Brattle facade sealing
Planning work on a facade joint in Brattle? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Cladding panel joints that have opened up
- Unsightly perimeter sealant on a visible elevation
- Previous reseals run over old sealant
Facade sealing across Brattle
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Quoting for work in Brattle
These are the things that shape the price:
- How much there is to seal
- Phasing around occupants
- Site requirements such as inductions and permits
- How much existing material needs removing
There’s no price list, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
Sending details for a quote
It doesn’t need to be a full survey. These details are enough to start:
- Rough lengths or quantities, or drawings if you have them
- The type of building and who uses it
- Asbestos survey details if the building is older
- Photos of the joints, close up and from further back
To get a fixed quote, speak to us on 01277 525 020 or email us, telling us the site location and the nature of the job. You can also send details through our quote form.
Facade sealing in Brattle, done properly
Facade joints are the line of defence between the weather and the building fabric. When a perimeter bead splits or peels, water finds its way behind frames and into the structure. We remove failed sealant and install a new bead chosen for the joint and how far it moves. We work on perimeter joints where frames meet the structure, shopfront frames and cladding panel joints, and what we are called in for most is weathered facade joints that have lost their grip and new sealant peeling off old mastic. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Brattle, preparation and product choice get the time they need.
In the countryside around places like Brattle, conversion schemes put new frames into old stone, flint, brick or timber. Those joints need a sealant that suits an uneven, sometimes porous surface, and often a colour chosen for the building.
Building owners and contractors get the same cover: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Brattle (TN26)
- Wider area
- Kent
- Guarantee
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Facades, frames and programmes in Brattle
Brattle sits in one of the drier corners of the country, the South East. Even so, frost and condensation on steel and glass are common on winter mornings, so the external programme keeps a little slack. Brattle lies roughly 48 miles out from central London. Commuter-belt towns tend to see a steady flow of new flats, offices and commercial schemes, and each scheme needs its mastic sealed to programme.
When a school such as Woodchurch Church of England Primary School is extended or refurbished, the mastic package is often squeezed into the holidays. Older buildings in the area around Brattle, such as Smallhythe Place, which lies south-west of Brattle, need care when sealed: the product has to suit soft or historic materials.
Brattle is about 6 miles south-west of Ashford, in Kent. Commercial clients in Brattle can call on us for facade joints, as part of our coverage of Kent. 931 places across Kent fall within our area, including Brattle. Sites around Brighton have their own page, roughly 43 miles from Brattle.
We take on facade joints across the TN26 postcode area, whatever the building. Streets here include Front Road, Lower Road and Appledore Road. If your building is just outside Brattle, we cover Woodchurch (1 mile north), Brook Street (1 mile west), Shirkoak (1 mile north), Appledore Heath (2 miles south) and Reading Street (3 miles south-west). Nearby towns on our patch include Ashford (6 miles north-east), Hythe (13 miles east), Tenterden (4 miles west), Park Wood (15 miles north-west), Kennington (8 miles north-east) and New Romney (9 miles south-east).
Landmarks near Brattle
Locally, jobs take us to sites close to Stonebridge Inn. The nearest railway station is Appledore (Kent) station, about 3.1 miles south-east. A little further out are Woodchurch Village Life Museum (1 mile north-west). Not far away are Orlestone Forest.
Why act early in Brattle
Leaving failed perimeter sealant also makes the eventual job bigger: wet edges break down, so repairs may be needed before resealing. Early action keeps it simple. One visit to deal with every failing joint makes more sense than several trips to a place like Brattle, rather than one at a time. Send photos of each area and we’ll quote for the lot.
What a job costs comes down to the quantity of joints, how much old material needs removing and how the joints are reached. Call for a fixed quote when you are ready.
Why appoint us
- Coloured sealants to suit the setting, where available
- RAL and finish matching where the product range allows
- A Constructionline member, so easy to vet
- A fixed quote before work starts
Take a look at what affects the cost or how we’re accredited.
For managing agents and facilities managers
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Diagnose, treat, sign off
Where the site stays busy, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed, then reopened once the sealant allows before we move to the next. Jobs in and around smaller places like Brattle are usually planned as a single visit, so photographs and measurements up front really help. That way the right products come on the day.
- Access, site rules and timing are settled with the client up front.
- Weather and temperature are checked against the product’s limits.
- Each joint is cut out and the edges inspected.
- Joints are cleaned, primed if required and fitted with backing rod.
- Sealant is gunned in and tooled hard onto both faces.
- We hand over with our 12-month workmanship guarantee.
Getting the site ready
- Tell us which areas need to stay in use
- Make sure the joints can be reached
- Confirm the product named in the specification
Ask for a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to ring 01277 525 020 or email the details over with what you know.
Read more
Looking after the joints
Once the work is signed off, a little attention goes a long way:
- Never let anyone seal over old sealant
- Combine resealing with other works that need access
- Check that rainwater leaves the facade the way it was designed to
- Don’t wait for a second leak before calling
If new signage, brackets or services are fixed through a sealed joint, the seal needs making good. Make sure the joint is resealed afterwards using a matching sealant.
Planned resealing is cheaper than reacting to leaks. Inspect regularly and reseal sections as they start to fail.
When something else is needed
Before quoting, we check that sealant is the right answer. It won’t put right:
- Joints too narrow for the movement they take, which need redesign
- Cracked or spalling substrates that need repair before sealing
- Water getting in through cracked render or porous masonry
Not sure which it is? You can give us a call on 01277 525 020 or send photos by email and we will tell you honestly before you book.
What we seal
- Stone and brick facade joints
- Cladding panel joints
- Shopfront frames
- Window and door perimeters
- Perimeter joints where frames meet the structure
- Coping and flashing joints
Other services in Brattle
Your questions answered
What site paperwork comes with a job in Brattle?
We will confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. Our applicators are CSCS-carded, and we carry £5m public liability insurance.
Is a smaller place like Brattle outside your area?
Not at all. Brattle is within our area. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Do you need to see the site first?
Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we’ll arrange a visit before quoting.
Can you work while the building is occupied?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
When can the area be used after sealing?
Curing time varies by product, and we confirm it on the day.
Do you offer coloured sealant?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We’ll confirm the colours available for the specified product.
Is it okay to overlay old mastic?
No. Fresh silicone won’t grip cured silicone, so the existing bead is removed entirely. That is what makes the new joint last.