Tenterden facade sealing
Work needed on a facade joint in Tenterden? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Old perimeter mastic that has dried out
- Weathered joints at frame-to-structure perimeters
- Staining on stone next to old sealant
Facade sealing near Tenterden
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Facade sealing for commercial buildings in Tenterden
Managing agents and owners in Tenterden ask us to, we reseal perimeters across whole elevations or a handful of problem windows. The approach doesn’t change with the size: old sealant out, faces cleaned, depth set and a new bead tooled in. A 12-month guarantee applies to our workmanship. We work on cladding panel joints, perimeter joints where frames meet the structure and coping and flashing joints, and the usual reasons a site gets in touch are facade joints cracked through the middle and draughts around frames and panels. For commercial sealant work in Tenterden, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
On a small site around Tenterden, the mastic is best done in the fewest visits we can manage. Tell us when scaffold comes down and when decoration finishes, and we’ll plan around those stages.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Location
- Tenterden (TN30)
- Region
- Kent
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
On site: what to expect
Site rules come first: sign-in, induction and whatever permit system the building uses. Once we’re cleared to begin, we take the joints in the sequence agreed with you. If neighbouring businesses or buildings around Tenterden need work too, visits can be combined. Mention the building’s opening times and we will work within them.
- We start with photographs, drawings or a visit to see the joints and agree access.
- We confirm the joint type, movement and the specified product.
- The existing bead comes out in full.
- Primer is applied where the maker specifies it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- We go over the completed work with you before leaving.
Getting the site ready
- Tell us your opening times and when work is allowed
- Share the asbestos register for older buildings
- Have the specification and drawings to hand
Request a quote
To get a fixed quote, ring 01277 525 020 or use the quote form. Our quote form is another easy route.
Related advice
Keeping the joints sound
After handover, a little attention goes a long way:
- Add perimeter sealant to planned maintenance checks
- Combine resealing with other works that need access
- Note when each elevation was last resealed
- Brief window cleaners about newly sealed joints
Look at perimeter and panel joints as part of routine building checks. Watch for splits, gaps at the edges, hardening and discolouration.
Deal with sections that fail early as soon as they show. Small repairs stop small leaks becoming large ones inside the building.
How the job changes by surface
Coping and flashing joints
Coping and flashing joints are included where sealant is the specified fix. They sit in the most exposed positions on the building, so preparation and product choice matter.
Brick and stone facades
On masonry, the sealant has to suit a porous, textured surface. Neutral-cure products are used because acetoxy types can mark some stone, with primer where its maker specifies.
Facade sealing around Tenterden: what changes locally
The South East is one of the drier parts of the UK. Winter mornings still bring frost and condensation on frames and panels, so the external programme keeps a little slack. Tenterden lies roughly 45 miles out from central London. Building activity in the commuter belt runs from new flats near stations to business park refurbishments, which keeps mastic packages in demand.
Hotels like The Woolpack Hotel, under half a mile to the south-west of Tenterden, rarely close for long, so refurbishment mastic is phased floor by floor. When units on a site such as Pickhill Business Centre (1.1 miles south of Tenterden) are refurbished or reclad, the panel joints and window perimeters are part of the mastic package.
Tenterden is about 9 miles south-west of Ashford, in Kent. Tenterden sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Kent, 931 places are covered, Tenterden among them. We also cover Brighton, around 39 miles from Tenterden.
We take on facade joints across the TN30 postcode area, whatever the building. If your site is on Golden Square, High Street and Station Road or close by, send details and we’ll quote for facade joints. Main routes into Tenterden include the A28 and B2067, useful when we plan access and materials. Close to Tenterden, our area also takes in Broad Tenterden (1 mile south), St Michaels (1 mile north), Strood (2 miles west), London Beach (2 miles north) and Parkgate (2 miles north-west). Bigger towns within reach include Maidstone (15 miles north-west), Ashford (9 miles north-east), Paddock Wood (15 miles north-west), Bearsted (15 miles north), Park Wood (13 miles north-west) and Kennington (11 miles north-east).
Around Tenterden
Around Tenterden, our work takes us to commercial buildings near Turners Field, The Vine Inn and Homewood School and Sixth Form Centre and the streets around them. Well-known places in the area include Tenterden and District Museum (under half a mile west) and Benenden Hospital (3.4 miles west).
Questions about Tenterden
Is hospital work, at somewhere like West View Hospital, something you do?
Yes. We work in healthcare settings as well as offices and schools. Work is phased so departments keep running, under the site’s own rules.
Is Tenterden too far out for you?
No. Places such as Tenterden are covered as much as the big towns. Our area covers London and the South East counties. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
How long does a typical visit take?
The duration is planned around your programme and the access we’re given. You’ll have an expected duration with the quote.
How do we ask for a quote?
There are four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photographs and a postcode.
Are you fully insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Do you run new sealant over the existing bead?
No. Overlaying is a shortcut that peels away quickly. Our method is a full cut-out, cleaning, backing and a new bead.
Can weather delay the job?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
Also near Tenterden
More services for Tenterden
Building owners, agents and FMs in Tenterden
If you look after buildings for someone else, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
What happens if it’s left?
The longer a failed joint is left, the more the substrate suffers: wet edges break down, so repairs may be needed before resealing. Early action keeps it simple. Over time, UV, weather and movement wear any sealant out. Replacing it before it fails keeps water out.
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote.
Why appoint us
- A Constructionline member, so easy to vet
- Sealing commercial buildings since 2005
- RAL and finish matching where the product range allows
- Health and safety: CHAS accredited
Take a look at what affects the cost or how we’re accredited.
Signs you need facade sealing in Tenterden
Not every failure is in the sealant: if the edge of the render, concrete or coating breaks away, the bead goes with it. We tell you when the edges need repairing before resealing.
Any of the following is a good reason to get the joints checked over:
- Hard, chalky sealant that no longer flexes
- Previous reseals run over old sealant
- Sealant pulling away from frames or panels
- Leaks at window and door perimeters
With historic properties like Smallhythe Place (2.2 miles south of Tenterden) in the area, refurbishment work often meets old masonry that needs compatible sealants.
Questions to ask before you book
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- What the guarantee covers, and for how long
- Who will actually carry out the work
- Proof of insurance