Facade and window perimeter sealing in Hoswick, Shetland Islands
Commercial sealant work in Hoswick for contractors, FMs and building owners: facade joint and window perimeter sealing on commercial buildings, quoted at a fixed price.
- Old perimeter mastic that has dried out
- Facade joints cracked through the middle
- Damp patches beside frames after rain
Facade sealing in Hoswick
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
What happens if it’s left?
If access is already up for other work, resealing at the same time makes sense. Combine it with planned external works and you only arrange access once, saving a second set-up. Renewing every failing joint on one visit is the sensible approach for a place like Hoswick. Send photos and we will quote for everything together.
A quote for facade joints depends on how many there are, their condition and the access, and any specification that applies. Ask us for a fixed quote.
Why us?
- Over 20 years of commercial sealing
- Fixed quotes based on photos, drawings or a visit
- Products installed to the manufacturer’s instructions
- Failed material removed, not covered up
See how commercial sealant jobs are priced or our accreditations and insurance.
Facade sealing for commercial buildings in Hoswick
Some clients need every window on a block resealed; others need a few leaking frames sorted. The approach doesn’t change with the size: old sealant out, faces cleaned, depth set and a new bead tooled in. A 12-month guarantee applies to our workmanship. We work on stone and brick facade joints, window and door perimeters and shopfront frames, and the failures we’re asked to look at most are failed seals around shopfront and entrance frames and air leaks through failed facade joints. A specialist sealant contractor works differently from a general builder: on jobs in Hoswick, preparation and product choice get the time they need.
For a site around Hoswick, we plan the mastic in as few trips as the programme allows. Send drawings, photos and the programme so everything needed arrives on the first day.
A 12-month guarantee applies to all our work. If an installation problem shows up, give us a call on 01277 525 020 or email the details over and we’ll arrange a return visit.
- Place
- Hoswick (ZE2)
- Wider area
- Shetland Islands
- Cover
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Surface by surface
Render and coated surfaces
Paintable sealants exist for joints that will be coated. We confirm the product with you before starting.
Window and door perimeters
Frame-to-wall joints at windows and doors are the facade joints we reseal most. A low-modulus neutral-cure product, chosen for the frame and wall, goes in.
Your questions answered
Can being near the sea in Hoswick affect the sealant we need?
It can. Coastal exposure works external joints harder than inland weather. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Can the mastic package for our job in Hoswick follow the site programme?
Yes. The mastic is planned around your key stages. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Do you take on multi-site work?
Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.
Will rain stop the work?
Wet joints or temperatures outside the product’s range mean waiting. The programme allows for it and we tell you if the forecast changes things as the work goes on.
Does weather matter for sealant work?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
What’s the quickest route to a quote?
The quote form is the simplest route, though you can also call the office on 01277 525 020 or email a schedule or drawings. Photos, drawings or a joint schedule help us quote quickly.
Will you come and look before quoting?
It depends on the job. Straightforward work can often be priced from photos and measurements, and bigger or more complex jobs usually get a visit.
From enquiry to sign-off
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. Tell us who will meet us and how to get in at your building near Hoswick. We will confirm the plan with the fixed quote.
- Access, site rules and timing are settled with the client up front.
- Weather and temperature are checked against the product’s limits.
- We remove the old bead and check the edges are sound.
- Faces are cleaned, primed where needed and backed.
- Sealant is gunned in and tooled hard onto both faces.
- We hand over with our 12-month workmanship guarantee.
What we need from you
- Confirm the product named in the specification
- Tell staff and tenants when we will be in
- Point out parking and an unloading spot
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, speak to us on 01277 525 020 or use the quote form.
Read more
Do you need facade sealing in Hoswick?
The wrong product causes its share of trouble: an acetoxy cure can mark stone or corrode some metals, and interior products break down outdoors. Most external joints call for a neutral-cure, facade-grade sealant.
Clients typically get in touch after noticing something like this:
- Hard, chalky sealant that no longer flexes
- Weathered joints at frame-to-structure perimeters
- Sealant pulling away from frames or panels
- Air leaks through failed facade joints
Sites around Hoswick get mastic sealed to the drawings and the programme, nothing improvised.
What to look for in a quote
- How joint depth will be controlled
- Their public liability cover
- Will failed sealant be removed rather than covered?
- Which product they’ll use, and why it suits the joint
Nearby places to Hoswick
What else we do in Hoswick
Building and refurbishing in Hoswick
Hoswick lies within about 1 mile of the sea. Facades and window perimeters on coastal schemes take more wind-driven rain, and salt air nearer the shore, and the sealant, primer and backing need choosing with that in mind. Being on an island, Hoswick means planning around ferry times as well as the weather. With drawings and the programme in hand, the whole mastic package comes with us.
A facade joint near Hoswick lasts when width, depth and backing are right, not just the finish.
Hoswick is about 11 miles south of Lerwick, in the Shetland Islands. Any commercial site in Hoswick is covered, whether it’s a single job or part of a planned programme. Hoswick is one of 63 places we cover in the Shetland Islands for facade joints.
Business premises anywhere in ZE2 are within our area. Among the streets we cover are Greenfield Road and Brakefield Road, and sites on any of them can send details for a fixed quote. Close to Hoswick, our area also takes in Sandwick (1 mile east), Levenwick (2 miles south), Bigton (3 miles south-west), Mail (3 miles north) and Bremirehoull (3 miles north). Bigger towns within reach include Lerwick (11 miles north), Sound (11 miles north) and Scalloway (10 miles north). For island and remote sites, we plan travel and materials carefully, so include the location in your enquiry.
Landmarks near Hoswick
Not far away are Loch of Vatsetter.
Cost factors for facade joints
Before we quote, we look at:
- The size and state of each joint
- Quantities, in metres or numbers
- Location, for remote and island sites
- Phasing around occupants
Every site prices differently: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Sending details for a quote
A good diagnosis starts with the right details. Let us know:
- Any specification or named product
- Approximate linear metres or a joint schedule
- Where the site is, with the postcode
- When you need the work done
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, call 01277 525 020 or email drawings and photos.
Doing it in-house
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.