Fire stopping in Bray Wick
Fire-rated and intumescent sealing of service penetrations and linear gaps across Bray Wick, by CSCS-carded applicators. CHAS accredited and fully insured.
- Builders’ foam or ordinary silicone in compartment walls
- Hidden openings found during inspections
- Open linear gaps along the top of fire-resisting walls
Fire stopping near Bray Wick
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in Bray Wick
Facilities managers in Bray Wick often find open service penetrations when ceilings come down for other work. If a specification already covers those walls and floors, we can reseal to it. With no specification in place, the first step sits with your designer or fire engineer, not with us. If you’re dealing with openings found when ceilings come down for a refit and service penetrations left open after M&E works, we can put it right. Whether you call it commercial sealant work, mastic application or joint sealing, in Bray Wick it comes down to the same thing: the right product in a properly prepared joint.
Barn and farm-building conversions near places like Bray Wick often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Every job is signed off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Location
- Bray Wick (SL6)
- Wider area
- Windsor and Maidenhead
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Owners, agents and contractors
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Questions we’re asked in Bray Wick
Will you take on work at estates like Priors Way Industrial Estate, close to Bray Wick?
Yes, sites like Priors Way Industrial Estate are within our area, along with the rest of Bray Wick. Send details of the unit and the work through our quote form for a quick quote.
Is a smaller place like Bray Wick outside your area?
Not at all: smaller places are covered as well as towns. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.
Will you come and look before quoting?
It depends on the job. Straightforward work can often be priced from photographs and measurements, and bigger or more complex jobs usually get a visit.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
Can weather delay the job?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to.
Are you members of a third-party fire-stopping installer scheme?
No, and we won’t imply otherwise. Some clients require third-party installer schemes even though the law doesn’t. Where it isn’t required, we install the specified sealant to the maker’s details.
What sealant work can’t fix
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Walls or floors that aren’t fire-resisting to begin with
- Reviewing a building’s overall fire safety
- Openings that need collars, wraps, batts or boards rather than sealant
If in doubt, ring 01277 525 020 or send photos by email and we’ll say what we think before you book.
Where we work in Bray Wick
- Service gaps in risers
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Cable penetrations
From enquiry to sign-off
When we get to site, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, and the work usually takes anything from one day to a planned run of visits, depending on the number of seals and the access. For work around Bray Wick, we aim to finish in one visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- First we go through the drawings, schedule or specification for the seals and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Getting the site ready
- Warn occupants and staff about the work
- Tell us what induction or permit system the site runs
- Send your site hours and access windows
Getting a fixed quote
To get a fixed quote, give us a call on 01277 525 020 or use the quote form, telling us the site location and the nature of the job. Our quote form is another easy route.
Read more
Leave it or put it right?
Inspections and handover checks often pick up fire stopping. Finding unsealed or improvised openings late can hold up a programme. One visit to deal with every failing joint makes more sense than several trips to a place like Bray Wick. Photos of every joint help us quote for the whole job.
What a job costs comes down to the quantity of joints, what has to come out first and the access. Call for a quote when you are ready.
Why choose Mastic Doctor in Bray Wick
- Fully insured, including public liability cover
- Over 20 years of commercial sealing
- Joints cleaned back to sound surfaces
- Workmanship guaranteed for 12 months
Read what affects the cost or our accreditations.
Signs you need fire stopping in Bray Wick
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is when untested combinations creep in and later need putting right.
Things that normally lead to an enquiry:
- Seals disturbed by maintenance and left open
- Openings left by services added after handover
- Unsealed joints where partitions meet the slab
- Fire-rated sealant that has cracked or shrunk back
For a hotel such as Chauntry House Hotel, 0.7 miles north-east of Bray Wick, penetration seals are worth checking after any refit or services upgrade.
What your quote should include
- The named product and why it was chosen
- Will failed sealant be removed rather than covered?
- How they handle RAMS and site documents
- How long is the guarantee, and what does it include?
Service penetrations in Bray Wick buildings
The area within 2 miles of Bray Wick holds plenty of hotels. In hotels, bedroom and corridor walls are usually fire-resisting, so services added in a refit need sealing with the specified product. Approved Document B is the English guidance that covers fire stopping around openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
For a hospital such as St Mark's Hospital, which lies north-west of Bray Wick, penetration sealing is typically phased ward by ward, with infection-control rules agreed first. For a unit at a site such as Priors Way Industrial Estate, under half a mile west of Bray Wick, new power or data runs between office and warehouse can breach a compartment wall.
Bray Wick is about 2 miles south-east of Maidenhead, in Windsor and Maidenhead. Businesses, contractors and managing agents in Bray Wick can call on us for service penetrations, as part of our coverage of Windsor and Maidenhead. We work across 60 places in Windsor and Maidenhead. Our Reading page has more on work in that area (12 miles or so).
We take on service penetrations across the SL6 postcode area, whatever the building. We cover commercial and managed buildings on Windsor Road, Holyport Road and Upper Bray Road and the roads nearby. Access to Bray Wick is via the M4, so getting applicators and materials to site is simple. We also cover Boyn Hill (1 mile north-west), Cox Green (1 mile west), Maidenhead (2 miles north-west), Furze Platt (3 miles north-west) and Woolley Green (3 miles west). Nearby towns on our patch include Windsor (4 miles south-east), Cookham (4 miles north), Dedworth (3 miles south-east), Broomhall (8 miles south-east), South Ascot (7 miles south) and Datchet (6 miles east).
Near you in Bray Wick
Recent enquiries here include premises near Desborough College, The Belgian Arms and Braywick Park, among other places. The nearest railway station is Maidenhead station, roughly 1.4 miles north-west of the centre. Nearby you will also find St Mark's Hospital (2.3 miles north-west) and Windsor Castle (4.7 miles east). Green spaces nearby include Taplow Lake and Weycock Hill.
Nearby places to Bray Wick
More services for Bray Wick
How the job changes by surface
Masonry and concrete
Block walls and concrete floors are common substrates for penetration seals. Dust and debris are cleared from the opening, with backing added if the detail requires it.
Metal pipes
Sealant details often cover copper and steel pipework. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on.