Facade Sealing contractors in Temple Mills
We carry out facade joint and window perimeter sealing on commercial buildings in Temple Mills. Send details for a fixed quote.
- Weathered joints at frame-to-structure perimeters
- Perimeter sealant that has split or peeled away
- Water coming in around window frames
Facade sealing near Temple Mills
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
When it isn’t the sealant
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- Damp caused by condensation inside the building
- Specialist high-level access methods
- Damaged frames that need replacing
If you’re not sure, just speak to us on 01277 525 020 or email drawings and photos and we will give you a straight answer.
What we seal
- Perimeter joints where frames meet the structure
- Stone and brick facade joints
- Shopfront frames
- Cladding panel joints
- Coping and flashing joints
- Window and door perimeters
Facade sealing in Temple Mills
Some clients need every window on a block resealed; others need a few leaking frames sorted. The approach doesn’t change with the size: cut out, clean, back, prime where needed and seal. Each job carries our 12-month guarantee. Most enquiries involve damp patches beside frames after rain and previous reseals run over old sealant, on coping and flashing joints, window and door perimeters and shopfront frames. One point of contact handles commercial sealant work in Temple Mills from the first photographs to the final walk-round, for single jobs and planned programmes alike.
Around Temple Mills, as across London, much of the work is refurbishing existing buildings as well as building new ones. Replacement windows, recladding and fit-outs leave perimeter and facade joints to seal, often next to people still using the building, so tidy, well-planned work matters.
Our workmanship is guaranteed for 12 months, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Where
- Temple Mills (E20, E15, E9)
- Region
- Greater London
- Guarantee
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
How the job changes by surface
Perimeter joints at frames and structure
The joint around a framed system, where it meets the structure, needs sealant. We seal those perimeter joints rather than the system it surrounds.
Cladding panel joints
Panel joints on cladding and rainscreen systems take movement every day. We use a product rated for the movement and suited to the panel surface, often a low-modulus silicone or hybrid.
Questions about Temple Mills
Will you take on work at estates like Leyton Mills Retail Park, close to Temple Mills?
Yes. Our area takes in Temple Mills and its surroundings, with estates and business parks such as Leyton Mills Retail Park included. Photos and a short description are enough for a first look.
Can you cope with the access rules in a London building?
Yes. Inductions, permits and timed loading are routine for us in London. Say when the building is occupied and when it’s quiet, and we will plan accordingly. We allow for the ULEZ, which covers every borough
How long do sealant joints last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Are you insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Does weather matter for sealant work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Can you find out why a window is leaking?
Yes. We check the sealant joints and report what we find as part of pricing. Where the cause seems to be elsewhere, we’d rather tell you than reseal pointlessly.
Is the work guaranteed?
Yes, for 12 months. If our installation fails in that time, we return and fix it.
When to call us in Temple Mills
Cohesive failure, a split through the middle of the bead, points to an over-stretched joint. Too thin a bead, too narrow a joint or a product with the wrong movement class are common reasons.
Site and facilities staff are often the first to spot these:
- Discoloured or dirty facade joints
- Leaks at window and door perimeters
- Failed seals around shopfront and entrance frames
- Sealant pulling away from frames or panels
Projects at colleges like International College of Musical Theatre, 0.6 miles south-west of Temple Mills, tend to run to term dates, so the mastic is planned tightly.
What to look for in a quote
- Will CSCS-carded applicators be on site?
- How the joint faces will be prepared and primed
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Their public liability cover
Our process
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. In Temple Mills, most buildings stay in use during the work, so zones and timings are agreed with whoever manages the building. Areas are handed back as each section is finished.
- We plan access and the order of elevations with the client.
- We only seal when joints are dry and within the product’s temperature range.
- We remove the old bead and check the edges are sound.
- Faces are cleaned, primed where needed and backed.
- Facade-grade sealant goes in and is tooled to a tidy concave profile.
- Once signed off, the work carries our 12-month guarantee.
Preparing the site
- Move anything stored against the joints
- Send your site hours and access windows
- Point out any areas we must not close
Getting a fixed quote
To get a fixed quote, ring 01277 525 020 or use the quote form, telling us the site location and the nature of the job. You can also send details through our quote form.
Related advice
Building and refurbishing in Temple Mills
There are a good number of hotels within about 2 miles of Temple Mills. Hotel schemes tend to have fixed reopening dates, so the mastic is programmed tightly with the other trades. Site traffic in Temple Mills falls within London’s ULEZ, like everywhere else in Greater London. Delivery slots and scarce storage shape how and when the mastic goes in.
Extensions at sites like Homerton University Hospital (1.4 miles west of Temple Mills) normally sit beside working departments, and the mastic follows strict access rules. Recladding or extending a unit at a site like Leyton Mills Retail Park (to the north-east of Temple Mills) brings panel joints and frame perimeters into the programme.
Temple Mills is about 1 mile north-west of Stratford, in Greater London. We cover Temple Mills and the rest of Greater London, with the same fixed quotes and 12-month guarantee as everywhere else. Our Greater London coverage takes in 764 places.
Postcode districts covered here: E20, E15 and E9 for facade joints. If your site is on Major Road, Forbes Lane and Keirin Road or close by, send details and we will quote for facade joints. Main routes into Temple Mills include the A106. Just outside Temple Mills, we also work in East Village (1 mile south-east), Hackney Wick (1 mile south-west), Stratford (1 mile south-east), Maryland (1 mile south-east) and Fish Island (1 mile south-west). Further afield, our area takes in London (5 miles south-west), City of Westminster (6 miles west), Marylebone (6 miles west), Kensington (9 miles south-west), St Pancras (5 miles west) and Shoreditch (3 miles south-west).
Near you in Temple Mills
In Temple Mills, that means premises near Mabley Green, Mossbourne Riverside Academy and Eton Manor Boys' Club, among other places. There’s a railway station in Temple Mills itself: Stratford International station. Other landmarks nearby include V&A East (0.6 miles south) and Westfield Stratford City (under half a mile south-east). The countryside around Temple Mills includes Tower Hill and Hollow Pond.
How the quote is worked out
These are the things that shape the price:
- Travel to remote or island sites
- Backing rod, priming and other preparation
- Working within restricted access windows
- The product specified
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
Details that help us quote
Good information means a firmer quote. When you get in touch, include:
- Access details, including height
- Whether an asbestos survey exists
- Rough lengths or quantities, or drawings if you have them
- Any specification or named product
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings that you can work with. For a chat about it beforehand, ring 01277 525 020 or email the details over.
When to bring in a specialist
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.