Expansion Joint Sealing in Shootash
Planning work on a movement joint in Shootash? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Leaks through car park deck joints onto the level below
- Expansion joints filled with dirt and stones
- Hardened, cracked sealant on exposed facades
Expansion joint sealing near Shootash
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How the quote is worked out
Quotes vary with the job. Expect it to depend on:
- Travel to remote or island sites
- Any access equipment needed
- Joint width, depth and condition
- The product specified
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Before you send an enquiry
A good diagnosis starts with the right details. Let us know:
- How the joints are reached, and at what height
- What the building is and how it’s used
- Whether an asbestos survey exists
- The postcode of the building
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or ring 01277 525 020 or email us to discuss it first.
About our expansion joint sealing in Shootash
Width, depth and product all have to work together. The joint has to be wide enough for the expected movement and the sealant’s movement capability, and depth is controlled using closed-cell backing rod, or bond-breaker tape in shallow joints. For wider joints, the width-to-depth ratio is often around 2:1, as the manufacturer advises, and the bead is tooled so it grips the two faces alone. Most enquiries involve hardened, cracked sealant on exposed facades and spalled or broken joint edges in floors and decks, across car park decks and ramps, blockwork control joints and cladding panel joints. Searching for sealant specialists in Shootash? We have been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
Smaller community and commercial buildings around Shootash have their own movement joints in walls and floors. They’re easily forgotten until water gets in or an edge breaks.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Where
- Shootash (SO51)
- Region
- Hampshire
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Leave it or put it right?
Re-sealing with the same product that failed is often a false economy. If the joint is too narrow or the product wrong for the movement, it needs a different approach. Converted and older buildings near places like Shootash tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.
Why choose Mastic Doctor in Shootash
- Colour options checked against the specified product
- Matching to RAL references, product permitting
- Fully insured
- CSCS-carded applicators
See how commercial sealant jobs are priced or our accreditations and insurance.
How the job changes by surface
Car park decks and ramps
Deck and ramp joints take tyre loads, grit and de-icing salts. We use a sealant made for wheel loads and the expected movement, phased so parts of the car park stay open.
Brickwork and blockwork joints
Mortar snots and debris in the joint stop it working. We clear the joint fully before sealing and flag any joint that seems undersized.
Floors, slabs and movement joints in Shootash
Shootash is in the South East, one of the UK’s drier regions. External joints still wait for dry conditions, and gritting in cold spells finds its way into open joints. The 3 miles around Shootash take in at least three named trading estates, business parks or retail parks. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
Estates like Budds Lane Industrial Estate, 2 miles east of Shootash, combine warehouse slabs, yards and loading bays, all with joints under wheels. Another example is Gardeners Business Park, 2.2 miles west of Shootash, where floors and yards would be done in stages around the occupiers. Large sites such as Romsey Hospital, 2.9 miles east of Shootash, have car parks, service roads and long elevations with movement joints in brick and panels.
Shootash is about 3 miles west of Romsey, in Hampshire. Businesses, contractors and managing agents in Shootash can call on us for movement joints. 723 places across Hampshire fall within our area, Shootash among them. For work in that direction, see our Southampton page.
Business premises anywhere in SO51 are within our area. Just outside Shootash, we also work in The Frenches (1 mile west), Plaitford Green (2 miles west), East Wellow (2 miles south), West Wellow (2 miles south-west) and Blackhill (3 miles south-west). Further afield, our area takes in Winchester (11 miles north-east), Eastleigh (9 miles east), Andover (15 miles north), Totton (6 miles south), Chandler's Ford (7 miles east) and Hedge End (12 miles south-east).
What’s near Shootash
In Shootash, that means premises near Stanbridge Earls School. Shootash’s nearest station is Romsey station, roughly 2.4 miles east of the centre. Nearby you will also find King Johns House (2.2 miles east) and Romsey Community Hospital (2.9 miles east). Green spaces nearby include Copythorne Common.
Your questions answered
Can you take on a job at a hospital such as Romsey Hospital?
Yes, hospitals are one of the sectors we cover. Each area is agreed with the ward or department and the estates team in advance.
Can you work at a site such as Budds Lane Industrial Estate, by Shootash?
Yes. We cover Shootash and the area around it, including industrial estates, business parks and retail parks such as Budds Lane Industrial Estate. Photos and a short description are enough for a first look.
Do you seal on top of existing sealant?
No. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Can you fit around our working hours?
We’re in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
Can you quote from photos?
It depends on the job. Simple work can often be priced from photographs, while larger or less clear jobs get a site visit first.
Do you take on multi-site work?
Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Nearby places to Shootash
More services for Shootash
Our process
We follow your site rules from the start: signing in, inductions and any permit to work. Once we’re cleared to begin, we take the joints in the sequence agreed with you, and each area is checked before we leave it. Rural sites near Shootash may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- We assess the joints on site or from photos, noting widths and how each has failed.
- A fixed quote names the sealant we propose and its movement class.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Preparing the site
- Have the specification and drawings to hand
- Flag any permit to work we’ll need
- Warn occupants and staff about the work
Ask for a quote
To get a fixed quote, phone 01277 525 020 or email us with the site address and an outline of the work. You can also send details through our quote form.
Related advice
Honest limits
Honesty saves time and money. New sealant won’t cure:
- Waterproofing layers buried beneath the sealant
- Proprietary pre-formed expansion joint systems
- Crumbling edges that would give a new bead nothing sound to grip
If in doubt, call 01277 525 020 or email us and we’ll say what we think before you book.
Surfaces we seal
- Blockwork control joints
- Podiums and floor movement joints
- Car park decks and ramps
- Cladding panel joints
- Brickwork movement joints
- Precast concrete panel joints
Keeping the joints sound
To get the most from the new sealant:
- Put movement joints on the planned maintenance inspection round
- Report split or peeling joint sealant early
- Keep racking legs and heavy point loads off floor joints
- Record the sealant used and the date in the O&M file
Debris does more harm to joint sealant than most people realise. Grit trodden or driven into the joint works at the surface until it tears and decks and floors suffer most. Regular sweeping keeps joint lines clear.
Joints sealed at the same time generally fail around the same time. Inspecting the whole run is worth the effort, so the work can be planned rather than rushed. We’ll tell you which movement joints need doing now and which can wait.