Expansion and movement joint sealing in Craighouse, Argyll and Bute
Our CSCS-carded applicators take on expansion and movement joint sealing in walls, decks and floors in Craighouse. Send photographs or drawings for a fixed quote.
- Layers of sealant in a movement joint
- Water dripping through deck or ramp joints
- Expansion joints filled with dirt and stones
Expansion joint sealing near Craighouse
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Questions about Craighouse
Must our site in Craighouse stop work while the joints are done?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. The phasing plan comes with the quote.
Can being near the sea in Craighouse affect the sealant we need?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We check the specified product suits the exposure and pay close attention to preparation.
Can a joint be sealed if the edges are broken?
Sound edges are essential. Where they’ve broken up, we’ll tell you they need repairing first so you are not paying for a bead that won’t hold.
What’s the difference between an expansion joint and a movement joint?
Movement joint is the broad term for any joint built in to let a structure move. On site, people tend to use them interchangeably and the way they’re sealed is similar.
Do you need to see the site first?
It depends on the job. Simple work can often be priced from photos, while larger or less clear jobs get a site visit first.
What’s the quickest route to a quote?
It works in four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photographs and a postcode.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
How we handle expansion joint sealing in Craighouse
We cover the full range of movement joints: brickwork and blockwork joints, precast and cladding panel joints, concrete joints, car park decks and ramps, podiums and floor movement joints. The product depends on the movement, the weather and anything that runs over it. If you are dealing with movement joints with split or torn sealant and car park joints leaking onto vehicles below, we can put it right. A specialist sealant contractor works differently from a general builder: in Craighouse, that means joint design, primers and backing rod as standard.
Travel to smaller places like Craighouse is planned so the work is done in one trip where possible. Photos, approximate widths and what uses the floor help us bring the right materials.
A 12-month guarantee applies to all our work. If an installation problem shows up, call 01277 525 020 or email drawings and photos and we’ll arrange a return visit.
- Place
- Craighouse (PA60)
- Wider area
- Argyll and Bute
- Cover
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Also near Craighouse
More services for Craighouse
Joints that move: notes for Craighouse
Craighouse lies within about 1 mile of the sea. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, so it pays to keep them sealed. The west of Scotland, where Craighouse is, gets more rain than the east. Open joints in external slabs take a lot of water. Dry spells are used for the external joints.
Around Craighouse, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Craighouse is in Argyll and Bute. We cover Craighouse, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 124 places in Argyll and Bute. Our Glasgow page has more on work in that area, about 65 miles away.
Postcode districts covered here: PA60 for movement joints. For a building on Croft Park and Otter Brae or nearby, we can quote for movement joints. We also cover Port Askaig (6 miles west), Keills (7 miles west), Bunnahabhain (7 miles west), Ardminish (14 miles south-east) and Bowmore (14 miles south-west) for movement joints. Where a site is remote or on an island, we plan travel and materials carefully, so include the location in your enquiry.
What’s near Craighouse
Not far away are Lochan Gleann Astaile and Glas Bheinn.
Our process
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself typically takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing, and our waste is bagged and taken away as we go. Tell us who will meet us and how to get in at your building near Craighouse. We’ll confirm the plan with the fixed quote.
- We start with photographs, approximate lengths and any drawings, visiting where needed.
- We compare each joint’s width with the movement and the sealant’s capability.
- Every joint is cleared of the failed seal and any grit packed into it.
- Edges are checked, and we tell you if any need repairing before sealing.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Each area is handed back after its cure time, under our 12-month guarantee.
Before we start on site
- Send any specification or drawings in advance
- Point out any areas we must not close
- Make sure the joints can be reached
Ask for a quote
For a fixed quote, speak to us on 01277 525 020 or send photos by email. You can also send details through our quote form.
Related advice
What we are called out for in Craighouse
Car park decks and floors face loads that walls never see. Tyres and wheels press on the edges and the sealant, while de-icing salts and grit attack the seal. A sealant that isn’t trafficable won’t last there.
Things that normally lead to an enquiry:
- Expansion joints filled with dirt and stones
- New sealant over old, now failing
- Brittle, chalky sealant on external joints
- Sealant peeling off one face of the joint
Around Craighouse, open joints collect water and debris, and the arrises are the next to go; we will tell you if the edges need repairing first.
What to look for in a quote
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- How long is the guarantee, and what does it include?
- How they’ll work around occupants
- Whether primer will be used where the manufacturer specifies it
Building owners, agents and FMs in Craighouse
If you look after buildings for someone else, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
When to bring in a specialist
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Looking after the joints
Your facilities or cleaning team can help the joints last. Share these points with them:
- Act on the first tear or lifting edge rather than waiting
- Look over external and deck joints after a hard winter
- Include every elevation and deck joint in periodic inspections
- Keep product details with the building records for the next reseal
Every joint we seal is backed by a 12-month guarantee on workmanship. Record which product went into which joints in the building file.
Joints sealed at the same time generally fail around the same time. Inspecting the whole run is worth the effort, so the work can be planned rather than rushed. We’ll tell you which movement joints need doing now and which can wait.
What the job involves on each surface
Internal floor movement joints
Forklift and pallet-truck wheels break unsupported joint edges. We match the product to the traffic and the movement flagging broken arrises before sealing.
Cladding panel joints
We confirm what access is in place before pricing. Photos taken near the joints help us price accurately.