Expansion joint sealing in Shephall
We carry out expansion and movement joint sealing in walls, decks and floors in Shephall and the surrounding area. Send details for a fixed quote.
- Car park joints leaking onto vehicles below
- New sealant over old, now failing
- Debris jammed in movement joints
Expansion joint sealing in Shephall
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing in Shephall
Our movement joint work takes in walls, panels, decks and floors: vertical joints in brick and block facades, joints between precast or cladding panels, concrete slab and deck joints, ramps, podiums and internal floors. The product depends on the movement, the weather and anything that runs over it and we name it in the quote. We work on brickwork movement joints, blockwork control joints and cladding panel joints, and the failures we are asked to look at most are expansion joints split through the centre of the bead and expansion joints filled with dirt and stones. Facilities teams, main contractors and managing agents in Shephall tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Work in a smaller place like Shephall is typically one building at a time, so we gather photographs and measurements first. That way the right materials come on the day and the job is done in one visit where possible.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, ring 01277 525 020 or email a schedule or drawings and we will come back to it.
- Location
- Shephall (SG2, SG1)
- Wider area
- Hertfordshire
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Work for main contractors and building owners
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Towns and villages near Shephall
Other services in Shephall
Different surfaces, different methods
Car park decks and ramps
Deck and ramp joints take tyre loads, grit and de-icing salts. A trafficable sealant suited to the movement goes in.
Internal floor movement joints
Warehouse and retail floors have saw-cut induced joints and construction joints. Trafficked floor joints often get a semi-rigid filler and a flexible sealant where the joint moves more.
Looking after the joints
Your facilities or cleaning team can help the joints last. Share these points with them:
- Avoid parking heavy plant or pallets on joint lines
- Reopen bays and walkways only after the stated cure time
- Include every elevation and deck joint in periodic inspections
- Treat a small split as a warning, not a cosmetic issue
Snow ploughs and scrapers catch on joint lines. Raising blades over joints where possible protects the seal.
Joints sealed at the same time generally fail around the same time. Inspecting the whole run is worth the effort. We will tell you which movement joints need doing now and which can wait.
Common questions from Shephall clients
Is Monkswood Retail Park, near Shephall, within your area?
Yes. Our area takes in Shephall and its surroundings, with estates and business parks such as Monkswood Retail Park included. Send details of the unit and the work through our quote form for a quick quote.
Is a hospital such as Lister Hospital somewhere you can work?
Yes, hospitals are one of the sectors we cover. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Is any job too small?
We quote for single jobs as well as large packages and programmes. Photos and a description are enough to start.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
What do you charge?
There isn’t a price list, as every site differs. With photographs or drawings, we can give you a fixed quote.
How do I request a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photographs and a postcode.
How the quote is worked out
Each job is priced on its own details. The main factors are:
- Backing rod, priming and other preparation
- Whether old sealant has to be cut out first
- Working within restricted access windows
- Travel to remote or island sites
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote.
Before you send an enquiry
A good diagnosis starts with the right details. Tell us:
- Where the site is, with the postcode
- The asbestos register, for older buildings
- Whether the building will be occupied during the work
- A wide shot and a close-up of the area
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. For smaller jobs, photos and a description will do.
What we can’t put right
We check first that sealant really is the fix. It isn’t the answer for:
- Damaged metal nosings or cover plates over a joint
- Movement on a scale no sealant is meant to absorb
- Leaks coming from the membrane rather than the joint seal
Not sure which it is? You can give us a call on 01277 525 020 or email a schedule or drawings and we’ll tell you honestly before you book.
What we seal
- Blockwork control joints
- Precast concrete panel joints
- Brickwork movement joints
- Podiums and floor movement joints
- Car park decks and ramps
- Cladding panel joints
Warehouse floors and decks around Shephall
Central London is about 27 miles from Shephall. The roads out of London are lined with trade parks and distribution sheds, and their floor joints take forklift and pallet-truck traffic all day. Shephall is in the South East, one of the UK’s drier regions. External slab and deck joints still need a dry, clean joint to seal, and winter de-icing salt on car parks and ramps works into any open joint.
Sites like Lister Hospital (to the north-west of Shephall) carry ambulances, deliveries and visitors’ cars over their road and deck joints. Places like Monkswood Retail Park, 0.9 miles to the west of Shephall, put trolleys over floor joints inside and cars over slab joints outside. At places like Oaklands Retail Park, 1 mile to the west of Shephall, joints are sealed a section at a time so operations carry on.
Shephall is about 1 mile south of Stevenage, in Hertfordshire. We cover commercial sites throughout Shephall. Shephall is one of 371 places in Hertfordshire on our list for movement joints. We also cover London, around 27 miles from Shephall.
Commercial sites across SG2 and SG1 are covered. We cover commercial and managed buildings on Unwin Road, Oxleys Road and Burwell Road. If your building is just outside Shephall, we cover Aston (1 mile east), Bragbury End (1 mile south-east), Knebworth (2 miles south), Hook's Cross (2 miles south-east) and Woolmer Green (3 miles south). A short drive away, we cover Hemel Hempstead (15 miles south-west), St Albans (12 miles south-west), Bishop's Stortford (14 miles east), Welwyn Garden City (6 miles south), Harpenden (9 miles south-west) and Hitchin (6 miles north-west).
Local landmarks in Shephall
Recent enquiries here include premises near Coopers Inn, The Heathcote School and Barnwell School and the streets around them. The nearest railway station is Stevenage station, about 1.4 miles north-west. Nearby you’ll also find Benington Castle (2.6 miles east) and Lister Hospital (2.7 miles north-west). Not far away are Ridlins Mire.
How a job runs
Site rules come first: signing in, inductions and any permit to work. With the paperwork done, we take the joints in the sequence agreed with you. For a site in Shephall, we plan so the whole job is done in one go where possible. Photos with rough sizes let us arrive with everything needed.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- You get a fixed quote with the product and its movement capability stated.
- We strip out the old seal and prepare the faces, and we tell you if any edges need repairing first.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- Primer goes on where the manufacturer specifies it, followed by the sealant, which is then tooled off.
- Finished joints are checked and backed by our 12-month guarantee.
Before we start on site
- Tell us what induction or permit system the site runs
- Explain the parking and delivery arrangements
- Send your site hours and access windows
Get a fixed quote
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. For a chat about it beforehand, ring 01277 525 020 or email the details over.