Facade Sealing contractors in Bray Wick
Work needed on a facade joint in Bray Wick? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Cladding panel joints that have opened up
- Damp patches beside frames after rain
- New sealant peeling off old mastic
Facade sealing across Bray Wick
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Why it’s worth doing now in Bray Wick
Open facade joints also let air and dirt through: draughts around frames add to heating costs and complaints. Resealing deals with the draught as well as the leak. One visit to deal with every failing joint makes more sense than several trips to a place like Bray Wick, rather than one at a time. Send photographs of each area and we’ll quote for the lot.
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote.
Why clients in Bray Wick choose us
- Matching to RAL references, product permitting
- 12-month guarantee on workmanship
- Old sealant cut out, never sealed over
- Constructionline member for supplier checks
Take a look at our cost guide or our accreditations and insurance.
How we handle facade sealing in Bray Wick
We are often asked to look at water coming in around frames. Very often the perimeter bead has cracked or lost its grip, but not always. If the evidence points away from the sealant, we say so before quoting. If you are dealing with leaks at window and door perimeters and failed sealant on precast panel joints, we can help, whatever the surface. Searching for sealant specialists in Bray Wick? We have been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
Around smaller places like Bray Wick, building work normally means conversions of farm buildings, a few new houses or an extension to a hall or school. Perimeters, facade joints and internal sealant all need doing properly, however small the scheme.
Every job is signed off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Location
- Bray Wick (SL6)
- Wider area
- Windsor and Maidenhead
- Guarantee
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
How the quote is worked out
These are the things that shape the price:
- How much existing material needs removing
- The site’s rules and procedures
- How much there is to seal
- Location, for remote and island sites
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
What to include in your enquiry
To price the job accurately, we need a clear picture of the site. Send us:
- Where the site is, with the postcode
- Clear photographs of the problem areas
- Any dates the work must fit around
- Specification clauses that apply
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call 01277 525 020 or email a schedule or drawings with what you know.
Bray Wick: questions and answers
Do you cover business parks and estates near Bray Wick, such as Priors Way Industrial Estate?
Yes, sites like Priors Way Industrial Estate are within our area, along with the rest of Bray Wick. Photos and a short description are enough for a first look.
Is Bray Wick off your patch?
Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
Can weather delay the job?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.
When can you be on site?
Mention the site’s hours and access windows in your enquiry, and we’ll plan around them. Our office runs Monday to Friday, 8am until 5pm.
Is any job too small?
We quote for single jobs as well as large packages and programmes. Photos and a description are enough to start.
Can you just add new sealant on top?
No. Fresh silicone won’t grip cured silicone, so the existing bead is removed entirely and the faces are cleaned before resealing. Nothing else gives a bond that lasts.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.
Diagnose, treat, sign off
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. With the paperwork done, we take the joints in the sequence agreed with you. For a building around Bray Wick, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.
- We look at the joints, the drawings and the access before pricing.
- Failed sealant is cut out along its full length.
- Joint faces are cleaned to firm, sound material, with primer where the sealant maker specifies it.
- Closed-cell rod fixes the depth, and the sealant grips two sides only.
- The new sealant goes in and is tooled firmly onto both faces.
- We walk the finished joints with you before handing over.
Before we start on site
- Clear stock, furniture or equipment away from the joints
- Point out parking and an unloading spot
- Share the asbestos register for older buildings
Ask for a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. For smaller jobs, photographs and a description will do.
Advice
Work for main contractors and building owners
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so the building keeps working while we do.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Nearby places to Bray Wick
What else we do in Bray Wick
New build and refits around Bray Wick
Bray Wick is in the South East, one of the UK’s drier regions. Still, external mastic needs dry faces within the maker’s temperature limits, which isn’t every day, so we time external mastic for dry faces and agree it with the site team. The area within 2 miles of Bray Wick holds plenty of hotels. Hotel extensions and refits typically have to fit around bookings, so mastic dates are tight.
Hospital estates such as St Mark's Hospital, 2.3 miles to the north-west of Bray Wick, tend to grow and change in phases, often next to occupied wards, so facade and perimeter sealing has to fit the estates team’s plan. School extensions, at buildings such as Holyport CofE Primary School, typically run to the summer holidays, mastic included. When units on a site such as Priors Way Industrial Estate (under half a mile west of Bray Wick) are refurbished or reclad, the panel joints and window perimeters are part of the mastic package.
Bray Wick is about 2 miles south-east of Maidenhead, in Windsor and Maidenhead. We cover Bray Wick, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Bray Wick is one of 60 places we cover in Windsor and Maidenhead for facade joints. We also cover Reading, around 12 miles from Bray Wick.
Business premises anywhere in SL6 are within our area. Among the streets we cover are Windsor Road, Holyport Road and Upper Bray Road. Being close to the M4, Bray Wick is easy to get to with materials and equipment. Close to Bray Wick, our area also takes in Boyn Hill (1 mile north-west), Cox Green (1 mile west), Maidenhead (2 miles north-west), Furze Platt (3 miles north-west) and Woolley Green (3 miles west). Further afield, our area takes in Windsor (4 miles south-east), Cookham (4 miles north), Dedworth (3 miles south-east), Broomhall (8 miles south-east), South Ascot (7 miles south) and Datchet (6 miles east).
What’s near Bray Wick
In Bray Wick, that means premises near Desborough College, The Belgian Arms and Braywick Park. For rail, the closest station is Maidenhead station, roughly 1.4 miles north-west. Other landmarks nearby include St Mark's Hospital (2.3 miles north-west) and Windsor Castle (4.7 miles east). For a walk, there’s Taplow Lake and Weycock Hill.
Should maintenance staff do it?
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
When it isn’t the sealant
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Work on the window or framing system itself
- Arranging specialist high-level access, which is planned with the client
- Cracked or spalling substrates that need repair before sealing
If you’re not sure, just phone 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer before you book.
Surfaces we seal
- Cladding panel joints
- Stone and brick facade joints
- Coping and flashing joints
- Window and door perimeters
- Shopfront frames
- Perimeter joints where frames meet the structure