
Lewiston coloured sealant
Our CSCS-carded applicators take on coloured and colour-matched sealant for visible joints in Lewiston. Send photographs or drawings for a fixed quote.
- Old sealant that has yellowed, darkened or faded
- Untidy coloured beads with ragged edges
- Colour changes after a rebrand or refit
Need coloured sealant in Lewiston?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our coloured sealant in Lewiston
On a finished interior or a high-quality elevation, the sealant is part of the look. We install coloured and colour-matched sealant so joints sit quietly against cladding, stone, brick, frames and shop-fit finishes, for clients in Lewiston. The right product for the joint always comes first, then the colour. We work on natural stone and brick, cladding panels and hotel bathrooms and public areas, and what we are called in for most is sealant that no longer suits recoated frames and old colour-matched joints lifting at the edges. A specialist sealant contractor works differently from a general builder: in Lewiston, that means joint design, primers and backing rod as standard.
Around smaller places such as Lewiston, the commercial buildings tend to be hospitality, local shops, schools, health centres and converted rural buildings. Their kitchens, washrooms and window perimeters all need joints that keep water out.
Every job we finish is backed by a 12-month workmanship guarantee. If a joint we sealed fails because of how it was installed, we come back and put it right.

- Place
- Lewiston (IV63)
- Region
- Highland
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
What sets the cost
The price varies from site to site. Expect it to depend on:
- Any access equipment needed
- The total length or number of joints
- Backing rod, priming and other preparation
- Removal of failed or old sealant
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Sending details for a quote
We can often quote from photographs and a few details. Please tell us:
- Photos of the joints, close up and from further back
- Your programme or deadline
- Anything awkward about access or site hours
- The postcode of the building
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
Towns and villages near Lewiston
What else we do in Lewiston
For managing agents and facilities managers
CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
Main contractors use us as their sealant subcontractor. Programme, specification and site rules come first, with CSCS-carded applicators on site.
Common questions from Lewiston clients
Is Lewiston too far out for you?
No. Places such as Lewiston are covered as much as the big towns. We cover the whole of Scotland. We plan jobs in smaller places so return trips are kept to a minimum.
Can you match sealant colours for premises in Lewiston?
Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. The quote lists the colours the product is made in.
Can the building stay open while you work?
Normally, yes. Phased work can be planned so areas stay in use, with each area protected and signed.
Will you just go over the old sealant?
No. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.
What if there’s asbestos in the old mastic?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. If anything suspect turns up, we stop until it’s tested.
How long does a typical visit take?
That varies with the scale of the job, but the work normally takes a day for a modest shop fit, and longer for a full building or several floors. Larger or phased jobs take longer, and we will give you a timescale with the quote.
Do you work to architects’ specifications?
Yes. Send it with your enquiry, and the quote will be based on it.
Leave it or put it right?
A failed joint lets in water and dirt, whatever colour it is. Behind the bead, moisture can damage substrates and finishes, so resealing protects the finishes as well as the look. Renewing every failing joint on one visit is the sensible approach for a place like Lewiston. Photos of each area help us quote the whole job.
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
Why us?
- Fully insured, including public liability cover
- RAL and finish matching where the product range allows
- A range of standard colours, depending on the product
- CHAS accredited contractor
Take a look at how commercial sealant jobs are priced or our accreditations and insurance.
When something else is needed
Honesty saves time and money. New sealant won’t cure:
- Paintable products in joints they aren’t suited to
- Stopping sealant from ever changing colour outdoors
- Restoring stained stone or masonry next to old sealant
If you’re not sure, just give us a call on 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Powder-coated and anodised frames
- Natural stone and brick
- Hotel bathrooms and public areas
- Cladding panels
- Shop-fit joinery and counters
- Office fit-out finishes
Frontages, fit-outs and joints in Lewiston
Being in the west of Scotland, Lewiston gets more rain than eastern areas. External joints are sealed on dry days, with some flexibility in the dates. Weather-facing frames tend to need resealing before the sheltered ones There are several hotels within about 2 miles of Lewiston. Hotel refurbishments are where a matched sealant colour earns its place: bathroom, bar and reception joints have to sit with the finishes; work is planned so the hotel keeps trading.
Whatever the building in Lewiston, commercial sealant work starts with cutting out the failed bead and cleaning the joint back to sound material.
Lewiston is about 13 miles south-west of Inverness, in Highland. If you are looking for coloured sealant in Lewiston, we can help, as we do across Highland. Lewiston is one of 256 places we cover in Highland.
Postcode districts covered here: IV63 for colour-matched joints. Buildings on Dal of Borlum, Carn Glas and Carriers Croft are within our area. Close to Lewiston, our area also takes in Drumnadrochit (1 mile north), Torness (4 miles east), Gorthleck (6 miles south), Dores (7 miles north-east) and Kiltarlity (8 miles north). Nearby towns on our patch include Inverness (13 miles north-east), Merkinch (14 miles north-east), Hilton (13 miles north-east), Crown (14 miles north-east), Millburn (14 miles north-east) and Muir of Ord (13 miles north). Where a site is remote or on an island, travel and materials need planning ahead.
Near you in Lewiston
We work on buildings around Drumnadrochit Hotel. Other landmarks nearby include Urquhart Castle (1.3 miles east) and Urquhart Castle Visitor Centre (1.2 miles east). For a walk, there’s Loch Ness.
Our process
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. Tell us who will meet us and how to get in at your building near Lewiston. We’ll confirm the plan with the fixed quote.
- The sealant type is chosen for the joint first, then the colour.
- We compare your RAL reference or sample with the colours made for that sealant.
- A short trial length can be approved before the full run on visible work.
- We remove the existing bead, clean the faces and set the depth.
- The coloured sealant is applied and tooled with clean, masked edges.
Getting the site ready
- Clear stock, furniture or equipment away from the joints
- Flag any permit to work we’ll need
- Send your site hours and access windows
Request a quote
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. The easiest way is to ring 01277 525 020 or email drawings and photos.
Advice
When to call us in Lewiston
Internal joints can stain from cleaning products, spills or mould. Mould that has grown into sealant normally can’t be cleaned out.
Clients typically get in touch after noticing one or more of the following:
- Marked sealant in hotel bathrooms
- Old sealant that has yellowed, darkened or faded
- Joints that need to match a new RAL frame colour
- A run of joints in mismatched shades
In hotels such as Benleva Hotel, less than half a mile to the north-east of Lewiston, refurbishments normally mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes.
What your quote should include
- Whether primer will be used where the manufacturer specifies it
- Their plan for phasing and protecting the area
- Are they CHAS accredited or on Constructionline?
- Proof of insurance