Stroud facade sealing
Planning work on a facade joint in Stroud? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Discoloured or dirty facade joints
- Perimeter joints where frames meet the structure
- Old perimeter mastic that has dried out
Facade sealing for Stroud sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Common questions from Stroud clients
Is a smaller place like Stroud outside your area?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.
Can you keep pace with our programme in Stroud?
Yes. The mastic is planned around your key stages. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Is your workmanship covered by a guarantee?
Yes. Our workmanship is backed for 12 months.
Should we check old sealant for asbestos?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Check the asbestos register or survey before it is disturbed; if it’s suspected, work stops until it has been tested. Removal of asbestos isn’t something we do.
How do I request a quote?
It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photos and a postcode.
Do you work to architects’ specifications?
Yes. Send it with your enquiry, and the quote will be based on it.
Is any job too small?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
Facade sealing for commercial buildings in Stroud
Managing agents and owners in Stroud ask us to, we reseal perimeters across whole elevations or a handful of problem windows. Either way, the method is the same: old sealant out, faces cleaned, depth set and a new bead tooled in. Each job carries our 12-month guarantee. We work on coping and flashing joints, window and door perimeters and perimeter joints where frames meet the structure, and the failures we are asked to look at most are draughts around frames and panels and staining on stone next to old sealant. One point of contact handles commercial sealant work in Stroud from the first photographs to the final walk-round, whether it’s one building or several.
Construction in and around smaller places such as Stroud is often barn conversions, small groups of houses or extensions to halls and schools. Perimeters, facade joints and internal sealant all need doing properly, however small the scheme.
Our workmanship is guaranteed for 12 months, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Stroud (GU32)
- Region
- Hampshire
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Also near Stroud
Other services in Stroud
What we can’t put right
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Replacing glass or failed glazing units
- Damaged frames that need replacing
- Water getting in through cracked render or porous masonry
If in doubt, phone 01277 525 020 or send details through our quote form and we will say what we think.
Where we work in Stroud
- Shopfront frames
- Window and door perimeters
- Stone and brick facade joints
- Coping and flashing joints
- Perimeter joints where frames meet the structure
- Cladding panel joints
Building owners, agents and FMs in Stroud
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Stroud can form part of a wider programme.
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong typically costs more in the end than doing them right.
Our process
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area. Jobs in and around smaller places like Stroud are typically planned as a single visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- We start with photographs, drawings or a visit to see the joints and agree access.
- Product choice follows the joint’s movement and substrate.
- The existing bead comes out in full and the joint faces cleaned.
- Primer goes on where the product data asks for it.
- Rod goes in to fix the depth, then the joint is sealed and tooled.
- We go over the completed work with you before leaving.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Tell us what induction or permit system the site runs
- Explain the parking and delivery arrangements
Get a fixed quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Advice
New build and refits around Stroud
Stroud is about 51 miles from central London. Construction around the commuter belt mixes station-side flats with refurbished offices and units, which keeps mastic packages in demand. Stroud sits in one of the drier corners of the country, the South East. That doesn’t stop wet spells, or frosty starts that leave panels too damp to seal, so the external programme keeps a little slack.
Projects at schools like Langrish Primary School work to term dates, so mastic is programmed tightly.
Stroud is about 2 miles west of Petersfield, in Hampshire. Our applicators travel to Stroud for work on facade joints, handled exactly as we handle every other area. Our Hampshire coverage takes in 723 places, from busy centres to rural villages. Sites around Portsmouth have their own page, roughly 15 miles from Stroud.
Anyone looking for facade sealing in GU32 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. For a building on Winchester Road, Stroudfields and Ramsdean Road or nearby, we can quote for facade joints. Sites close to Stroud are covered too, including Langrish (1 mile west), Petersfield (2 miles east), Froxfield Green (2 miles north-west), Steep (2 miles north-east) and High Cross (2 miles north). Nearby towns on our patch include Winchester (15 miles west), Havant (10 miles south), Fareham (15 miles south-west), Horndean (7 miles south), Alton (10 miles north) and Waterlooville (9 miles south).
What’s near Stroud
Locally, jobs take us to sites close to The Petersfield School, Morton House School and Seven Stars pub. The nearest railway station is Petersfield station, about 1.3 miles east of the centre. Other landmarks nearby include Petersfield Community Hospital (1.3 miles east) and Clanfield Earthwork (4.2 miles south). The countryside around Stroud includes Liss Riverside Railway Walk South and Pidham Hill.
Do you need facade sealing in Stroud?
Sun, rain and temperature swings wear facade sealant down over the years. The bead hardens, chalks on the surface and loses the flexibility to follow the joint, and cracks or adhesion loss follow.
These are often picked up first by site or facilities staff:
- Facade joints cracked through the middle
- Failed sealant on precast panel joints
- Cold air coming in at window perimeters
- Discoloured or dirty facade joints
Extensions at sites like Petersfield Hospital, 1.3 miles to the east of Stroud, normally sit beside working departments, and the mastic follows strict access rules.
What to look for in a quote
- Whether their applicators hold CSCS cards
- Which product they’ll use, and why it suits the joint
- Their public liability cover
- How the joint faces will be prepared and primed
Leave it or put it right?
If access is already up for other work, resealing at the same time makes sense. Coordinating facade sealing with other external works avoids paying for access twice. Halls, stores and units around places like Stroud may not be checked every day, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
What you get with us
- 12-month guarantee on workmanship
- Colours confirmed for the specified product
- CHAS accredited
- CSCS-carded applicators
Take a look at how commercial sealant jobs are priced and our accreditations.