Hillway expansion joint sealing
Looking for expansion joint sealing in Hillway? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Arrises breaking up along floor joints
- Car park joints leaking onto vehicles below
- Movement joints with split or torn sealant
Expansion joint sealing across Hillway
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Commercial clients in Hillway
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Hillway can form part of a wider programme.
Hospitality, education, healthcare, office and retail clients book us directly too. We plan around the way the building is used, so the building keeps working while we do.
About our expansion joint sealing in Hillway
Brickwork and blockwork walls have vertical movement joints at intervals. Once the seal fails, rain reaches the cavity and the joint can no longer close. The old seal is cut away, backing rod goes in at depth, and a low-modulus masonry sealant is gunned and tooled with primer where the maker calls for it. Most enquiries involve new sealant over old, now failing and expansion joints filled with dirt and stones, on car park decks and ramps, precast concrete panel joints and blockwork control joints. Whoever orders the work in Hillway, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Jobs around smaller places like Hillway are planned so the whole job is done in one visit. Note joint widths and the traffic that uses them, and we’ll take it from there.
Building owners and contractors get the same cover: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Where
- Hillway (PO35)
- Region
- Isle of Wight
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Other services in Hillway
Maintenance after handover
To get the most from the new sealant:
- Check joints after long freezing spells
- Act on the first tear or lifting edge rather than waiting
- Record the sealant used and the date in the O&M file
- Brief car park operatives to protect joint lines during winter clearance
Keep wheels, feet and water off new joints until the sealant has cured. The time varies with product, conditions and joint depth. Barriers left in place until then protect the finish.
An open joint fills with grit, and a joint full of grit can’t close. The edges then take the pressure and start to spall, turning a sealant job into a repair job. A sound seal keeps the joint working.
Expansion joint sealing around Hillway: how the place shapes the job
Hillway sits close to the coast, within about 1 mile. Open joints in coastal car parks and yards let in salt-laden water as well as grit, so it pays to keep them sealed. The South East is one of the drier parts of the UK. External slab and deck joints still need a dry, clean joint to seal, while winter salting gets into any joint left open.
Sites like Arthur Webster Memorial Hospital for Children, 4.7 miles south-west of Hillway, carry ambulances, deliveries and visitors’ cars over their road and deck joints. For a school such as Bembridge Church of England Primary School, playground and building joints can be done in the holidays.
Hillway is about 4 miles south-east of Ryde, in the Isle of Wight. Looking for expansion joint sealing in Hillway? We can help, as we do across the Isle of Wight. 125 places across the Isle of Wight fall within our area, including Hillway. There’s a separate page for Portsmouth, about 9 miles away.
We cover the PO35 postcode districts. We cover commercial and managed buildings on Hillway Road and Jenny Streets Lane. Nearby places we also cover include Bembridge (1 mile north-east), Foreland Fields (1 mile north-east), St Helens (2 miles north-west), Gaskins (2 miles north-west) and Yaverland (2 miles south-west). A short drive away, we cover Newport (9 miles west), Ryde (4 miles north-west), Cowes (11 miles north-west), Sandown (3 miles south-west), Shanklin (5 miles south-west) and Ventnor (7 miles south-west). For island and remote sites, travel and materials need planning ahead, so include the location in your enquiry.
Local landmarks in Hillway
In Hillway, that means premises near The Propeller Inn and Bembridge School, among other places. For rail, the closest station is Brading station, about 1.8 miles west. Well-known places in the area include Sandown Castle (2.6 miles south-west) and Arthur Webster Memorial Hospital for Children (4.7 miles south-west). Not far away are Bembridge Down and Brading Marshes RSPB reserve.
General trades versus a specialist
Redoing a failed joint typically costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Our process
Site rules come first: sign-in, induction and whatever permit system the building uses. With the paperwork done, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. For work around Hillway, we aim to finish in one visit, so photos and measurements up front really help. Then the right materials arrive with us.
- We start with photographs, approximate lengths and any drawings, visiting where needed.
- We compare each joint’s width with the movement and the sealant’s capability.
- Every joint is cleared of the failed seal and any grit packed into it.
- Any broken arrises or friable edges are flagged before work goes further.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Areas reopen once cured, and the work carries our 12-month guarantee.
Preparing the site
- Have the specification and drawings to hand
- Clear stock, furniture or equipment away from the joints
- Send your site hours and access windows
Get a fixed quote
To get a fixed quote, call 01277 525 020 or send photos by email, telling us the site location and the nature of the job. You can also send details through our quote form.
Related advice
Why it’s worth doing now in Hillway
Re-sealing with the same product that failed is often a false economy. A higher movement class, or a design change by the engineer, may be needed and we’ll tell you honestly. One visit to deal with every failing joint makes more sense than several trips to a place like Hillway. Send photos of each area and we will quote for the lot.
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we will explain how it’s made up.
Why appoint us
- Fully insured, including public liability cover
- Joints cleaned back to sound surfaces
- Work carried out by CSCS-carded applicators
- Products installed to the manufacturer’s instructions
See our cost guide or how we’re accredited.
What we can’t put right
Not every problem is a sealant problem, and we are upfront when that’s the case. These need a different solution:
- A joint that has to be widened or re-detailed before it can work
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
- Leaks coming from the membrane rather than the joint seal
If in doubt, give us a call on 01277 525 020 or email us and we will say what we think before you book.
Where we work in Hillway
- Podiums and floor movement joints
- Brickwork movement joints
- Blockwork control joints
- Car park decks and ramps
- Precast concrete panel joints
- Cladding panel joints
Questions about Hillway
Our building in Hillway is near the coast: does that change the sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Can you work on a hospital site such as Arthur Webster Memorial Hospital for Children?
Yes. We work in healthcare settings as well as offices and schools. Each area is agreed with the ward or department and the estates team in advance.
How do I request a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photographs and a postcode.
Can staff carry on working while you’re here?
In the majority of cases, yes. Phased work can be planned so areas stay in use, with each area protected and signed.
What do you charge?
Each job is quoted on its own details. To get one, call the office on 01277 525 020 or send details through our quote form.
Can weather delay the job?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
Do you reseal car park expansion joints?
Yes. Let us know the opening hours and which levels or bays have to stay available.