Facade and window perimeter sealing in Pitland Street, Surrey
We carry out facade joint and window perimeter sealing on commercial buildings in Pitland Street and the surrounding area. Send photos or drawings for a fixed quote.
- Air leaks through failed facade joints
- Perimeter sealant that has split or peeled away
- Discoloured or dirty facade joints
Facade sealing for businesses in Pitland Street
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Aftercare for building managers
Once the work is signed off, a little attention goes a long way:
- Keep sills, gutters and drainage paths clear
- Plan facade sealing alongside redecoration
- Ask about asbestos in pre-2000 mastic
- Record the product and colour used on each elevation
Keep a note of which product went in and when. It helps when matching repairs or planning the next reseal.
Use each reseal to correct the joint: the right width, backing rod and a sealant with enough movement capability. Repeating a faulty detail just repeats the failure.
About our facade sealing in Pitland Street
Installing framed glazing systems isn’t part of our work. What we seal are the joints around them: perimeter joints where frames meet the structure, panel joints and window perimeters, using sealants classified for facade or glazing use. If you are dealing with unsightly perimeter sealant on a visible elevation and damp patches beside frames after rain, we can help. Whoever orders the work in Pitland Street, the brief is usually the same: a clear scope, tidy work and joints that don’t fail again.
For a site near Pitland Street, the mastic visit is planned so the right sealants, primers and backing rod are on hand. Send drawings or photos and the programme and we will quote to suit.
Every job we finish is backed by a 12-month workmanship guarantee. If our installation lets you down in that time, we return and fix it.
- Where
- Pitland Street (RH5)
- Wider area
- Surrey
- Cover
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
From enquiry to sign-off
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. Rural sites near Pitland Street may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- We plan access and the order of elevations with the client.
- We only seal when joints are dry and within the product’s temperature range.
- We remove the old bead and check the edges are sound.
- Faces are cleaned, primed where needed and backed.
- Sealant is gunned in and tooled hard onto both faces.
- Once signed off, the work carries our 12-month guarantee.
What we need from you
- Flag any permit to work we’ll need
- Explain the parking and delivery arrangements
- Share your working hours and any access restrictions
Request a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, speak to us on 01277 525 020 or email us.
Read more
Questions we’re asked in Pitland Street
Is Pitland Street too small for you to travel to?
No. Small places get the same service as large ones. London and every South East county are within our area. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Which documents can you supply for work in Pitland Street?
We will confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. Our applicators are CSCS-carded, and we carry £5m public liability insurance.
How long do sealant joints last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit.
How many days will you need on site?
We plan the time on site around your programme and access. We’ll give you an estimate of time on site when we quote.
Can you work on upper floors?
That comes down to the access arranged for the job. Share what access exists or is planned when you send details.
Which sealant will you use?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Leave it or put it right?
Open facade joints also let air and dirt through: occupants notice draughts and cold spots around windows. A new seal closes the gap for both. Older rural buildings around Pitland Street move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote and we’ll price your job on its own details.
Why choose Mastic Doctor in Pitland Street
- Fixed quotes based on photos, drawings or a visit
- Standard and matched colours in many product ranges
- Our applicators hold CSCS cards
- CHAS accredited contractor
Take a look at what affects the cost or our accreditations.
Do you need facade sealing in Pitland Street?
Overlaying old sealant is a common shortcut that fails quickly. Cured silicone won’t accept a new silicone bead.
Site and facilities staff are often the first to spot these:
- Weathered facade joints that have lost their grip
- Staining on stone next to old sealant
- Failed sealant on precast panel joints
- Water coming in around window frames
On any site in or around Pitland Street, the mastic follows the specification and the programme.
What your quote should include
- What the guarantee covers, and for how long
- Their plan for phasing and protecting the area
- Will CSCS-carded applicators be on site?
- How joint depth will be controlled
Should maintenance staff do it?
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
New build and refits around Pitland Street
Pitland Street is in the South East, one of the UK’s drier regions. Even so, frost and condensation on steel and glass are common on winter mornings, so we time external mastic for dry faces and agree it with the site team. At about 26 miles from central London, Pitland Street is within reach of the capital. Towns within reach of London tend to keep building, from flats to offices and schools, and each scheme needs its mastic sealed to programme.
For contractors at a school such as Belmont Prep School, sealing has to be finished before term starts.
Pitland Street is about 5 miles south-west of Dorking, in Surrey. Across the RH5 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 379 places in Surrey. There’s a separate page for London, about 26 miles away.
We cover the RH5 postcode districts. If your site is on Horsham Road, Pitland Street and Holmbury Hill Road or close by, send details and we will quote for facade joints. Just outside Pitland Street, we also work in Holmbury St Mary (1 mile north), Peaslake (2 miles west), Ewhurst (3 miles south-west), Ewhurst Green (3 miles south) and Mayes Green (3 miles south). A short drive away, we cover Guildford (8 miles north-west), Woking (12 miles north-west), Epsom (12 miles north-east), Horley (10 miles east), Redhill (11 miles east) and Ewell (13 miles north-east).
Near you in Pitland Street
Locally, jobs take us to sites close to Hurtwood House and Wotton and Abinger Commons, among other places. The closest station to Pitland Street is Gomshall station, about 2.7 miles north-west. Other landmarks nearby include Abinger Castle (1.2 miles north) and Mesolithic Museum (1.2 miles north). The countryside around Pitland Street includes Vann Lake and Leith Hill.
Towns and villages near Pitland Street
What else we do in Pitland Street
What sets the cost
Sealant work doesn’t have a standard rate, because every site is different. What we look at:
- The product specified
- How much there is to seal
- Joint width, depth and condition
- Any access equipment needed
The product called for affects the cost, as does the preparation each joint needs. Access, phasing and site requirements come into it too.
What we need to price the job
Good information means a firmer quote. Helpful details to send:
- The postcode of the building
- The product your specification calls for
- Photos of the joints, close up and from further back
- Whether the building will be occupied during the work
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, speak to us on 01277 525 020 or email a schedule or drawings.