Expansion and movement joint sealing in Netherton, Glasgow
Expansion and movement joint sealing in walls, decks and floors across Netherton, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Previous reseals laid over old sealant
- Movement joints with split or torn sealant
- Hardened, cracked sealant on exposed facades
Need expansion joint sealing in Netherton?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle expansion joint sealing in Netherton
For movement joints in Netherton, photographs and approximate lengths are the best start. Send them through our quote form, and we will arrange a site visit if needed before issuing a fixed quote. You can also ring 01277 525 020 or email drawings and photos to talk the joints through. If you have chipped joint edges on forklift routes and damp inside where a wall movement joint has failed, we can help, on cladding panel joints, blockwork control joints and car park decks and ramps alike. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Netherton, preparation and product choice get the time they need.
Around the edges of Scotland’s cities are warehouses, trade counters and distribution units, whose floor joints take forklift and pallet-truck traffic daily. The right filler or sealant, laid in phases, keeps them operating.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Where
- Netherton (G13, G61, G12)
- Region
- Glasgow
- Guarantee
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Surface by surface
Car park decks and ramps
Deck and ramp joints take tyre loads, grit and de-icing salts. A trafficable sealant suited to the movement goes in.
Concrete and precast panel joints
Precast panels often have surface residues that sealant won’t bond to. We prepare the faces thoroughly and prime where the maker calls for it.
Also near Netherton
More services for Netherton
Aftercare for building managers
Regular inspection catches problems early. Specifically:
- Leave barriers in place until fresh joint sealant has cured
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
- Look over external and deck joints after a hard winter
- Put movement joints on the planned maintenance inspection round
Keep wheels, feet and water off new joints until the sealant has cured. How long that takes depends on the product, the temperature and the depth of the joint, and we confirm it for each area before we leave. Keeping the area coned off until then avoids tyre marks and damage.
A failed deck joint lets water straight through to the level below. That water often carries de-icing salts with it. Sealing the joint promptly stops it at source.
Questions we are asked in Netherton
Can you work on a hospital site such as Gartnavel Royal Hospital?
Yes. We work in healthcare settings as well as offices and schools. Each area is agreed with the ward or department and the estates team in advance.
Is Anniesland Industrial Estate, near Netherton, within your area?
Yes. We cover Netherton and the area around it, including industrial estates, business parks and retail parks such as Anniesland Industrial Estate. Photos and a short description are enough for a first look.
Are you CHAS accredited and on Constructionline?
Yes. We’re CHAS accredited and a Constructionline member.
Can you seal car park deck joints?
Yes. These joints take wheels, salt and water, so product choice matters and broken edges are flagged before sealing.
Is Netherton in your area?
Yes. Netherton is in our area and the rest of Glasgow. To discuss a job, give us a call on 01277 525 020 or use the quote form.
What site paperwork can you supply?
Each site asks for different documents, so tell us what you need and we will confirm it when we quote.
Which product is best for expansion joints?
The right product depends on the joint. Low-modulus neutral-cure silicone suits many facade joints, while polyurethane is common in trafficked floor and deck joints unless the specification names something else.
Honest limits
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- Movement on a scale no sealant is meant to absorb
- Leaks coming from the membrane rather than the joint seal
- Damaged metal nosings or cover plates over a joint
If in doubt, call the office on 01277 525 020 or send details through our quote form and we’ll say what we think before you book.
Joints and surfaces we work on
- Car park decks and ramps
- Brickwork movement joints
- Cladding panel joints
- Podiums and floor movement joints
- Blockwork control joints
- Precast concrete panel joints
Diagnose, treat, sign off
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself typically takes a day or so for a modest run of joints, and longer where decks, ramps or floors are done in phases, and our waste is bagged and taken away as we go. Give us the access times and building rules for your premises in Netherton, so the work can be phased and areas kept in use.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- You get a fixed quote with the product and its movement capability stated.
- We strip out the old seal and prepare the faces, and we tell you if any edges need repairing first.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- Each joint is inspected and handed over with our 12-month guarantee.
Preparing the site
- Tell us which areas need to stay in use
- Tell us your opening times and when work is allowed
- Move anything stored against the joints
Get a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. For smaller jobs, photographs and a description will do.
Read more
Why it’s worth doing now in Netherton
Some quotes just add sealant over the old bead. A bead over the old seal can’t bond or flex. We cut out the old seal and prepare the faces every time. Scottish city buildings take plenty of rain, so a split or hardened joint lets water into the wall. Resealing promptly protects the stone and the interior.
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you’ll have a fixed figure to work with.
What you get with us
- Colours confirmed for the specified product
- CHAS accredited
- One phone line for London, the South East and Scotland
- RAL and finish matching where the product range allows
Read how commercial sealant jobs are priced or our accreditations.
Traffic, movement and joints around Netherton
Being in the west of Scotland, Netherton gets more rain than eastern areas. Rainwater through open yard and deck joints is a bigger issue here than in the drier east. We wait for dry, workable days to seal them. The 3 miles around Netherton take in at least three named trading estates, business parks or retail parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.
For estates staff at a university like University of Glasgow Garscube Campus (0.7 miles north-east of Netherton), building and paving joints are part of the planned maintenance list. At a retail site such as Knightswood Shopping Centre, 1.4 miles to the south-west of Netherton, trolleys, cages and cars run over floor and slab joints all day. Phasing is what makes joint work possible on busy sites such as West of Scotland Science Park (Kelvin Campus) (0.7 miles north-east of Netherton): one bay, aisle or car park row at a time.
Netherton is about 2 miles south of Bearsden, in Glasgow. We send applicators to Netherton for movement joints. Across Glasgow, 171 places are covered, Netherton among them.
We cover the G13, G61 and G12 postcode districts. If your site is on Ilay Road, Saxon Road and Cedric Road or close by, send details and we’ll quote for movement joints. Access to Netherton is via the A82, so getting applicators and materials to site is simple. Just outside Netherton, we also work in Temple (1 mile south), Anniesland Cross (1 mile south), Anniesland (1 mile south), Knightswood (1 mile south-west) and Dawsholm (1 mile east). A short drive away, we cover Glasgow (4 miles south-east), Woodlands (3 miles south-east), Woodside (3 miles south-east), Garnethill (3 miles south-east), Anderston (3 miles south-east) and Calton (5 miles south-east).
Around Netherton
Locally, jobs take us to sites close to Lock 27 pub, Jordanhill College and Dawsholm Park, among other places. The closest station to Netherton is Westerton station, roughly 0.6 miles north-west of the centre. Nearby you will also find Partick Castle (2.2 miles south-east) and Glasgow Museum of Transport (2.4 miles south-east). Open spaces near Netherton include Castle Hill and Kilmardinny.
General trades versus a specialist
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.