Kenmore expansion joint sealing
Sealant work in Kenmore for main contractors, managing agents and facilities managers: expansion and movement joint sealing in walls, decks and floors, quoted at a fixed price.
- Weathered movement joint sealant that no longer flexes
- Expansion joints filled with dirt and stones
- Leaks through car park deck joints onto the level below
Expansion joint sealing for businesses in Kenmore
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
What happens if it’s left?
Spot repairs can be useful on a tight budget. But if the rest of the run is the same age and product, it’s usually not far behind, and a second visit means paying for access again. Where it helps, we quote both options. For buildings near Kenmore, dealing with all the failing joints at once saves return trips. Send photographs and we’ll quote for everything together.
Pricing movement joints depends on quantities, condition and access. Ask us for a fixed quote.
Why choose Mastic Doctor in Kenmore
- A Constructionline member, so easy to vet
- Work carried out by CSCS-carded applicators
- CHAS accredited
- Workmanship guaranteed for 12 months
See what affects the cost and our accreditations and insurance.
About our expansion joint sealing in Kenmore
We cover the full range of movement joints: brickwork and blockwork joints, precast and cladding panel joints, concrete joints, car park decks and ramps, podiums and floor movement joints. Every one calls for a sealant picked for its movement, exposure and traffic, and we will confirm the choice in the quote. If you have layers of sealant in a movement joint and water dripping through deck or ramp joints, we can put it right, whatever the surface. Most enquiries from Kenmore start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
In smaller places such as Kenmore, the joints we are asked about sit in workshops, farm sheds, schools and halls. Concrete slabs and yards there take vehicles and weather.
Our workmanship is guaranteed for 12 months, in Kenmore as everywhere else we work. If our installation lets you down in that time, we return and fix it.
- Place
- Kenmore (PH15)
- Region
- Perth and Kinross
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Questions we’re asked in Kenmore
Will our site in Kenmore have to close for joint sealing?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. Tell us which hours and entrances we can use and we’ll plan from there.
Which documents can you supply for work in Kenmore?
RAMS, insurance certificate, CSCS details: list what the site needs and we will confirm it with the quote. We’re CHAS accredited and a Constructionline member, with £5m public liability insurance and CSCS-carded applicators.
What sealant do you use in movement joints?
The right product depends on the joint. Facades often take a low-modulus silicone; floors and decks normally need a polyurethane, and the specification has the final say.
Is colour matching possible?
That depends on the product. Some ranges offer many colours, others very few, so we’ll confirm the colours available for the specified product with the quote.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Can you work while the building is occupied?
Yes, with some planning. We agree a sequence with your contact so just one area at a time is disrupted.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and we will price the work to it.
How a job runs
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work usually takes a day or so for a modest run of joints, and longer where decks, ramps or floors are done in phases, and we clear our waste as we work. Travel to smaller Scottish places like Kenmore is planned so the job is finished in one visit where possible, which is why we ask for photos and a full list first. Outside work also needs a suitable weather window.
- Photos, joint lengths and drawings come to us, or we visit.
- We compare each joint’s width with the movement and the sealant’s capability and tell you if the design looks wrong for the movement.
- Every joint is cleared of the failed seal and any grit packed into it.
- Any broken arrises or friable edges are flagged before work goes further.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Each area is handed back after its cure time, under our 12-month guarantee.
Before we start on site
- Tell us your opening times and when work is allowed
- Tell us what induction or permit system the site runs
- Explain the parking and delivery arrangements
Getting a fixed quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, phone 01277 525 020 or use the quote form.
Advice
Nearby places to Kenmore
Other services in Kenmore
Doing it in-house
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Aftercare for building managers
Once the work is signed off, a little attention goes a long way:
- Put movement joints on the planned maintenance inspection round
- Leave barriers in place until fresh joint sealant has cured
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
- Keep scrapers and ploughs from dragging across joint sealant
Debris does more harm to joint sealant than most people realise. Grit trodden or driven into the joint works at the surface until it tears and decks and floors suffer most. A routine sweep is the simplest protection.
When one joint fails, others of the same age are rarely far behind. Inspecting the whole run is worth the effort so you can prioritise and budget. We will tell you which movement joints need doing now and which can wait.
Commercial clients in Kenmore
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules.
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
When something else is needed
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- Crumbling edges that would give a new bead nothing sound to grip
- Damaged metal nosings or cover plates over a joint
- A joint that has to be widened or re-detailed before it can work
If you are not sure, just phone 01277 525 020 or email the details over and we’ll give you a straight answer.
Surfaces we seal
- Car park decks and ramps
- Precast concrete panel joints
- Cladding panel joints
- Podiums and floor movement joints
- Brickwork movement joints
- Blockwork control joints
Slabs, ramps and loading bays in Kenmore
The east of Scotland, where Kenmore is, gets less rain than the west. Frost and de-icing salt still find their way into open external joints. Autumn is a sensible time to seal them.
A joint near Kenmore that has lost its sealant lets in water and grit, and the edges suffer next. Around Kenmore, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Kenmore is about 24 miles north-west of Perth, in Perth and Kinross. We send applicators to Kenmore for movement joints. Kenmore is one of 114 places we cover in Perth and Kinross. There’s a separate page for Dundee, about 40 miles away.
Work on movement joints is covered throughout PH15. Among the streets we cover are The Square, Taymouth Drive and Pier Road. Sites close to Kenmore are covered too, including Acharn (1 mile south-west), Fearnan (3 miles west), Boreland (4 miles west), Aberfeldy (6 miles north-east) and Little Ballinluig (9 miles north-east).
Local landmarks in Kenmore
Well-known places in the area include Scottish Crannog Centre (0.5 miles south-west) and Taymouth Castle (less than half a mile north). For a walk, there’s Drummond Hill.