Facade Sealing in Shalden
Commercial sealant work in Shalden for contractors, FMs and building owners: facade joint and window perimeter sealing on commercial buildings, quoted at a fixed price.
- Cold air coming in at window perimeters
- Staining on stone next to old sealant
- Perimeter sealant that has split or peeled away
Facade sealing for Shalden sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle facade sealing in Shalden
Facade joints are the line of defence between the weather and the building fabric. When a perimeter bead splits or peels, water finds its way behind frames and into the structure. We remove failed sealant and install a new bead chosen for the joint and how far it moves. We work on cladding panel joints, shopfront frames and stone and brick facade joints, and the failures we’re asked to look at most are draughts around frames and panels and previous reseals run over old sealant. A single leaking joint is often how a building in Shalden first comes to us: we look at the rest while we’re there and tell you what we find.
For a site near Shalden, the mastic visit is planned so the right sealants, primers and backing rod are on hand. Send drawings or photographs and the programme and we’ll quote to suit.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Shalden (GU34)
- Region
- Hampshire
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Diagnose, treat, sign off
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Jobs in and around smaller places like Shalden are usually planned as a single visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- We look at the joints, the drawings and the access before pricing.
- The old bead is cut away completely, not overlaid.
- Joint faces are cleaned to firm, sound material, with primer where the sealant maker specifies it.
- Closed-cell rod fixes the depth, and the sealant grips two sides only.
- A facade-grade sealant rated for the movement goes in, tooled to a concave profile.
- The completed runs are checked with you, then the 12-month guarantee applies.
What we need from you
- Share the asbestos register for older buildings
- Send any specification or drawings in advance
- Arrange parking or a loading space
Quotes
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to give us a call on 01277 525 020 or email drawings and photos.
Read more
Common questions from Shalden clients
Can you work at a site such as Kerridge Industrial Estate, by Shalden?
Yes. Our area takes in Shalden and its surroundings, with estates and business parks such as Kerridge Industrial Estate included. To start, just ring 01277 525 020 or use the quote form with the unit, the joints involved and your access times.
Is Shalden too far out for you?
Not at all: smaller places are covered as well as towns. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.
Do you take on small jobs?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
Is the work guaranteed?
Yes. Our workmanship is backed for 12 months.
Can you work while the building is occupied?
Normally, yes. We phase the work so most of the building stays in use.
Will you come and look before quoting?
It depends on the job. Simple work can often be priced from photos, while larger or less clear jobs get a site visit first.
Do we need an asbestos check before resealing?
It’s worth checking in any building from before 2000. The dutyholder holds the asbestos register. If asbestos is suspected, work stops until it is tested.
New build and refits around Shalden
Shalden lies roughly 45 miles out from central London. Commuter-belt towns tend to see a steady flow of new flats, offices and commercial schemes, so mastic packages have to keep pace with busy programmes. Rainfall across the South East, Shalden included, is lower than in many parts of the UK. That doesn’t stop wet spells, or frosty starts that leave panels too damp to seal, so external mastic is timed for workable conditions and agreed with the site manager.
New wings at hospitals like Alton Community Hospital (to the south of Shalden) bring long runs of window and panel joints to seal. For contractors refurbishing units at places like Kerridge Industrial Estate (2.1 miles south-east of Shalden), the mastic covers cladding panels, roller-door and window perimeters.
Shalden is about 2 miles north-west of Alton, in Hampshire. Our applicators travel to Shalden for work on facade joints. Shalden is one of 723 places we cover in Hampshire for facade joints. Reading is covered too, some 19 miles away.
Commercial sites across GU34 are covered. If your site is on Southwood Road, Stancombe Lane and Shalden Lane or close by, we can quote for facade joints. We also cover Shalden Green (1 mile north), Thedden (2 miles south-west), Beech (2 miles south), Bentworth (2 miles south-west) and Southrope (2 miles north-west) for facade joints. A short drive away, we cover Basingstoke (8 miles north-west), Farnborough (13 miles north-east), Fleet (10 miles north-east), Aldershot (12 miles north-east), Petersfield (12 miles south) and Yateley (14 miles north-east).
What’s near Shalden
Shalden’s nearest station is Alton station, roughly 2.1 miles south-east. Well-known places in the area include Gliding Heritage Centre (1.3 miles north-west) and Alton Community Hospital (2.3 miles south). Not far away are Holybourne Hill.
Do you need facade sealing in Shalden?
Sometimes the substrate is the problem: crumbling render, spalling concrete or flaking paint take the sealant with them. When the joint edges need repair first, we say so.
Look out for the following:
- Old perimeter mastic that has dried out
- Cladding panel joints that have opened up
- Cold air coming in at window perimeters
- Staining on stone next to old sealant
Historic houses such as Hall Place (to the south-west of Shalden) are a reminder of the older buildings in the wider area, where sealing against old stone, brick or timber needs compatible products.
Comparing quotes
- How they handle RAMS and site documents
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Their plan for phasing and protecting the area
- Their public liability cover
What sealant work can’t fix
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- Movement beyond what any sealant can handle
- Damp caused by condensation inside the building
- Replacing glass or failed glazing units
If you’re not sure, just call the office on 01277 525 020 or send photos by email and we’ll give you a straight answer before you book.
Surfaces we seal
- Stone and brick facade joints
- Cladding panel joints
- Window and door perimeters
- Shopfront frames
- Perimeter joints where frames meet the structure
- Coping and flashing joints
Maintenance after handover
After handover, these steps help:
- Brief window cleaners about newly sealed joints
- Check the asbestos register before old mastic is disturbed
- Avoid patch repairs on failed facade joints
- Keep sills, gutters and drainage paths clear
Let the new sealant cure before washing the facade or windows near it. Pressure washers and harsh cleaners can damage a fresh bead and tell your cleaning contractor.
Get the joint design right when resealing: correct depth, proper backing and a sealant that can take the movement. A well-designed joint lasts longer than a like-for-like copy of a failed one.
Why deal with it now?
Leaving failed perimeter sealant also makes the eventual job bigger: wet edges break down, so repairs may be needed before resealing. Acting at the first sign of splitting keeps the fix simple. Older rural buildings around Shalden move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we’ll explain how it’s made up.
Why us?
- Health and safety: CHAS accredited
- Clear, fixed quotes
- Our applicators hold CSCS cards
- Joints cleaned back to sound surfaces
Read how commercial sealant jobs are priced or our accreditations.
General trades versus a specialist
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.