Facade and window perimeter sealing in Croy, Highland
Facade sealing for Croy, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Unsightly perimeter sealant on a visible elevation
- Facade joints cracked through the middle
- Gaps between rainscreen or cladding panels
Need facade sealing in Croy?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Common problems we fix in Croy
The wrong product causes its share of trouble: an acetoxy cure can mark stone or corrode some metals, and interior products break down outdoors. Neutral-cure, facade-grade products are what most external joints need.
Site and facilities staff are often the first to spot these:
- Water coming in around window frames
- New sealant peeling off old mastic
- Air leaks through failed facade joints
- Perimeter sealant that has split or peeled away
When a college such as Cantraybridge College (0.9 miles south of Croy) builds or refurbishes, the mastic package usually has to fit around students and staff.
What your quote should include
- How long is the guarantee, and what does it include?
- Will failed sealant be removed rather than covered?
- Their plan for phasing and protecting the area
- Are they CHAS accredited or on Constructionline?
About our facade sealing in Croy
A good facade joint depends on design as much as product. Joint width needs to match how far the joint moves and how far the sealant can stretch, while rod fixes the depth and stops the bead sticking to the rear with the ratio the sealant maker recommends, often around 2:1. If you have hard, chalky sealant that no longer flexes and weathered joints at frame-to-structure perimeters, we can put it right, whatever the surface. A specialist sealant contractor works differently from a general builder: on jobs in Croy, preparation and product choice get the time they need.
Construction around smaller Scottish places like Croy is often one-off schemes: a school, a health centre, a hotel extension or a few houses. The mastic still needs to suit exposed elevations and Scottish weather.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Where
- Croy (IV2)
- Wider area
- Highland
- Guarantee
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Quoting for work in Croy
What shapes the price:
- How much existing material needs removing
- Induction, permit and paperwork requirements
- Travel to remote or island sites
- Backing rod, priming and other preparation
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Before you send an enquiry
There’s no need for a formal survey. These details are enough to start:
- Specification clauses that apply
- Where the site is, with the postcode
- Asbestos survey details if the building is older
- Clear photos of the problem areas
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call 01277 525 020 or email the details over with what you know.
Building and refurbishing in Croy
Croy sits close to the coast, within about 3 miles. On a coastal site, facade and perimeter joints face driven rain and, closer to the beach, salt, and the sealant, primer and backing need choosing with that in mind. Being in the west of Scotland, Croy gets more rain than eastern areas. External mastic needs dry spells, with internal work ready to fill the wet days.
For contractors refurbishing units at places like Dalcross Industrial Estate (2.5 miles north-west of Croy), the mastic covers cladding panels, roller-door and window perimeters.
Croy is about 7 miles south-west of Nairn, in Highland. We send applicators to Croy for facade joints. Croy is one of 256 places we cover in Highland. Aberdeen is covered too, some 75 miles away.
Business premises anywhere in IV2 are within our area for facade joints. Streets here include Fraser Lane, MacKinnon Drive and Miller Road, and sites on any of them can send details for a fixed quote. Just outside Croy, we also work in Newlands of Culloden (3 miles south-west), Ardersier (3 miles north), Balloch (4 miles south-west), Viewhill (4 miles south-west) and Cawdor (4 miles east). A short drive away, we cover Inverness (9 miles south-west), Nairn (7 miles north-east), Cradlehall (5 miles south-west), Merkinch (9 miles west), Hilton (8 miles south-west) and Alness (15 miles north-west). For island and remote sites, travel and materials need planning ahead.
Around Croy
For rail, the closest station is Inverness Airport station, about 1.8 miles north-west of the centre. Well-known places in the area include Highland Aviation Museum (2.5 miles north-west) and Kilravock Castle (1.2 miles east). Not far away are Loch of the Clans.
Building owners, agents and FMs in Croy
We work for building owners and managing agents on everything from one building to a spread of sites around Croy. Several sites can go on one quote, so there’s one set of paperwork to deal with.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Croy can form part of a wider programme.
After the work
Problems stay small when the joints are checked regularly. In particular:
- Share access with other external trades
- Walk the elevations once or twice a year
- Report water ingress at frames as soon as it shows
- Clear debris that holds water against joints
If new signage, brackets or services are fixed through a sealed joint, the seal needs making good. Make sure the joint is resealed afterwards.
Get the joint design right when resealing: the right width, backing rod and a sealant with enough movement capability. Repeating a faulty detail just repeats the failure.
Questions we’re asked in Croy
Do you cover business parks and estates near Croy, such as Dalcross Industrial Estate?
Yes. We cover Croy and the area around it, including industrial estates, business parks and retail parks such as Dalcross Industrial Estate. Photos and a short description are enough for a first look.
Is a smaller place like Croy outside your area?
No. Small places get the same service as large ones. Our area covers all of Scotland, cities, towns and islands alike. We plan jobs in smaller places so return trips are kept to a minimum.
Can you send site paperwork?
Each site asks for different documents, so tell us what you need and we will confirm it when we quote.
What do you charge?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.
Will you quote for a small job?
We quote for single jobs as well as large packages and programmes. Photos and a description are enough to start.
Should we check old sealant for asbestos?
In older non-domestic buildings, old sealant can contain asbestos. The dutyholder’s asbestos register should be checked first; if it’s suspected, work stops until it has been tested. Removal of asbestos isn’t something we do.
From enquiry to sign-off
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. With the paperwork done, we take the joints in the sequence agreed with you, and each area is checked before we leave it. Jobs near Croy are often grouped with others in the same area. Let us know if your dates have any give.
- We start with photographs, drawings or a visit to see the joints and agree access.
- We confirm the joint type, movement and the specified product.
- Failed beads are removed in full and both faces cleaned back.
- Primer is applied where the maker specifies it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- We go over the completed work with you before leaving.
Getting the site ready
- Flag any permit to work we will need
- Tell us which areas need to stay in use
- Warn occupants and staff about the work
Get a fixed quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or ring 01277 525 020 or use the quote form to discuss it first.
Read more
Leave it or put it right?
Scaffold or access already on site makes resealing much simpler. Coordinating facade sealing with other external works avoids paying for access twice. Renewing every failing joint on one visit is the sensible approach for a place like Croy. Photos of each area help us quote the whole job.
There’s no price list, because the scope varies so much from one building to the next. Call for a quote and we’ll price your job on its own details.
Why clients in Croy choose us
- Products installed to the manufacturer’s instructions
- Commercial sealant work since 2005
- Colour agreed before work starts
- Work carried out by CSCS-carded applicators