Expansion and movement joint sealing in Rushmoor, Surrey
Expansion and movement joint sealing in walls, decks and floors in Rushmoor. CHAS accredited and fully insured, with a 12-month guarantee.
- Chipped joint edges on forklift routes
- Debris jammed in movement joints
- Previous reseals laid over old sealant
Expansion joint sealing in Rushmoor
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Expansion joint sealing for commercial buildings in Rushmoor
We cover the full range of movement joints: brickwork and blockwork joints, precast and cladding panel joints, concrete joints, car park decks and ramps, podiums and floor movement joints. The product depends on the movement, the weather and anything that runs over it. We work on precast concrete panel joints, car park decks and ramps and podiums and floor movement joints, and what we’re called in for most is spalled or broken joint edges in floors and decks and joints where the bead has lost adhesion. For commercial sealant work in Rushmoor, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
For a site near Rushmoor, measurements and photographs up front mean one trip where possible. Tell us the joint widths if you can, and what drives or walks over them.
Every job we finish is backed by a 12-month workmanship guarantee, in Rushmoor as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- Rushmoor (GU10)
- Region
- Surrey
- Cover
- 12 months on every job
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Aftercare for building managers
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:
- Note which joints were done, when, and with what
- Leave barriers in place until fresh joint sealant has cured
- Look over external and deck joints after a hard winter
- Put movement joints on the planned maintenance inspection round
Every joint we seal is backed by a 12-month guarantee on workmanship. Record which product went into which joints in the building file, so the next reseal starts with the facts.
A failed deck joint lets water straight through to the level below. Salty water dripping through stains soffits and lands on parked vehicles, which is bad news for the concrete and the people parking below. Resealing early limits the damage.
What happens if it’s left?
Sealing over a failed movement joint is a common shortcut. A bead laid on top of the failed one neither grips nor flexes properly. Full removal and preparation is in every quote. Around Rushmoor, it’s better to renew all the failing joints at once, rather than one at a time. Send photographs of each area and we will quote for the lot.
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
What you get with us
- 12-month guarantee on workmanship
- CHAS accredited
- A range of standard colours, depending on the product
- Specification-led, product-correct work
Read how commercial sealant jobs are priced or our accreditations.
Towns and villages near Rushmoor
What else we do in Rushmoor
Questions we are asked in Rushmoor
Is a smaller place like Rushmoor outside your area?
No. Small places get the same service as large ones. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Would you work within a site like Haslemere and District Hospital?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, let us know and we will send them with the quote.
Is colour matching possible?
That depends on the product specified. Some ranges offer many colours, others very few, so we will confirm the colours available for the specified product with the quote.
Do the joint edges need to be sound before sealing?
The edges have to be sound. If they’re damaged, we will say so before any sealing, so the new seal has something to grip.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
What we can’t put right
Honesty saves time and money. New sealant won’t cure:
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
- Cracking or settlement that calls for an engineer’s assessment
- Concrete or masonry repairs along the arrises
If you’re not sure, just phone 01277 525 020 or use the quote form and we’ll give you a straight answer.
Surfaces we seal
- Cladding panel joints
- Blockwork control joints
- Precast concrete panel joints
- Brickwork movement joints
- Podiums and floor movement joints
- Car park decks and ramps
From enquiry to sign-off
Diagnose, treat, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Jobs in and around smaller places like Rushmoor are usually planned as a single visit, so photos and measurements up front really help. Then the right materials arrive with us.
- First, the joints are inspected for width, movement and the type of failure.
- Next, we fix a price and confirm the sealant we propose for the movement.
- The failed seal is removed and both faces are cleaned until sound and dry, and we tell you if any edges need repairing first.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- Primer goes on where the manufacturer specifies it, followed by the sealant, which is then tooled off.
- Finished joints are checked and backed by our 12-month guarantee.
Getting the site ready
- Send your site hours and access windows
- For older buildings, check the asbestos register before work
- Point out parking and an unloading spot
Quotes
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or give us a call on 01277 525 020 or email drawings and photos if you’d rather talk the job through.
Related advice
Slabs, ramps and loading bays in Rushmoor
Rainfall across the South East, Rushmoor included, is lower than in many parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, and winter de-icing salt on car parks and ramps works into any open joint. At about 37 miles from central London, Rushmoor is within reach of the capital. Warehousing clusters around the motorways that ring and radiate from London; their floors carry heavy traffic every shift.
For estates staff at a university like University for the Creative Arts, 4.7 miles to the north-west of Rushmoor, building and paving joints are part of the planned maintenance list. Hospitals like Haslemere and District Hospital (4.9 miles south of Rushmoor) have multi-storey or surface car parks whose joints carry vehicles round the clock.
Rushmoor is about 4 miles south-east of Farnham, in Surrey. Our applicators travel to Rushmoor for work on movement joints, handled exactly as we handle every other area. Rushmoor is one of 379 places we cover in Surrey. We also cover Reading, some 22 miles away.
Work on movement joints is covered throughout GU10, for business premises of every kind. Buildings on Sandy Lane, Lowicks Road and Tilford Road are within our area for movement joints. Just outside Rushmoor, we also work in Tilford Common (1 mile north), Pitch Place (1 mile south-east), Crosswater (1 mile south-west), Thursley (2 miles east) and Green Cross (2 miles south). A short drive away, we cover Guildford (10 miles north-east), Woking (13 miles north-east), Camberley (12 miles north), Farnham (4 miles north-west), Frimley (11 miles north) and Haslemere (5 miles south).
Local landmarks in Rushmoor
In Rushmoor, that means premises near Bel And The Dragon-Churt pub and The Flashes, among other places. For rail, the closest station is Farnham station, about 4.2 miles north-west of the centre. Well-known places in the area include Haslemere and District Hospital (4.9 miles south) and Farnham Castle (4.8 miles north-west). For a walk, there’s Gibbet Hill and Upper Lake.
Quoting for work in Rushmoor
There’s no standard rate for sealant work, because every site is different. What we look at:
- Distance, for remote addresses
- The total length or number of joints
- Specialist products, such as fire-rated or hygienic sealants
- The site’s rules and procedures
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
What we need to price the job
We can often quote from photographs and a few details. Please tell us:
- Clear photographs of the problem areas
- Approximate linear metres or a joint schedule
- Where the site is, with the postcode
- When you need the work done
To get a fixed quote, give us a call on 01277 525 020 or use the quote form, telling us the site location and the nature of the job. Our quote form is another easy route.
Surface by surface
Joints between different materials
Junctions between brick and render, or concrete and cladding, move independently. We choose a sealant that grips both faces.
Concrete and precast panel joints
Joints between precast panels open and close with temperature and loading. The sealant needs the right movement capability and a controlled depth.