Facade Sealing contractors in Bentworth
We carry out facade joint and window perimeter sealing on commercial buildings in Bentworth and the surrounding area. Send details for a fixed quote.
- Draughts around frames and panels
- Weathered facade joints that have lost their grip
- Cladding panel joints that have opened up
Facade sealing across Bentworth
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Looking after the joints
For the best life from the joints:
- Avoid patch repairs on failed facade joints
- Keep pressure washers away from fresh sealant
- Walk the elevations once or twice a year
- Record the product and colour used on each elevation
Record the sealant type and date on the building file. Future work can then match the product and colour across the elevation.
Coordinate facade sealing with other external works. One set-up for several trades saves money and cuts time on site.
Facade sealing in Bentworth
We are often asked to look at water coming in around frames. Very often the perimeter bead has cracked or lost its grip. If the evidence points away from the sealant, we say so before quoting. We work on coping and flashing joints, cladding panel joints and shopfront frames, and the usual reasons a site gets in touch are damp patches beside frames after rain and weathered facade joints that have lost their grip. A single leaking joint is often how a building in Bentworth first comes to us: we look at the rest while we’re there and tell you what we find.
In the countryside around places like Bentworth, conversion schemes put new frames into old stone, flint, brick or timber. Those joints need a sealant that suits an uneven, sometimes porous surface, and often a colour chosen for the building.
We stand by our work: 12 months, guaranteed. That covers our preparation and application, and if something we did falls short, we return to it.
- Location
- Bentworth (GU34)
- Wider area
- Hampshire
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
On site: what to expect
On arrival, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before any cutting starts, and the work typically takes longer on a full elevation than on a handful of window perimeters, and it always depends on dry weather. For a building around Bentworth, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- We start with photographs, drawings or a visit to see the joints and agree access.
- We confirm the joint type, movement and the specified product.
- The existing bead comes out in full and the joint faces cleaned.
- Primer is applied where the maker specifies it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- We go over the completed work with you before leaving.
What we need from you
- Explain the parking and delivery arrangements
- Move anything stored against the joints
- Let building users know which areas are affected
Ask for a quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, call 01277 525 020 or use the quote form.
Advice
New build and refits around Bentworth
Bentworth lies roughly 47 miles out from central London. Construction around the commuter belt mixes station-side flats with refurbished offices and units, so mastic packages have to keep pace with busy programmes. Rainfall across the South East, Bentworth included, is lower than in many parts of the UK. Winter mornings still bring frost and condensation on frames and panels, so we time external mastic for dry faces and agree it with the site team.
Older buildings in the area around Bentworth, such as Hall Place (0.2 miles south-west of Bentworth), need care when sealed: the product has to suit soft or historic materials. For contractors refurbishing units at places like Barton Industrial Estate, 2.8 miles south-west of Bentworth, the mastic covers cladding panels, roller-door and window perimeters. New wings at hospitals like Alton Community Hospital (to the south-east of Bentworth) bring long runs of window and panel joints to seal.
Bentworth is about 3 miles west of Alton, in Hampshire. Commercial clients in Bentworth can call on us for facade joints, as part of our coverage of Hampshire. Bentworth is one of 723 places in Hampshire on our list. Reading is covered too, some 20 miles away.
We cover the GU34 postcode districts for facade joints. Among the streets we cover are Village Street, Church Street and Drury Lane, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Holt End (1 mile south-west), Thedden (1 mile south-east), Wivelrod (1 mile south-east), New Copse (1 mile south-west) and Beech (2 miles south-east) for facade joints. Further afield, our area takes in Basingstoke (8 miles north), Winchester (13 miles south-west), Farnborough (15 miles north-east), Fleet (12 miles north-east), Aldershot (14 miles north-east) and Alton (3 miles east).
What’s near Bentworth
Locally, jobs take us to sites close to The Star Inn, among other places. Bentworth’s nearest station is Alton station, roughly 3.5 miles east of the centre. Nearby you will also find Barton Castle (3.2 miles south-west) and Gliding Heritage Centre (2.2 miles north-east). Open spaces near Bentworth include King's Hill.
More services for Bentworth
Questions about Bentworth
Is Bentworth too far out for you?
No. Places such as Bentworth are covered as much as the big towns. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Can you work at a site such as Barton Industrial Estate, by Bentworth?
Yes. We cover Bentworth and the area around it, including industrial estates, business parks and retail parks such as Barton Industrial Estate. Send details of the unit and the work through our quote form for a quick quote.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we’ll arrange a visit before quoting.
How long do sealant joints last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Will you just go over the old sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
What do you charge?
Every job gets its own fixed quote. For yours, phone 01277 525 020 or email the details over.
Is any job too small?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
Building owners, agents and FMs in Bentworth
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Bentworth can form part of a wider programme across Hampshire.
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end.
Why it’s worth doing now in Bentworth
Patch repairs over old sealant tend to come back. A full cut-out and fresh bead is the repair that holds. For buildings around smaller places like Bentworth, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
A quote for facade joints depends on how many there are, their condition and the access. Call for a quote.
Why appoint us
- Fixed quotes based on photos, drawings or a visit
- Work to your specification and the manufacturer’s guidance
- One number for every site we cover
- Colour agreed before work starts
Take a look at how commercial sealant jobs are priced or our accreditations and insurance.
When it isn’t the sealant
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Replacing glass or failed glazing units
- Render or concrete edges that have broken away
- Providing access systems for the work
If in doubt, call 01277 525 020 or send photos by email and we will say what we think before you book.
Surfaces we seal
- Stone and brick facade joints
- Perimeter joints where frames meet the structure
- Window and door perimeters
- Coping and flashing joints
- Shopfront frames
- Cladding panel joints
Doing it in-house
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.