Facade Sealing in Meikleour
Facade sealing in Meikleour, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Cladding panel joints that have opened up
- Facade joints cracked through the middle
- Leaks at window and door perimeters
Facade sealing near Meikleour
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Facade sealing in Meikleour
We are often asked to look at water coming in around frames. Failed perimeter sealant is a frequent cause, but not always. We’ll tell you if we think the leak is coming from somewhere sealant won’t fix. We work on window and door perimeters, perimeter joints where frames meet the structure and stone and brick facade joints, and the usual reasons a site gets in touch are facade joints cracked through the middle and cladding panel joints that have opened up. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Meikleour is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Construction around smaller Scottish places like Meikleour is often one-off schemes: a school, a health centre, a hotel extension or a few houses. Exposed elevations in Scotland put facade and perimeter joints to work from day one, so the sealant choice matters.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Where
- Meikleour (PH2)
- Wider area
- Perth and Kinross
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Different surfaces, different methods
Brick and stone facades
Joints in natural stone need care to avoid staining. We use a product suitable for the stone where the specification names one, with masked edges for a clean line.
Perimeter joints at frames and structure
Perimeter joints at frames often show their age first. They are cut out, cleaned, backed and resealed with a product suited to glazing perimeters.
Places near Meikleour
Other services in Meikleour
Site staff or a sealant specialist?
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Why deal with it now?
Open facade joints also let air and dirt through: draughts around frames add to heating costs and complaints. Resealing deals with the draught as well as the leak. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, giving water time to get in. Early resealing prevents it.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why choose Mastic Doctor in Meikleour
- Fully insured
- CHAS accredited
- One phone line for London, the South East and Scotland
- RAL and finish matching where the product range allows
Read what affects the cost and our accreditations and insurance.
How a job runs
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Travel to smaller Scottish places like Meikleour is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. External joints need a dry spell as well.
- Access, site rules and timing are settled with the client up front.
- We only seal when joints are dry and within the product’s temperature range.
- Each joint is cut out and the edges inspected.
- Faces are cleaned, primed where needed and backed.
- Facade-grade sealant goes in and is tooled to a tidy concave profile.
- We hand over with our 12-month workmanship guarantee.
Preparing the site
- Tell us which areas need to stay in use
- Confirm the product named in the specification
- Point out parking and an unloading spot
Get a fixed quote
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or ring 01277 525 020 or email drawings and photos to discuss it first.
Related advice
Common questions from Meikleour clients
Can you keep pace with our programme in Meikleour?
Yes. The mastic is planned around your key stages. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Is Meikleour too far out for you?
Not at all: smaller places are covered as well as towns. Our area covers all of Scotland, cities, towns and islands alike. Where we can, we group nearby jobs to make the most of each trip.
Can staff carry on working while you are here?
Yes, with some planning. Tell us your site hours and access windows and we will plan around them.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Do you guarantee your work?
Yes. Workmanship is guaranteed for 12 months on every job.
How long does a job like this take?
That varies with the scale of the job, but the work typically takes longer on a full elevation than on a handful of window perimeters, and it always depends on dry weather. For bigger or phased jobs, we will set out a timescale with the quote.
New build and refits around Meikleour
A 2-mile radius around Meikleour takes in a number of hotels. Hotel refurbishments often run to tight programmes between busy periods, and perimeter and sanitary sealant has to keep up. Projects in Meikleour follow Scotland’s building regulations, with the local authority acting as verifier. The mastic package follows the approved specification.
Work at a hotel such as Meikleour Arms Hotel & Restaurant (to the north of Meikleour) tends to be programmed around bookings, mastic included. New wings at hospitals like Blairgowrie Community Hospital, 3.3 miles to the north of Meikleour, bring long runs of window and panel joints to seal.
Meikleour is about 4 miles south of Blairgowrie and Rattray, in Perth and Kinross. We send applicators to Meikleour for facade joints, handled exactly as we handle every other area. We work across 114 places in Perth and Kinross, from busy centres to rural villages. For work in that direction, see our Dundee page, about 16 miles away.
Business premises anywhere in PH2 are within our area for facade joints. We cover commercial and managed buildings on Mercer Green, Old Military Road and Carsie Road. If your building is just outside Meikleour, we cover Carsie (2 miles north-east), Burrelton (3 miles south-east), Woodside (3 miles south-east), Spittalfield (3 miles west) and Kinloch (3 miles north). Nearby towns on our patch include Perth (10 miles south), Blairgowrie and Rattray (4 miles north), Letham (10 miles south-west), Scone (8 miles south), Tulloch (10 miles south-west) and Alyth (8 miles north-east).
Landmarks near Meikleour
We work on buildings around Meikleour Hotel, among other places. Well-known places in the area include Kinclaven Castle (1.1 miles south) and Blairgowrie Community Hospital (3.3 miles north). Green spaces nearby include Fingask Loch.
Work for main contractors and building owners
Building owners and managing agents use us on everything from one building to a spread of sites around Meikleour. Several sites can go on one quote, which keeps the paperwork simple.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
When it isn’t the sealant
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. These need a different solution:
- Installing or repairing glazing systems
- Movement beyond what any sealant can handle
- Water getting in through cracked render or porous masonry
If in doubt, phone 01277 525 020 or send photos by email and we will say what we think.
Surfaces we seal
- Window and door perimeters
- Coping and flashing joints
- Stone and brick facade joints
- Shopfront frames
- Perimeter joints where frames meet the structure
- Cladding panel joints