
- Perimeter joints where frames meet the structure
- Coping and flashing joints
What affects the price in The Stocks
Your fixed quote is built from the real scope. It takes account of:
- Whether the work must be split into stages
- Joint width, depth and condition
- The site’s rules and procedures
- How accessible the joints are
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
Before you send an enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- Any specification or named product
- Asbestos survey details if the building is older
- Drawings or a marked-up plan, if available
- How the joints are reached, and at what height
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
What we’re called out for in The Stocks
Cohesive failure, a split through the middle of the bead, points to an over-stretched joint. The joint may be too narrow, the bead too thin or the sealant the wrong movement class.
Clients usually get in touch after noticing one or more of the following:
- Staining on stone next to old sealant
- Failed seals around shopfront and entrance frames
- New sealant peeling off old mastic
- Draughts around frames and panels
Older buildings in the area around The Stocks, such as Smallhythe Place, which lies north-west of The Stocks, need care when sealed: the product has to suit soft or historic materials.
What to look for in a quote
- Will RAMS and insurance details be available?
- How the joint faces will be prepared and primed
- How the existing material will be dealt with
- Their public liability cover
Common questions from The Stocks clients
What paperwork can you provide for a job in The Stocks?
We’ll confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. We are CHAS accredited and a Constructionline member, with £5m public liability insurance and CSCS-carded applicators.
Can you keep pace with our programme in The Stocks?
Yes, we work to the programme and the sequence the site sets. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Are you CHAS accredited and on Constructionline?
Yes. We’re CHAS accredited and a Constructionline member, which helps with supplier vetting.
Can you work to our specification?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
Can you quote from photographs?
It depends on the job. Simple work can often be priced from photos, while larger or less clear jobs get a site visit first.
How long do sealant joints last?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Is it fine to apply new sealant on top of old?
No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Places near The Stocks
Also in The Stocks
What the job involves on each surface
Cladding panel joints
Where panels are sealed rather than open-jointed, the bead is part of the weather line. We cut out failed joints along their full length and rebuild them with backing and a facade-grade sealant.
Brick and stone facades
Joints in natural stone need care to avoid staining. The specified stone-compatible sealant is what we use, with masked edges for a clean line.
On site: what to expect
Before we leave any area, we remove the tape, clean down and inspect every joint with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. Rural sites near The Stocks may need directions, gate codes or a contact on site. Send that with the details and we will confirm the plan with the quote.
- We start with photos, drawings or a visit to see the joints and agree access.
- Product choice follows the joint’s movement and substrate.
- Failed beads are removed in full and the joint faces cleaned.
- Primer is applied where the maker specifies it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
Before we start on site
- Tell us what induction or permit system the site runs
- Tell staff and tenants when we will be in
- Arrange parking or a loading space
Get a fixed quote
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. To get it moving, call the office on 01277 525 020 or email a schedule or drawings.