Expansion and movement joint sealing in Newhaven, Edinburgh
Planning work on a movement joint in Newhaven? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Sealant pulling off the joint face
- Spalled or broken joint edges in floors and decks
- Hardened, cracked sealant on exposed facades
Expansion joint sealing across Newhaven
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our expansion joint sealing in Newhaven
A movement joint only works while its seal does. When the sealant splits or lets go, the gap fills with dirt and water. Dealt with early, it stays a sealant job rather than a concrete or masonry repair. Most enquiries involve hardened, cracked sealant on exposed facades and chipped joint edges on forklift routes, across brickwork movement joints, podiums and floor movement joints and precast concrete panel joints. Searching for sealant specialists in Newhaven? We have been sealing commercial buildings since 2005, with CSCS-carded applicators.
Scotland’s cities have multi-storey car parks, shopping centres, university and hospital estates, all with movement joints in decks, floors and walls. Failed joints let water in, and repeated frost then works on the edges.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Where
- Newhaven (EH6, EH5, EH7)
- Wider area
- Edinburgh
- Cover
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Warehouse floors and decks around Newhaven
Newhaven sits close to the coast, within about 1 mile. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, so it pays to keep them sealed. Less than 3 miles from Newhaven there are at least three named estates and business parks. Their warehouses, yards and car parks are exactly where joints take the most punishment.
At places like South Fort Trade Park, 0.6 miles south-east of Newhaven, joints are sealed a section at a time so operations carry on. Warehouse floors on estates like North Leith Sands Industrial Estate, less than half a mile east of Newhaven, carry pallet trucks and forklifts over every saw-cut joint. At a retail site such as Newkirkgate Shopping Centre, 1 mile south-east of Newhaven, trolleys, cages and cars run over floor and slab joints all day.
Newhaven is about 3 miles north of Edinburgh, in Edinburgh. Commercial clients in Newhaven can call on us for movement joints. We work across 174 places in Edinburgh.
Commercial sites across EH6, EH5 and EH7 are covered. For a building on York Road, Park Road and Ferry Road or nearby, send details and we’ll quote for movement joints. Newhaven sits on or close to the A901, useful when we plan access and materials. Just outside Newhaven, we also work in Victoria Park (1 mile south), North Leith (1 mile south-east), Bonnington (1 mile south-east), Powderhall (1 mile south) and Leith (1 mile east). Further afield, our area takes in Edinburgh (3 miles south), West Coates (3 miles south-west), Sciennes (3 miles south), Merchiston (3 miles south), Newington (3 miles south) and Queensferry (8 miles west).
Near you in Newhaven
In Newhaven, that means premises near Drummond Community High School, Starbank Park and McDonald Road Library. For rail, the closest station is Edinburgh Waverley station, roughly 1.9 miles south. Well-known places in the area include History of Education Centre aka Victorian Schoolroom (less than half a mile north) and Leith Hospital (0.7 miles south-east). For a walk, there’s Dunsapie Loch and The New Leaf Co-op.
Cost factors for movement joints
Sealant work doesn’t have a standard rate, because every site is different. What we look at:
- Joint width, depth and condition
- Induction, permit and paperwork requirements
- Removal of failed or old sealant
- Access and working height
A quote for movement joints depends on how many there are, their condition and the access, plus any specification you are working to. Ask us for a fixed quote.
What to include in your enquiry
To price the job accurately, we need a clear picture of the site. Useful things to include:
- Clear photographs of the problem areas
- The type of building and who uses it
- Access details, including height
- Rough lengths or quantities, or drawings if you have them
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or speak to us on 01277 525 020 or send details through our quote form to discuss it first.
After the work
Once the work is signed off, a little attention goes a long way:
- Reopen bays and walkways only after the stated cure time
- Report split or peeling joint sealant early
- Look over external and deck joints after a hard winter
- Raise snow-clearing blades over deck joints where possible
Every joint we seal is backed by a 12-month guarantee on workmanship. Keep the handover details, product and date with your O&M records, so the next reseal starts with the facts.
An open joint fills with grit, and a joint full of grit can’t close. The arrises crack and break away under the load, turning a sealant job into a repair job. A sound seal keeps the joint working.
For managing agents and facilities managers
Building owners and managing agents use us on everything from one building to a spread of sites around Newhaven. One quote can cover more than one site, which keeps the paperwork simple.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
Should maintenance staff do it?
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
On site: what to expect
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself typically takes anything from part of a day to a couple of weeks, depending on joint lengths, widths and access, and our waste is bagged and taken away as we go. Work on a big city site in Scotland typically involves inductions and permits. Tell us the rules and we’ll work to them.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Where areas have to stay open, we agree a phased sequence before starting.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
What we need from you
- Tell us what induction or permit system the site runs
- Arrange parking or a loading space
- Make sure the joints can be reached
Getting a fixed quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Read more
Questions about Newhaven
Is a hospital such as Western General Hospital (Edinburgh) somewhere you can work?
Yes. Healthcare sites are among the places we work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Does your area include sites such as North Leith Sands Industrial Estate, near Newhaven?
Yes. Estates, retail parks and business parks around Newhaven, North Leith Sands Industrial Estate among them, are all within reach. A few photos and the unit address let us price the work.
What site paperwork can you supply?
Requirements differ from site to site, so tell us what you need and we’ll confirm it when we quote.
What timescale should we allow for resealing expansion joints?
Expect a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing. Cure time before reopening is confirmed on the day.
What will the job cost?
It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote and we’ll price it properly.
Do you reseal car park expansion joints?
Yes. We use a sealant designed for wheel loads and the expected movement.
Are you insured?
Yes. We are fully insured, and the certificate can go with your quote.
Also near Newhaven
What else we do in Newhaven
What sealant work can’t fix
Being straight saves everyone time. Fresh joints won’t solve:
- Crumbling edges that would give a new bead nothing sound to grip
- Waterproofing layers buried beneath the sealant
- Changing the joint layout or spacing of a structure
If you are not sure, just call 01277 525 020 or email drawings and photos and we’ll give you a straight answer before you book.
Surfaces we seal
- Brickwork movement joints
- Cladding panel joints
- Precast concrete panel joints
- Car park decks and ramps
- Blockwork control joints
- Podiums and floor movement joints