Salen expansion joint sealing
Work needed on a movement joint in Salen? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Car park joints leaking onto vehicles below
- Chipped joint edges on forklift routes
- Hardened, cracked sealant on exposed facades
Expansion joint sealing for Salen sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
What happens if it’s left?
On a car park, resealing joints in phases keeps the deck open. Phased work by bay or zone lets the rest stay in use without shutting the whole car park. Tell us what has to stay open and we’ll plan around it. For buildings near Salen, dealing with all the failing joints at once saves return trips. Photos of each area help us quote the whole job.
Pricing movement joints depends on quantities, condition and access, and any specification that applies. Call for a quote.
Why us?
- Colour agreed before work starts
- Public liability insurance in place
- Sealing commercial buildings since 2005
- CHAS accredited
See how commercial sealant jobs are priced or our accreditations and insurance.
Expansion joint sealing in Salen
Long runs of brick or block have movement joints built in, and they’re easy to miss until the sealant fails. Failed sealant here lets rain into the wall and can leave the joint full of debris. The old seal comes out, backing goes in and a sealant with the right movement class is applied with primer where the maker calls for it. If you have damp inside where a wall movement joint has failed and new sealant over old, now failing, we can help. A specialist sealant contractor works differently from a general builder: in Salen, that means joint design, primers and backing rod as standard.
Weather windows decide external joint work around a place like Salen: dry faces and the right temperature are essential, so dates have some give. Inside slabs aren’t affected and can be scheduled around the occupier.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Salen (PA72)
- Region
- Argyll and Bute
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Site staff or a sealant specialist?
Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Diagnose, treat, sign off
Tell us your site hours and access windows and we’ll plan around them. While we’re working, the area stays contained and tidy, and your contact hears from us before we move to the next area. Travel to smaller Scottish places like Salen is planned so the job is finished in one visit where possible, which is why we ask for photos and a full list first. External joints need a dry spell as well.
- First, the joints are inspected for width, movement and the type of failure.
- You get a fixed quote with the product and its movement capability stated.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material, and we tell you if any edges need repairing first.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- Each joint is inspected and handed over with our 12-month guarantee.
What we need from you
- Tell us which areas need to stay in use
- Tell us your opening times and when work is allowed
- Tell us what induction or permit system the site runs
Get a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. For smaller jobs, photographs and a description will do.
Advice
Other services in Salen
When to call us in Salen
When a bead pulls away from one face, it has lost adhesion. Poor preparation, a skipped primer, or sealant bonded to the back of the joint are typical reasons, and it’s common on joints sealed in a hurry.
Things that usually lead to an enquiry:
- Leaks through car park deck joints onto the level below
- Previous reseals laid over old sealant
- Joints where the bead has lost adhesion
- Damp inside where a wall movement joint has failed
For floors and slabs around Salen, the product is chosen for the traffic and the movement at each joint.
Questions to ask before you book
- Whether their applicators hold CSCS cards
- How joint depth will be controlled
- Proof of insurance
- How long is the guarantee, and what does it include?
For managing agents and facilities managers
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end.
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Sites in Salen can sit alongside others in a wider programme across Argyll and Bute.
Questions we are asked in Salen
Do we have to stop operations in Salen while the joints are sealed?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. Tell us which hours and entrances we can use and we’ll plan from there.
Our building in Salen is near the coast: does that change the sealant?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
How do you deal with asbestos in old sealant?
The duty to manage asbestos sits with the building’s dutyholder, so we will ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and we will price the work to it, flagging anything that needs clarifying.
Do the joint edges need to be sound before sealing?
Sealant needs sound faces to bond to, so broken or crumbling edges have to be repaired first. We flag it at the quote stage where we can see it.
Are you CHAS accredited and on Constructionline?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Do you reseal car park expansion joints?
Yes. We use a sealant designed for wheel loads and the expected movement, and phased work can be planned so parts of the car park stay in use.
Warehouse floors and decks around Salen
Salen is within about 1 mile of the coast. Open joints in coastal car parks and yards let in salt-laden water as well as grit, so a failed joint lets more in and the edges break up sooner. Salen is on Scotland’s wetter western side. Open joints in external slabs take a lot of water. We wait for dry, workable days to seal them.
Around Salen, open joints collect water and debris, and the arrises are the next to go.
Salen is in Argyll and Bute. Any commercial site in Salen is covered, whether it’s a single job or part of a planned programme. Our Argyll and Bute coverage takes in 124 places. There’s a separate page for Glasgow, roughly 79 miles from Salen.
Work on movement joints is covered throughout PA72, for business premises of every kind. Streets here include Jarvisfield Road, Jarvisfield Place and Dunaros Gardens, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Lochaline (7 miles east), Baliscate (8 miles north-west), Ballygown (9 miles west), Tobermory (9 miles north-west) and Craignure (9 miles east). Where a site is remote or on an island, travel and materials need planning ahead, so include the location in your enquiry.
Local landmarks in Salen
Well-known places in the area include Aros Castle (1.3 miles north-west). Not far away are Cruach Tòrr an Lochain and Loch na Dàiridh.
Different surfaces, different methods
Brickwork and blockwork joints
Brick and block edges need careful preparation. Faces are prepared and primed wherever the sealant maker calls for it.
Podium joints
On podiums, the joint can belong to a larger waterproofing detail. We reseal the joint where sealant is the specified fix.