Hampshire · England
Commercial sealant contractors in SO23
Sealant work for contractors, FMs and building owners across SO23, from Hyde, Highcliffe and Springvale, with a fixed quote before we start.
Sealant work in SO23
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Where we work in SO23
- Hyde
- Highcliffe
- Springvale
- Abbotts Barton
- Winnall
- Bar End
- Headbourne Worthy
- Kings Worthy
- Winchester
- Weeke
- Stanmore
- Badger Farm
- St Cross
Services in SO23
- Expansion and movement joint sealing
- Industrial and floor joint sealing
- Mastic sealing for building owners and managing agents
- Facade and window perimeter sealing
- Fire-rated sealing and fire stopping
- Coloured and colour-matched sealant
- Commercial sealant contractors
- Construction and new-build mastic
- Commercial washroom and wet-area sealing
- All services
Tell us what needs doing and your postcode and we’ll come back with a price: phone 01277 525 020 or email us.
Postcodes nearby
More in Hampshire
All places in Hampshire
All areas
Commercial sealant contractors in SO23: how it works
Failed sealant isn’t always the whole story. A leak near a frame edge can start in the frame, the cill or the cavity. We look before we quote and tell you plainly if sealant won’t solve it, so nobody pays for a reseal that can’t hold. We work on window and door perimeters, movement joints in walls and floors and floor and threshold joints, and the failures we’re asked to look at most are untidy joints in a reception, shop floor or lobby and a top-up bead over failed sealant, now lifting.
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish.
- Site photographs, drawings or a visit tell us what’s there and how it has failed.
- You get a fixed quote covering removal, preparation and the new sealant.
- We agree the order of work, access windows and site hours with you.
- The failed sealant comes out and the faces are prepared, with primer where required.
- Depth is set with backing, then the sealant is applied, tooled and the area tidied.
- Completed areas are signed off with you under our 12-month guarantee.
What affects the price in SO23
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Why choose Mastic Doctor
- A fixed quote before work starts
- Colour agreed before work starts
- Sealing commercial buildings since 2005
- Specification-led, product-correct work
Getting a fixed quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to ring 01277 525 020 or email drawings and photos.
Landmarks near Hyde
We work on buildings around St Bede Church of England Primary School, Peter Symonds College and Leigh House Hospital, among other places. Other local landmarks include St Bartholomew's Church (less than half a mile south-west), The King Alfred pub (less than half a mile south-east) and St. Cross Park (1.7 miles south). There’s a railway station in Hyde itself: Winchester station. Nearby you’ll also find Winchester Castle (0.6 miles south-west) and Royal Observer Corps Museum (0.5 miles north). Green spaces nearby include Winnall Moors and Twyford Down.
Commercial sealant contractors across SO23: the area picture
Shop fits, office refurbishments and hotel refits in towns such as Winchester, Hyde and Weeke all leave joints that need sealing. Where the joint is on show, a colour that suits the finish is part of the job.
London and the South East are among the drier parts of the UK, though outside work in SO23 still waits for dry faces, and cold mornings bring frost and condensation on steel and glass.
Hyde: For premises near Winchester station (less than half a mile south-west of Hyde), footfall is part of the plan: work is phased so shops and offices keep trading. For a hotel such as The Winchester Hotel and Spa, which lies west of Hyde, the colour of a joint at the bar or the bath matters to the look of the room.
For managing agents and facilities managers
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
Whether you are a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Keeping the joints sound
After handover, a little attention goes a long way:
- Make sure contractors see the asbestos survey before cutting out old mastic
- Act on the first lifting edges rather than waiting
- Brief cleaning contractors to avoid scourers and blades on sealant
- Keep barriers up until the new sealant has cured
Keep an eye out for other trades after we have gone. When fittings are moved or cabling added, the sealant nearby is easily disturbed, and it’s easy to forget to reseal afterwards. Where work has disturbed a joint, just ring 01277 525 020 or email us for a quote.
Sealant rarely fails all at once across a building. The first failures are often a warning about the rest, so it makes sense to look at the wider elevation or block. We can assess the lot and suggest what to do now and later.
Why deal with it now?
Some managers wait for a fit-out before touching the mastic. That’s reasonable for internal joints that are just tired-looking, but external and wet-area joints that already leak shouldn’t wait. Splitting the scope into now and later is often the sensible compromise.
Questions to ask before you book
- How the joint faces will be prepared and primed
- What level of public liability insurance do they hold?
- Will failed sealant be removed rather than covered?
- What site paperwork they can supply
What affects the price in SO23
Sealant work doesn’t have a standard rate, since sites vary so much. What we take into account:
- How much there is to seal
- Working within restricted access windows
- Which sealant the job calls for
- How accessible the joints are
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote and we’ll explain how it’s made up.
What we need to price the job
For an accurate fixed quote, we need a clear picture of the site. Useful things to include:
- Any specification or named product
- Whether the building will be occupied during the work
- Anything awkward about access or site hours
- Any dates the work must fit around
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. For a chat about it beforehand, call 01277 525 020 or email drawings and photos.
Doing it in-house
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
FAQs: SO23
Can you supply RAMS and insurance details?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote. We hold CHAS accreditation and Constructionline membership and carry five million pounds of public liability insurance.
Do you take on multi-site sealant work?
Yes, we can. Give us the sites and the scope at each, and we will put together a fixed quote and a sensible order of work.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
Which sealant will you use?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Do you work in SO23?
Yes. SO23 falls within our area, and the simplest way to start is to phone 01277 525 020 or email a schedule or drawings.
Can weather delay the job?
Outside, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
Do you check for asbestos before removing sealant?
We check the asbestos register or survey before any old sealant is disturbed. The duty to manage asbestos sits with the dutyholder and removing it isn’t something we do.