Expansion and movement joint sealing in Ningwood, Isle of Wight
Looking for expansion joint sealing in Ningwood? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Leaks through car park deck joints onto the level below
- Torn sealant in brick or block movement joints
- Brittle, chalky sealant on external joints
Need expansion joint sealing in Ningwood?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Expansion joint sealing in Ningwood, done properly
Few joints take as much punishment as those in a car park. Wheel loads, grit and de-icing salts attack the seal and the concrete either side, so failed seals soon lead to leaks onto the level below and broken edges. We reseal deck and ramp joints with a trafficable sealant chosen for the movement, phasing bays so the car park can stay in use. Site teams most often ask us about expansion joints split through the centre of the bead and new sealant over old, now failing, across precast concrete panel joints, podiums and floor movement joints and cladding panel joints. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Ningwood, preparation and product choice get the time they need.
In and around smaller places like Ningwood, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Location
- Ningwood (PO41)
- Wider area
- Isle of Wight
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Our process
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. If others near Ningwood need work, visits can be combined. A fixed quote is given before anything starts.
- We look at the joints, their width and how they’ve failed.
- Next, we fix a price and confirm the sealant we propose for the movement.
- We strip out the old seal and prepare the faces, and we tell you if any edges need repairing first.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- Primer goes on where the manufacturer specifies it, followed by the sealant, which is then tooled off.
- Finished joints are checked and backed by our 12-month guarantee.
Getting the site ready
- Clear stock, furniture or equipment away from the joints
- Send your site hours and access windows
- Send asbestos survey details if the building is pre-2000
Request a quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or phone 01277 525 020 or email the details over if you’d rather talk the job through.
Related advice
What sealant work can’t fix
Being straight saves everyone time. New sealant won’t cure:
- Joints too narrow for the movement, which need redesigning by the engineer
- Broken or spalled joint edges, which need repairing before any sealant goes in
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
If you are not sure, just speak to us on 01277 525 020 or use the quote form and we’ll give you a straight answer.
Joints and surfaces we work on
- Cladding panel joints
- Podiums and floor movement joints
- Car park decks and ramps
- Brickwork movement joints
- Blockwork control joints
- Precast concrete panel joints
Surface by surface
Internal floor movement joints
Wheeled traffic chips floor joint edges that aren’t supported. We match the product to the traffic and the movement.
Cladding panel joints
Cladding panels move more than masonry as they heat and cool. The joints need a low-modulus sealant with enough movement capability.
Floors, slabs and movement joints in Ningwood
Ningwood is within about 2 miles of the coast. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, and edges left open tend to break up faster. The South East is one of the drier parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, and winter de-icing salt on car parks and ramps works into any open joint.
Hospitals like St Mary's Hospital, 5.9 miles east of Ningwood, have multi-storey or surface car parks whose joints carry vehicles round the clock. For buildings at a park such as Porchfield Business Park (2.5 miles north-east of Ningwood), brick and panel movement joints are easy to forget until one leaks.
Ningwood is about 6 miles west of Newport, in the Isle of Wight. Businesses, contractors and managing agents in Ningwood use us for work on movement joints. 125 places across the Isle of Wight fall within our area, including Ningwood. Southampton is covered too, some 16 miles away.
Business premises anywhere in PO41 are within our area for movement joints. Just outside Ningwood, we also work in Newbridge (1 mile south-east), Wellow (1 mile west), Thorley Street (1 mile west), Shalcombe (2 miles south) and Calbourne (2 miles south-east). Bigger towns within reach include Newport (6 miles east), Ryde (12 miles east), Cowes (7 miles north-east), Sandown (12 miles east), Shanklin (12 miles east) and Ventnor (12 miles south-east). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you speak to us on 01277 525 020 or use the quote form.
Landmarks near Ningwood
Locally, jobs take us to sites close to New Inn. A little further out are St Mary's Hospital (5.9 miles east) and Yarmouth Castle (3.1 miles west). Not far away are Lymington and Keyhaven Marshes Nature Reserve and Westover Down.
Should maintenance staff do it?
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Work for main contractors and building owners
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.
Other services in Ningwood
Common problems we fix in Ningwood
With no backing rod or bond-breaker in place, sealant grips the base of the joint too. Bonded on three faces, it can’t stretch evenly when the joint opens so backing is set before sealing.
If one of these sounds familiar, it’s time for a closer look:
- Torn sealant in brick or block movement joints
- Joints packed with grit and debris
- Sealant peeling off one face of the joint
- Water dripping through deck or ramp joints
For a school such as Shalfleet Church of England Primary School, playground and building joints can be done in the holidays.
Questions to ask before you book
- How long is the guarantee, and what does it include?
- Do they follow the manufacturer’s priming guidance?
- Are they CHAS accredited or on Constructionline?
- Whether their applicators hold CSCS cards
Questions we are asked in Ningwood
Is a smaller place like Ningwood outside your area?
Not at all. Ningwood is within our area. We cover Greater London and the counties of the South East. Good photos up front let us bring everything on the first visit.
Our building in Ningwood is near the coast: does that change the sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators, as many construction sites ask for.
Why has the sealant in our expansion joints split?
The common causes are poor preparation, three-sided adhesion, the wrong movement class and weathering. We diagnose which one it is before resealing.
Are expansion joints and movement joints the same thing?
The terms overlap a great deal. A movement joint allows for expansion, contraction, shrinkage and loading, and the seal across it keeps water and debris out.
Are you fully insured?
Yes. We are fully insured, and the certificate can go with your quote.
Can weather delay the job?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.