Facade Sealing contractors in Lewiston
Work needed on a facade joint in Lewiston? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Patch repairs that keep failing
- Hard, chalky sealant that no longer flexes
- Gaps between rainscreen or cladding panels
Facade sealing in Lewiston
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
What happens if it’s left?
Each spell of rain drives water past a failed facade joint. Behind the frame, that can mean damp plaster, stained ceilings, corroded fixings and damaged insulation. Resealing now costs less than repairing interiors later. Around smaller places like Lewiston, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Early resealing prevents it.
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
What you get with us
- One contact handling all your sites
- Matching to RAL references, product permitting
- Over 20 years of commercial sealing
- Colour agreed before work starts
Take a look at what affects the cost and our accreditations and insurance.
Facade sealing in Lewiston, done properly
We seal window and door perimeters, cladding panel joints, external facade joints and perimeter joints where frames meet the structure on offices, blocks and industrial units. Coping and flashing joints are included where sealant is the specified fix. Site teams most often ask us about staining on stone next to old sealant and new sealant peeling off old mastic, across coping and flashing joints, window and door perimeters and cladding panel joints. For commercial sealant work in Lewiston, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
For a site around Lewiston, we plan the mastic in as few trips as the programme allows. Clear drawings, a programme and photos let us bring the right sealants, primers and backing rod first time.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, give us a call on 01277 525 020 or email us and we’ll come back to it.
- Place
- Lewiston (IV63)
- Region
- Highland
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Cost factors for facade joints
A fixed quote reflects the actual work. It allows for:
- Which sealant the job calls for
- Removal of failed or old sealant
- How accessible the joints are
- Joint width, depth and condition
The specified product makes a difference, as does the preparation each joint needs. Access, phasing and site rules also count.
What to include in your enquiry
For an accurate fixed quote, we need a clear picture of the site. Send us:
- Approximate linear metres or a joint schedule
- Photos of the joints, close up and from further back
- Access details, including height
- The product your specification calls for
Need a figure for a tender or a budget? We’ll quote against your scope and drawings that you can work with. If you have questions first, phone 01277 525 020 or email drawings and photos.
Facade sealing around Lewiston: points for this area
In Lewiston, as across Scotland, building warrants are issued by the local authority verifier under the Scottish regulations. The mastic package follows the approved specification. Being in the west of Scotland, Lewiston gets more rain than eastern areas. External mastic needs dry spells, with internal work ready to fill the wet days.
Projects at schools like Glen Urquhart High School work to term dates, so mastic is programmed tightly. For a contractor at a hotel such as Benleva Hotel, which lies north-east of Lewiston, the mastic often has to be finished before a reopening date. With historic properties like Boleskine House, 4.4 miles south of Lewiston, in the area, refurbishment work often meets old masonry that needs compatible sealants.
Lewiston is about 13 miles south-west of Inverness, in Highland. We cover commercial sites throughout Lewiston, whether it’s a single job or part of a planned programme. Our Highland coverage takes in 256 places, large and small.
We take on facade joints across the IV63 postcode area, whatever the building. Among the streets we cover are Dal of Borlum, Carn Glas and Carriers Croft. We also cover Drumnadrochit (1 mile north), Torness (4 miles east), Gorthleck (6 miles south), Dores (7 miles north-east) and Kiltarlity (8 miles north) for facade joints. Bigger towns within reach include Inverness (13 miles north-east), Merkinch (14 miles north-east), Hilton (13 miles north-east), Crown (14 miles north-east), Millburn (14 miles north-east) and Muir of Ord (13 miles north). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you call the office on 01277 525 020 or email us.
Around Lewiston
Around Lewiston, our work takes us to commercial buildings near Drumnadrochit Hotel. Nearby you’ll also find Urquhart Castle (1.3 miles east) and Urquhart Castle Visitor Centre (1.2 miles east). For a walk, there’s Loch Ness.
From enquiry to sign-off
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed before the next one starts. Travel to smaller Scottish places like Lewiston is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- First we review photographs, drawings or what we saw on a visit, and agree how each joint will be reached.
- Failed sealant is cut out along its full length.
- Joint faces are cleaned to firm, sound material, with primer where the sealant maker specifies it.
- Backing rod, or bond-breaker tape in shallow joints, limits the depth.
- The new sealant goes in and is tooled firmly onto both faces.
- We walk the finished joints with you before handing over.
What we need from you
- Share your working hours and any access restrictions
- Point out parking and an unloading spot
- Flag any permit to work we’ll need
Get a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, give us a call on 01277 525 020 or email a schedule or drawings.
Advice
Different surfaces, different methods
Precast concrete panels
Concrete edges can be dusty or weak. Faces are cleaned to sound concrete, and damaged edges are reported first.
Perimeter joints at frames and structure
Perimeter joints at frames often show their age first. We cut them out, prepare both faces and reseal to the specification using a sealant classified for that use.
Nearby places to Lewiston
What else we do in Lewiston
Questions about Lewiston
Can the mastic package for our job in Lewiston follow the site programme?
Yes. Send the programme and drawings, and we’ll plan the mastic to suit the stages. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
What site paperwork comes with a job in Lewiston?
RAMS, insurance certificate, CSCS details: list what the site needs and we’ll confirm it with the quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
Does weather matter for sealant work?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
Can you work on upper floors?
That varies with the building and the access on offer. When you give us a call on 01277 525 020 or use the quote form, describe the access, and we will agree the approach together.
How long before the joints can be used?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.
Is the work guaranteed?
Yes, for 12 months. If our installation fails in that time, we return and fix it.
Can the building stay open while you work?
Typically, yes. Phased work can be planned so areas stay in use.
After the work
Problems stay small when the joints are checked regularly. In particular:
- Plan facade sealing alongside redecoration
- Don’t wait for a second leak before calling
- Check that rainwater leaves the facade the way it was designed to
- Check the asbestos register before old mastic is disturbed
Hold back any cleaning crew until the joints have had their stated cure time. Pressure washers and harsh cleaners can damage a fresh bead and tell your cleaning contractor.
Building facade joints into a maintenance cycle avoids emergency repairs. Inspect regularly and reseal sections as they start to fail instead of after the damage.
Commercial clients in Lewiston
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. Several sites can go on one quote, which keeps the paperwork simple.
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.