Facade and window perimeter sealing in Ovingdean, Brighton and Hove
Planning work on a facade joint in Ovingdean? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Leaks at window and door perimeters
- Patch repairs that keep failing
- Perimeter joints where frames meet the structure
Facade sealing across Ovingdean
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Quoting for work in Ovingdean
The price varies from site to site. Expect it to depend on:
- Phasing around occupants
- Location, for remote and island sites
- Backing rod, priming and other preparation
- The product specified
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Details that help us quote
The more we know, the firmer the quote. Helpful details to send:
- Whether an asbestos survey exists
- Anything awkward about access or site hours
- Whether the building will be occupied during the work
- Clear photos of the problem areas
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or call 01277 525 020 or email drawings and photos to discuss it first.
About our facade sealing in Ovingdean
Weather decides a lot in facade sealing. The sealant needs a dry joint and temperatures inside the maker’s limits, and cold, damp starts can delay work. We plan for that and keep you updated. We work on shopfront frames, stone and brick facade joints and perimeter joints where frames meet the structure, and the failures we’re asked to look at most are sealant pulling away from frames or panels and failed sealant on precast panel joints. Looking for mastic applicators who cover Ovingdean? We’ve been sealing commercial buildings since 2005.
Construction in and around smaller places such as Ovingdean is often barn conversions, small groups of houses or extensions to halls and schools. Perimeters, facade joints and internal sealant all need doing properly, however small the scheme.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Location
- Ovingdean (BN2)
- Region
- Brighton and Hove
- Cover
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Owners, agents and contractors
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Also near Ovingdean
What else we do in Ovingdean
How a job runs
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. Jobs in and around smaller places like Ovingdean are typically planned as a single visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- We start with photos, drawings or a visit to see the joints and agree access.
- We confirm the joint type, movement and the specified product.
- Failed beads are removed in full and the joint faces cleaned.
- Primer is applied where the maker specifies it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
What we need from you
- Move anything stored against the joints
- Let us know about inductions and permits
- Arrange parking or a loading space
Getting a fixed quote
For a fixed quote, phone 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. You can also send details through our quote form.
Advice
Site staff or a sealant specialist?
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Keeping the joints sound
After handover, a little attention goes a long way:
- Investigate damp beside windows promptly
- Brief window cleaners about newly sealed joints
- Avoid patch repairs on failed facade joints
- Check the asbestos register before old mastic is disturbed
Blocked sills and gutters push water at the joints. Good drainage keeps water moving off the facade instead of soaking the joints.
Tie resealing in with redecoration, cladding repairs or other access. Sharing the access keeps the cost down and limits disruption.
When it isn’t the sealant
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Arranging specialist high-level access, which is planned with the client
- Water getting in through cracked render or porous masonry
- Installing or repairing glazing systems
If you’re not sure, just give us a call on 01277 525 020 or email drawings and photos and we will give you a straight answer before you book.
Where we work in Ovingdean
- Stone and brick facade joints
- Window and door perimeters
- Cladding panel joints
- Shopfront frames
- Coping and flashing joints
- Perimeter joints where frames meet the structure
Ovingdean: questions and answers
Does a coastal location like Ovingdean affect which sealant is used?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Do you cover business parks and estates near Ovingdean, such as Bell Tower Industrial Estate?
Yes. We cover Ovingdean and the area around it, including industrial estates, business parks and retail parks such as Bell Tower Industrial Estate. A few photos and the unit address let us price the work.
Will you check whether the sealant is causing the leak?
Yes. We look at the perimeter sealant and tell you whether it has failed as part of pricing. Where the cause seems to be elsewhere, we’d rather tell you than reseal pointlessly.
Do you guarantee your work?
Yes. The 12-month guarantee covers our preparation and application, but not damage, misuse or other trades’ work.
Can you quote from photographs?
That depends on the size and complexity of the job. Simple work can often be priced from photos, and bigger or more complex jobs typically get a visit.
What site paperwork can you supply?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
Do we need an asbestos check before resealing?
It’s worth checking in any building from before 2000. The duty to manage asbestos sits with the dutyholder. If asbestos is suspected, work stops until it is tested.
New build and refits around Ovingdean
With the shore within about 1 mile, Ovingdean counts as a coastal location. On a coastal site, facade and perimeter joints face driven rain and, closer to the beach, salt, so joint design, primers and product choice deserve extra care. The area within 2 miles of Ovingdean holds several hotels. Hotel schemes tend to have fixed reopening dates, so the mastic is programmed tightly with the other trades.
On a campus such as University of Brighton, 2.8 miles north-west of Ovingdean, new teaching buildings and residences are usually built and refurbished around the academic year. Hospital estates such as Nuffield Health Brighton Hospital (to the north of Ovingdean) tend to grow and change in phases, often next to occupied wards, so facade and perimeter sealing has to fit the estates team’s plan. When units on a site such as Bell Tower Industrial Estate, 1.4 miles west of Ovingdean, are refurbished or reclad, the panel joints and window perimeters are part of the mastic package.
Ovingdean is about 3 miles south-east of Hanover, in Brighton and Hove. We send applicators to Ovingdean for facade joints. Ovingdean is one of 29 places we cover in Brighton and Hove for facade joints.
We cover the BN2 postcode districts for facade joints. For a building on Longhill Road, Ovingdean Road and Wanderdown Road or nearby, we can quote for facade joints. Sites close to Ovingdean are covered too, including Rottingdean (1 mile east), Roedean (1 mile west), Saltdean (2 miles south-east), East Saltdean (2 miles south-east) and Telscombe (3 miles east). Further afield, our area takes in Brighton (3 miles north-west), Brighton and Hove (5 miles west), Hove (4 miles west), Carlton Hill (3 miles west), Hanover (3 miles north-west) and West Hill (3 miles west).
Near you in Ovingdean
In Ovingdean, that means premises near Beacon Hill, Our Lady of Lourdes RC School and Duck Inn and the streets around them. Ovingdean’s nearest station is Moulsecoomb station, about 3 miles north-west of the centre. Nearby you’ll also find Brighton Motor Museum (1.9 miles west) and French Convalescent Home (1.5 miles west). For a walk, there’s Newmarket Hill and Beacon Hill Local Nature Reserve.