The Mastic Doctor team standing beside their branded vans outside an office building
Surrey · England

Pitland Street coloured sealant

Planning work on a colour-matched joint in Pitland Street? We look at it, seal it with the right product and hand it over with a 12-month guarantee.

  • Poorly tooled joints on visible finishes
  • Fit-outs with a sealant colour in the specification
  • Joints that need to match a new RAL frame colour
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
Scope agreed and priced before anything starts.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
Covering the South East & Scotland
CHAS & Constructionline
£5m public liability

Coloured sealant for Pitland Street sites

Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.

Cost factors for colour-matched joints

Before we quote, we look at:

  • The size and state of each joint
  • How much there is to seal
  • The product specified
  • Access and working height

Pricing colour-matched joints depends on how many there are, their condition and the access, and any specification that applies. Call for a quote.

Sending details for a quote

We can often quote from photographs and a few details. It helps to include:

  • A wide shot and a close-up of the area
  • Anything awkward about access or site hours
  • Any specification or named product
  • The asbestos register, for older buildings

Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, speak to us on 01277 525 020 or email drawings and photos.

Coloured sealant in Pitland Street

Architects, designers and brand teams often specify the sealant colour as carefully as the finishes around it. Standard sealant ranges cover many colours, so we check what the specified product is made in. We don’t promise an exact custom match, but we’ll show you the closest options. If you have coloured joints that have cracked with movement and white or grey sealant that clashes with the finish, we can put it right, whatever the surface. A specialist sealant contractor works differently from a general builder: on jobs in Pitland Street, preparation and product choice get the time they need.

Rural business units near smaller places such as Pitland Street are frequently converted agricultural buildings. Old masonry beside new aluminium, timber and plasterboard gives plenty of joints between materials that move differently, and a sealant colour that suits the building’s character is often part of the brief.

Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If our installation lets you down in that time, we return and fix it.

Place
Pitland Street (RH5)
Region
Surrey
Cover
A 12-month guarantee
Quote
Quoted before any work starts
Call
01277 525 020
Last updated
3 November 2026
The Mastic Doctor team beside their liveried vans in front of an office building

What happens if it’s left?

Across a chain of shops or hotels, consistency matters. Fixing the colour reference at the start keeps every site the same from one fit-out to the next. Converted and older buildings near places like Pitland Street tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.

Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.

What you get with us

  • Matching to RAL references, product permitting
  • Commercial sealant work since 2005
  • Coloured sealants to suit the setting, where available
  • One phone line for London, the South East and Scotland

Read what affects the cost and our accreditations and insurance.

Questions we’re asked in Pitland Street

Can the sealant on our Pitland Street premises match the finishes?

Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. Send colour references or photos and we’ll confirm what’s available for the product.

Which documents can you supply for work in Pitland Street?

RAMS, insurance certificate, CSCS details: list what the site needs and we will confirm it with the quote. Our applicators are CSCS-carded, and we carry £5m public liability insurance.

What do you charge?

That depends on the job: quantities, access, the product and any phasing. Call for a quote.

Do you guarantee your work?

Yes. The 12-month guarantee covers our preparation and application, though not damage or work by other trades.

Can you work while the building is occupied?

Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.

Can weather delay the job?

It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.

How long does a typical visit take?

That varies with the scale of the job, but the work normally takes a few hours or a phased programme, depending on joint lengths and how many colours are involved. For bigger or phased jobs, we’ll set out a timescale with the quote.

How the job changes by surface

Shop-fit and joinery finishes

In shops, joints are at eye level and inspected by customers. Clean masking and neat tooling matter as much as colour.

Powder-coated and anodised frames

Window, door and shopfront frames in RAL colours often need a sealant to suit. We compare the reference with the specified product’s colour range, and you confirm the choice.

Our process

We schedule the visit to fit the site hours and access windows you give us. While we’re working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. Jobs in and around smaller places like Pitland Street are typically planned as a single visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.

  1. We confirm the product the joint needs before talking about colour.
  2. Colour references, samples or photos of the finish are checked against the product’s range.
  3. Where colour is critical, a sample bead can be agreed in a discreet spot.
  4. We take out the existing bead, clean the joints and fit backing.
  5. The coloured sealant is applied and tooled with clean, masked edges.

Preparing the site

  • Share your working hours and any access restrictions
  • Have the specification and drawings to hand
  • Explain the parking and delivery arrangements

Quotes

Pricing a project or setting a maintenance budget? We will quote against your scope and drawings you can plan around. For a chat about it beforehand, call 01277 525 020 or use the quote form.

Get a quick quote

Advice

Aftercare for building managers

Problems stay small when the joints are checked regularly. Specifically:

  • Settle the colour with the designer at the start
  • Don’t let trades patch coloured joints with a random sealant
  • Note which sealant colour was used where
  • Brief cleaners about newly sealed joints

Colours can soften with light and weathering. That is normal for exposed sealant.

Use one product and colour reference across a building or brand. Consistency makes future work simpler for whoever reseals next.

Shops, offices and hotels in and around Pitland Street

At about 26 miles from central London, Pitland Street is within reach of the capital. Business parks and retail centres are common around the capital’s motorway corridors. Firms with branches across the South East can use one contractor for every site. The South East is one of the drier parts of the UK. That helps, but frost and condensation on glass and coated frames still stop outside sealing on some winter mornings.

Premises within reach of Gomshall station, 2.7 miles north-west of Pitland Street, often have busy frontages where joints are seen by everyone passing. For any commercial premises in Pitland Street, a lasting joint depends on full removal of the old sealant and clean, dry faces.

Pitland Street is about 5 miles south-west of Dorking, in Surrey. We cover Pitland Street, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. 379 places across Surrey fall within our area, Pitland Street among them. London is covered too, around 26 miles from Pitland Street.

We cover the RH5 postcode districts. Among the streets we cover are Horsham Road, Pitland Street and Holmbury Hill Road, and sites on any of them can send details for a fixed quote. Close to Pitland Street, our area also takes in Holmbury St Mary (1 mile north), Peaslake (2 miles west), Ewhurst (3 miles south-west), Ewhurst Green (3 miles south) and Mayes Green (3 miles south). Further afield, our area takes in Guildford (8 miles north-west), Woking (12 miles north-west), Epsom (12 miles north-east), Horley (10 miles east), Redhill (11 miles east) and Ewell (13 miles north-east).

Around Pitland Street

Recent enquiries here include premises near Hurtwood House and Wotton and Abinger Commons. Pitland Street’s nearest station is Gomshall station, roughly 2.7 miles north-west. Well-known places in the area include Abinger Castle (1.2 miles north) and Mesolithic Museum (1.2 miles north). Green spaces nearby include Vann Lake and Leith Hill.

Map of Pitland Street © OpenStreetMap contributors

Building owners, agents and FMs in Pitland Street

Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.

Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.

Accreditations

Trusted. Accredited. Insured.