Altens facade sealing
Facade joint and window perimeter sealing on commercial buildings in Altens. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Failed sealant on precast panel joints
- Failed seals around shopfront and entrance frames
- Old perimeter mastic that has dried out
Facade sealing in Altens
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
When to bring in a specialist
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Facade sealing in Altens, done properly
Every facade quote starts with how the joints will be reached. Let us know what access exists or is planned, and any site rules we need to work around, so the price covers the real job. If you’re dealing with perimeter sealant that has split or peeled away and water coming in around window frames, we can put it right, on shopfront frames, cladding panel joints and window and door perimeters alike. A single leaking joint is often how a building in Altens first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Construction in Scotland’s cities is a mix of new build and work to existing stone buildings. Work comes under Scotland’s own building standards, and our job is to seal to the specification.
Every job we finish is backed by a 12-month workmanship guarantee. If our installation lets you down in that time, we return and fix it.
- Location
- Altens (AB12, AB99, AB10)
- Region
- Aberdeen
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Also in Altens
What we’re called out for in Altens
When the sealant tears down its centre, it has typically been asked to move more than it can. The joint may be too narrow, the bead too thin or the sealant the wrong movement class.
Site and facilities staff are often the first to spot these:
- Draughts around frames and panels
- Hard, chalky sealant that no longer flexes
- Previous reseals run over old sealant
- Discoloured or dirty facade joints
Building work at universities like Robert Gordon University (2.2 miles west of Altens) is often timed for the summer, mastic included.
What to look for in a quote
- Will CSCS-carded applicators be on site?
- How long is the guarantee, and what does it include?
- What level of public liability insurance do they hold?
- The named product and why it was chosen
How a job runs
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. In a Scottish city, kerbside space and loading need planning, especially near the centre. Tenement closes, shared stairs and factor approvals may also be involved.
- Photos, drawings or a visit tell us about the joints and the access.
- We confirm the joint type, movement and the specified product.
- Failed beads are removed in full and the joint faces cleaned.
- Primer is applied where the maker specifies it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
Getting the site ready
- Flag any permit to work we’ll need
- Explain the parking and delivery arrangements
- Send any specification or drawings in advance
Request a quote
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. For a chat about it beforehand, give us a call on 01277 525 020 or email the details over.
Read more
Work for main contractors and building owners
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
New build and refits around Altens
Altens sits close to the coast, within about 1 mile. Facades and window perimeters on coastal schemes take more wind-driven rain, and salt air nearer the shore, so we check the specified product suits the exposure before the first bead. Building work in Altens comes under the Building (Scotland) Regulations 2004 and their technical handbooks, with warrants from the local authority verifier. Our job is to seal to that specification.
When a school such as Lochside Academy is extended or refurbished, the mastic package is often squeezed into the holidays. New wings at hospitals like Albyn Hospital, 2.4 miles to the north-west of Altens, bring long runs of window and panel joints to seal.
Altens is about 2 miles south-east of Ferryhill, in Aberdeen. We cover commercial sites throughout Altens, whether it’s a single job or part of a planned programme. Altens is one of 40 places in Aberdeen on our list.
Anyone looking for facade sealing in AB12, AB99 and AB10 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on Minto Road, Redmoss Road and Minto Avenue or close by, send details and we’ll quote for facade joints. If your building is just outside Altens, we cover Cove Bay (1 mile south), Tullos (1 mile north), Balnagask (2 miles north), Torry (2 miles north) and Footdee (2 miles north). Further afield, our area takes in Aberdeen (3 miles north-west), Rosemount (3 miles north-west), Berryden (3 miles north), Dyce (7 miles north-west), Tillydrone (4 miles north) and Queen's Cross (3 miles north-west).
Local landmarks in Altens
Recent enquiries here include premises near Harlaw Academy and Duthie Park. The closest station to Altens is Aberdeen station, roughly 2.1 miles north of the centre. Well-known places in the area include Aberdeen Trades Hospitals (2.4 miles north) and Union Square Aberdeen (2.1 miles north). Not far away are Portlethen Moss and Loirston Loch.
Altens: questions and answers
Will you plan work around the academic year at somewhere like Robert Gordon University?
Yes. Education sites typically want the work in vacations or in phases during term, and we plan to suit. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Can you take on a job at a hospital such as Albyn Hospital?
Yes. Healthcare sites are among the places we work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
Should we check old sealant for asbestos?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Check the asbestos register or survey before it is disturbed. Removal of asbestos isn’t something we do.
What site paperwork can you supply?
Each site asks for different documents, so tell us what you need and we’ll confirm it when we quote.
Do you install glazing systems?
No. A glazing contractor handles that. We reseal window perimeters, panel joints and frame-to-structure perimeters.
Does the weather affect the work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Leave it or put it right?
Patch repairs over old sealant tend to come back. A full cut-out and reseal costs more on the day but lasts much longer. In a Scottish city, access often needs scaffold, permits or factor approval, so deal with all failing joints while access is up.
There’s no price list, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
Why clients in Altens choose us
- Failed material removed, not covered up
- Clear, fixed quotes
- CSCS-carded applicators
- Health and safety: CHAS accredited
Take a look at what affects the cost and our accreditations.
What we can’t put right
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Leaks from roofs, gutters or failed flashings rather than sealant joints
- Work on the window or framing system itself
- Arranging specialist high-level access, which is planned with the client
If you’re not sure, just ring 01277 525 020 or use the quote form and we will give you a straight answer before you book.
Joints and surfaces we work on
- Coping and flashing joints
- Cladding panel joints
- Stone and brick facade joints
- Window and door perimeters
- Perimeter joints where frames meet the structure
- Shopfront frames