Riddrie expansion joint sealing
Expansion joint sealing for Riddrie, from a contractor working since 2005. Fully insured and CHAS accredited.
- Movement joints with split or torn sealant
- Previous reseals laid over old sealant
- Chipped joint edges on forklift routes
Expansion joint sealing near Riddrie
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
When something else is needed
Part of a good diagnosis is knowing where sealant stops. You will hear from us if the cause turns out to be any of the following:
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- Damaged metal nosings or cover plates over a joint
- Crumbling edges that would give a new bead nothing sound to grip
If in doubt, phone 01277 525 020 or email a schedule or drawings and we will say what we think.
Surfaces we seal
- Precast concrete panel joints
- Car park decks and ramps
- Brickwork movement joints
- Blockwork control joints
- Podiums and floor movement joints
- Cladding panel joints
Expansion joint sealing in Riddrie
We cover the full range of movement joints: vertical joints in brick and block facades, joints between precast or cladding panels, concrete slab and deck joints, ramps, podiums and internal floors. The product depends on the movement, the weather and anything that runs over it. If you are dealing with car park joints leaking onto vehicles below and sealant peeling off one face of the joint, we can help, on blockwork control joints, car park decks and ramps and precast concrete panel joints alike. Most enquiries from Riddrie start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Scotland’s cities have multi-storey car parks, shopping centres, university and hospital estates, all with movement joints in decks, floors and walls. Failed joints let water in, and repeated frost then works on the edges.
Every job is signed off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Where
- Riddrie (G33, G32, G21)
- Region
- Glasgow
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
How a job runs
Site rules come first: sign-in, induction and whatever permit system the building uses. With the paperwork done, we take the joints in the sequence agreed with you, and each area is checked before we leave it. In a Scottish city, kerbside space and loading need planning, especially near the centre. Shared closes, stairs and the property factor may need to be part of the plan.
- Photos, joint lengths and drawings come to us, or we visit.
- Joint widths and expected movement are checked against what the sealant can take, and flag anything that needs an engineer.
- Every joint is cleared of the failed seal and any grit packed into it.
- Any broken arrises or friable edges are flagged before work goes further.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
Preparing the site
- Send your site hours and access windows
- Flag any permit to work we will need
- Warn occupants and staff about the work
Request a quote
Need a figure for a tender or a budget? We will quote against your scope and drawings you can plan around. If you have questions first, call 01277 525 020 or use the quote form.
Related advice
General trades versus a specialist
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
What affects the price in Riddrie
Quotes vary with the job. It mainly depends on:
- Any access equipment needed
- The site’s rules and procedures
- Whether the work must be split into stages
- The size and state of each joint
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote and we will price your job on its own details.
Before you send an enquiry
For an accurate fixed quote, we need to understand the site. Useful things to include:
- How the joints are reached, and at what height
- Clear photographs of the problem areas
- The postcode of the building
- The product your specification calls for
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
Common questions from Riddrie clients
Do we have to stop operations in Riddrie while the joints are sealed?
Normally not: we work in sections and hand each one back once it has cured. Tell us which hours and entrances we can use and we’ll plan from there.
Can you work on a hospital site such as Lightburn Hospital?
Yes. We work in healthcare settings as well as offices and schools. Each area is agreed with the ward or department and the estates team in advance.
Can you seal joints in cold or wet weather?
A wet joint can’t be sealed properly, so external work waits for suitable conditions. We agree a revised date with you.
Can the building stay open while you work?
In the majority of cases, yes. Phased work can be planned so areas stay in use.
Is movement joint sealing guaranteed?
A 12-month guarantee covers our workmanship, and we are fully insured for public liability. Regular sweeping and inspection help the joints last.
What will the job cost?
Every job gets its own fixed quote. For yours, call the office on 01277 525 020 or send photos by email with a description of the work.
What’s the quickest route to a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photos and a postcode.
What happens if it’s left?
Closing a car park for a reseal is rarely an option. Work can be planned so parts of the deck stay open. We agree phasing with you before work starts. In Riddrie, as across Scotland, rain finds any gap, and failed external joints let it into stone walls and around frames. Renewing them early protects the fabric.
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote and we’ll explain how it’s made up.
Why appoint us
- 12 months’ guarantee on every job
- Colours confirmed for the specified product
- One phone line for London, the South East and Scotland
- Standard and matched colours in many product ranges
Take a look at what affects the cost or how we’re accredited.
Also near Riddrie
What else we do in Riddrie
Different surfaces, different methods
Cladding panel joints
We confirm what access is in place before pricing. Photos taken near the joints help us price accurately or a site visit fills the gaps.
Internal floor movement joints
Warehouse and retail floors have saw-cut induced joints and construction joints. A semi-rigid filler is common in trafficked industrial floors and a flexible sealant where the joint moves more.
Expansion joint sealing in Riddrie: the local picture
The 3 miles around Riddrie take in at least three named trading estates, business parks or retail parks. Their warehouses, yards and car parks are exactly where joints take the most punishment. Being in the west of Scotland, Riddrie gets more rain than eastern areas. Open joints in car parks and yards let in more water than in drier areas. Outside joints are sealed in dry spells, so dates have some give.
University campuses such as University of Strathclyde (to the west of Riddrie) have car parks, paved walkways and building elevations with movement joints. At a retail site such as The Forge Shopping Centre, which lies south of Riddrie, trolleys, cages and cars run over floor and slab joints all day. For an estate such as Lightburn Hospital, which lies south-east of Riddrie, the joints in ramps, decks and long building elevations all need attention over time.
Riddrie is about 3 miles south-east of Bishopbriggs, in Glasgow. Anywhere in G33, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. 171 places across Glasgow fall within our area, Riddrie among them.
If you need expansion joint sealing in G33, G32 and G21, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Buildings on Lee Avenue, Provan Road and Grierson Lane are within our area for movement joints. Access to Riddrie is via the A80. Sites close to Riddrie are covered too, including Blackhill (1 mile west), Carntyne (1 mile south), Ruchazie (1 mile east), Cranhill (1 mile south-east) and Hogganfield (1 mile north-east). A short drive away, we cover Glasgow (4 miles west), Hillhead (4 miles west), Dowanhill (4 miles west), Woodlands (3 miles west), Woodside (3 miles west) and North Kelvinside (4 miles west).
What’s near Riddrie
In Riddrie, that means premises near Parkhead Library, All Saints RC Secondary and Springburn Park, among other places. For rail, the closest station is Alexandra Parade station, roughly 1 mile south-west of the centre. Nearby you’ll also find Bishop's Castle (2 miles west) and Tollcross Museum (1.6 miles south). The countryside around Riddrie includes Lenzie Moss and Hogganfield Loch.