Expansion and movement joint sealing in Totton, Hampshire
Planning work on a movement joint in Totton? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Weathered movement joint sealant that no longer flexes
- Sealant peeling off one face of the joint
- Expansion joints split through the centre of the bead
Expansion joint sealing for businesses in Totton
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Expansion joint sealing in Totton
Width, depth and product all have to work together. The joint has to be wide enough for the expected movement and the sealant’s movement capability while depth is limited by backing rod or, in shallow joints, a bond-breaker. For wider joints, the width-to-depth ratio is often around 2:1, as the manufacturer advises. We work on car park decks and ramps, cladding panel joints and blockwork control joints, and the usual reasons a site gets in touch are sealant peeling off one face of the joint and layers of sealant in a movement joint. One point of contact handles commercial sealant work in Totton from the first photos to the final walk-round, whether it’s one building or several.
Car parks and yards in towns like Totton take tyre loads and, in winter, de-icing salt. Catching a joint before its edges break is the simpler route.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Place
- Totton (SO40)
- Region
- Hampshire
- Cover
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Our process
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Most work in Totton is one building at a time: a school, a unit, an office or a block. Your photographs, drawings or a site visit come first, followed by a fixed quote.
- We assess the joints on site or from photos, noting widths and how each has failed.
- You receive a fixed quote stating the product and the movement it is rated for.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Preparing the site
- Flag any permit to work we will need
- Arrange parking or a loading space
- Share the asbestos register for older buildings
Get a fixed quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. For smaller jobs, photos and a description will do.
Related advice
FAQs: Totton
Do you take on work at healthcare sites like Tatchbury Mount Hospital?
Yes, hospitals are one of the sectors we cover. Each area is agreed with the ward or department and the estates team in advance.
Our building in Totton is near the coast: does that change the sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
What site paperwork can you supply?
Requirements differ from site to site, so tell us what you need and we will confirm it when we quote.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.
Can the building stay open while you work?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
Do you reseal car park expansion joints?
Yes, we do. These joints take wheels, salt and water, so product choice matters, and we’ll tell you if any edges need repairing first.
Cost factors for movement joints
We price every job individually. The main factors are:
- Induction, permit and paperwork requirements
- Whether the work must be split into stages
- The size and state of each joint
- Access and working height
A quote for movement joints depends on quantities, condition and access, and any specification that applies. Call for a quote.
Before you send an enquiry
Good information means a firmer quote. When you get in touch, include:
- Drawings or a marked-up plan, if available
- Clear photos of the problem areas
- Whether an asbestos survey exists
- The site address and postcode
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to call the office on 01277 525 020 or email us with what you know.
Leave it or put it right?
A like-for-like reseal of a joint that keeps splitting rarely lasts. A higher movement class, or a design change by the engineer, may be needed, and we’ll say so before quoting. Many buildings in towns like Totton have been extended or altered, so joints between old and new are often the first to go. Resealing them early protects the building behind.
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote and we’ll price your job on its own details.
Why clients in Totton choose us
- Products installed to the manufacturer’s instructions
- Failed material removed, not covered up
- CSCS-carded applicators
- Coloured sealants to suit the setting, where available
Towns and villages near Totton
Other services in Totton
Joints that move: notes for Totton
The sea is no more than about 2 miles from Totton. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, and edges left open tend to break up faster. Less than 3 miles from Totton there are at least three named estates and business parks. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
Campuses like Southampton Solent University (4.6 miles east of Totton) mix old and new buildings, with movement joints wherever they meet. Parks like Brokenford Business Park, 0.6 miles east of Totton, combine paved areas, car parks and building elevations, each with joints that move. A healthcare site such as Tatchbury Mount Hospital, 1.3 miles north-west of Totton, depends on car parks, ramps and service yards whose joints take traffic all day.
Totton is about 5 miles west of Southampton, in Hampshire. Totton sits inside our coverage and the rest of Hampshire, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Our Hampshire coverage takes in 723 places, large and small.
Commercial sites across SO40 are covered for movement joints. Buildings on High Street, Station Road South and Tedder Way are within our area. Access to Totton is via the A35 and A36 among other routes. Close to Totton, our area also takes in Ashurst Bridge (1 mile south-west), Hounsdown (1 mile south), Netley Marsh (1 mile west), Hillstreet (2 miles north) and Woodlands (2 miles south-west). Further afield, our area takes in Winchester (13 miles north-east), Eastleigh (8 miles north-east), Fareham (14 miles east), Chandler's Ford (7 miles north-east), Hedge End (9 miles east) and Lymington (11 miles south).
Local landmarks in Totton
In Totton, that means premises near The Cross Keys Public House and Hounsdown School and the streets around them. For rail, the closest station is Totton station, roughly 1 mile east. Other landmarks nearby include Tatchbury Mount Hospital (1.3 miles north-west) and Eling Experience (0.8 miles east). For a walk, there’s Testwood Lakes.
Work for main contractors and building owners
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Totton can form part of a wider programme across Hampshire.
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Honest limits
Sealant solves a lot, but not everything, and we are upfront when that’s the case. These need a different solution:
- Cracking or settlement that calls for an engineer’s assessment
- Proprietary pre-formed expansion joint systems
- Waterproofing layers buried beneath the sealant
Not sure which it is? You can phone 01277 525 020 or email the details over and we will tell you honestly.
What we seal
- Blockwork control joints
- Car park decks and ramps
- Podiums and floor movement joints
- Brickwork movement joints
- Cladding panel joints
- Precast concrete panel joints
After the work
Problems stay small when the joints are checked regularly. In particular:
- Inspect exposed joints once the cold weather has passed
- Keep scrapers and ploughs from dragging across joint sealant
- Plan racking layouts so feet don’t land on a joint
- Treat a small split as a warning, not a cosmetic issue
Debris does more harm to joint sealant than most people realise. Stones pressed into the bead by wheels or feet can puncture it, especially on car park decks and warehouse floors. Regular sweeping keeps joint lines clear.
Once debris packs a failed joint, the structure has nowhere to expand. The edges then take the pressure and start to spall, turning a sealant job into a repair job. Keeping the seal sound avoids all of that.