Craighouse facade sealing
Our CSCS-carded applicators take on facade joint and window perimeter sealing on commercial buildings in Craighouse. Send photographs or drawings for a fixed quote.
- Discoloured or dirty facade joints
- Damp patches beside frames after rain
- Previous reseals run over old sealant
Need facade sealing in Craighouse?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Leave it or put it right?
Open facade joints also let air and dirt through: occupants notice draughts and cold spots around windows. Resealing deals with the draught as well as the leak. Renewing every failing joint on one visit is the sensible approach for a place like Craighouse. Photos of each area help us quote the whole job.
The specified product makes a difference, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Why us?
- Specification-led, product-correct work
- CHAS accredited contractor
- Clear, fixed quotes
- A Constructionline member, so easy to vet
See what affects the cost and our accreditations.
Facade sealing in Craighouse, done properly
We don’t install glazing systems or replace glass. What we seal are the joints around them: perimeter joints where frames meet the structure, panel joints and window perimeters with products suited to facade or glazing perimeter joints. We work on window and door perimeters, cladding panel joints and stone and brick facade joints, and what we’re called in for most is perimeter sealant that has split or peeled away and damp patches beside frames after rain. Searching for sealant specialists in Craighouse? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
For a site around Craighouse, we plan the mastic in as few trips as the programme allows. Send drawings, photos and the programme so everything needed arrives on the first day.
Whoever the client is, the cover is the same: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Location
- Craighouse (PA60)
- Region
- Argyll and Bute
- Guarantee
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
When it isn’t the sealant
Being straight saves everyone time. Fresh joints won’t solve:
- Joints too narrow for the movement they take, which need redesign
- Render or concrete edges that have broken away
- Work on the window or framing system itself
If in doubt, call 01277 525 020 or email drawings and photos and we will say what we think.
Where we work in Craighouse
- Shopfront frames
- Cladding panel joints
- Perimeter joints where frames meet the structure
- Window and door perimeters
- Coping and flashing joints
- Stone and brick facade joints
Site staff or a sealant specialist?
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Building and refurbishing in Craighouse
Craighouse is within about 1 mile of the coast. On a coastal site, facade and perimeter joints face driven rain and, closer to the beach, salt, and the sealant, primer and backing need choosing with that in mind. The west of Scotland, where Craighouse is, gets more rain than the east. External mastic needs dry spells, with internal work ready to fill the wet days.
Hotels like Jura Hotel (0.8 miles south of Craighouse) rarely close for long, so refurbishment mastic is phased floor by floor.
Craighouse is in Argyll and Bute. We send applicators to Craighouse for facade joints. Craighouse is one of 124 places we cover in Argyll and Bute. Sites around Glasgow have their own page, roughly 65 miles from Craighouse.
We take on facade joints across the PA60 postcode area, for business premises of every kind. Streets here include Croft Park and Otter Brae. Sites close to Craighouse are covered too, including Port Askaig (6 miles west), Keills (7 miles west), Bunnahabhain (7 miles west), Ardminish (14 miles south-east) and Bowmore (14 miles south-west). For island and remote sites, travel and materials need planning ahead.
Near you in Craighouse
For a walk, there’s Lochan Gleann Astaile and Glas Bheinn.
Do you need facade sealing in Craighouse?
Most facade joints fail through age and weathering. UV and weather harden the sealant until it can’t stretch with the building.
Typical triggers for a call:
- Facade joints cracked through the middle
- Patch repairs that keep failing
- Leaks at window and door perimeters
- Failed seals around shopfront and entrance frames
For contractors building in or near Craighouse, we seal to the drawings, the specification and the programme.
What your quote should include
- Who will actually carry out the work
- How the joint faces will be prepared and primed
- Health and safety accreditation such as CHAS
- What level of public liability insurance do they hold?
Places near Craighouse
Also in Craighouse
Maintenance after handover
Regular inspection catches problems early. Specifically:
- Report water ingress at frames as soon as it shows
- Record the product and colour used on each elevation
- Clear debris that holds water against joints
- Avoid harsh cleaners on facade sealant
Let the new sealant cure before washing the facade or windows near it. Keep high-pressure jets and strong chemicals away from new sealant and tell your cleaning contractor.
Don’t wait for a full elevation to fail. A few metres resealed promptly can stop water damage spreading.
Common questions from Craighouse clients
Can you keep pace with our programme in Craighouse?
Yes, we work to the programme and the sequence the site sets. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Is Craighouse off your patch?
Not at all: smaller places are covered as well as towns. Our area covers all of Scotland, cities, towns and islands alike. Where we can, we group nearby jobs to make the most of each trip.
Which sealant will you use?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Can you send site paperwork?
Each site asks for different documents, so tell us what you need and we will confirm it when we quote.
Is colour matching possible?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We’ll confirm the colours available for the specified product.
Do you hold CHAS accreditation?
Yes. We are CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
How is access to upper-level joints handled?
Access is planned with you before we quote. Tell us about access: existing scaffold, what you are arranging and any site restrictions, and the quote will reflect it.
From enquiry to sign-off
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. On site, the work normally takes longer on a full elevation than on a handful of window perimeters, and it always depends on dry weather, and we clear our waste as we work. For a building near Craighouse, directions, keys and a contact on the day are worth sorting early. We’ll confirm the plan with the fixed quote.
- First we review photographs, drawings or what we saw on a visit, and agree how each joint will be reached.
- Failed sealant is cut out along its full length.
- Both faces are cleaned and, where the product needs it, primed.
- Backing rod, or bond-breaker tape in shallow joints, limits the depth.
- A facade-grade sealant rated for the movement goes in, tooled to a concave profile.
- We walk the finished joints with you before handing over.
What we need from you
- Send your site hours and access windows
- Make sure the joints can be reached
- Send any specification or drawings in advance
Quotes
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, give us a call on 01277 525 020 or email us.