The Mastic Doctor team standing beside their branded vans outside an office building
Kent · England

Expansion and movement joint sealing in Higham, Kent

Work needed on a movement joint in Higham? We assess it, carry out the work and guarantee our workmanship for 12 months.

  • Leaks through car park deck joints onto the level below
  • New sealant over old, now failing
  • Expansion joints filled with dirt and stones
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
London, the South East & Scotland
CHAS & Constructionline
£5m PL insurance

Expansion joint sealing near Higham

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Aftercare for building managers

Your facilities or cleaning team can help the joints last. Share these points with them:

  • Check joints after long freezing spells
  • Clear dirt from joint lines during routine cleaning
  • Note which joints were done, when, and with what
  • Keep traffic off new joints until the cure time is up

Snow ploughs and scrapers catch on joint lines. Raising blades over joints where possible protects the seal.

Unsupported floor joint edges spall under forklift and pallet-truck wheels. Damaged edges make the floor rough and wear wheels faster, and the damage spreads along the joint. Keeping the filler or sealant sound protects the floor.

How we handle expansion joint sealing in Higham

Joint design counts for as much as the sealant itself. The joint has to be wide enough for the expected movement and the sealant’s movement capability, and depth is controlled using closed-cell backing rod, or bond-breaker tape in shallow joints. For wider joints, many sealant makers recommend a width-to-depth ratio, often around 2:1, and the bead is tooled so it grips the two faces alone. We work on car park decks and ramps, blockwork control joints and brickwork movement joints, and what we’re called in for most is car park joints leaking onto vehicles below and weathered movement joint sealant that no longer flexes. A specialist sealant contractor works differently from a general builder: in Higham, that means joint design, primers and backing rod as standard.

Halls, schools and small commercial buildings near places like Higham have movement joints in brick, block and concrete too. They tend to be overlooked until something leaks or cracks.

Whoever the client is, the cover is the same: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.

The Mastic Doctor team beside their liveried vans in front of an office building
Place
Higham (ME3, DA12)
Region
Kent
Guarantee
12 months on every job
Quote
Quoted before any work starts
Call
01277 525 020
Last updated
3 November 2026

Diagnose, treat, sign off

Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. For a building around Higham, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.

  1. Photos, joint lengths and drawings come to us, or we visit.
  2. We compare each joint’s width with the movement and the sealant’s capability.
  3. Every joint is cleared of the failed seal and any grit packed into it.
  4. Any broken arrises or friable edges are flagged before work goes further.
  5. A sealant suited to the movement and traffic is laid to depth and tooled.
  6. Areas reopen once cured, and the work carries our 12-month guarantee.

Getting the site ready

  • Share the asbestos register for older buildings
  • Agree which areas must stay open
  • Have the specification and drawings to hand

Request a quote

Need a figure for a tender or a budget? We will quote against your scope and drawings that you can work with. For a chat about it beforehand, phone 01277 525 020 or email us.

Get a quick quote

Read more

Commercial clients in Higham

Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.

For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.

Surface by surface

Brickwork and blockwork joints

A brick movement joint full of old mortar or debris can’t close. Everything is raked out before backing and sealant go in and flag any joint that seems undersized.

Internal floor movement joints

Floor joints include saw-cut joints and construction joints. Trafficked floor joints often get a semi-rigid filler, with a flexible sealant where movement is larger.

Why act early in Higham

A like-for-like reseal of a joint that keeps splitting rarely lasts. If the joint is too narrow or the product wrong for the movement, it needs a different approach and we’ll tell you honestly. Older rural buildings around Higham move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.

There’s no price list, since every building and every scope is different. Call for a quote.

Why choose Mastic Doctor in Higham

  • Colour agreed before work starts
  • Fully insured
  • A range of standard colours, depending on the product
  • RAL and finish matching where the product range allows

Take a look at how commercial sealant jobs are priced or how we’re accredited.

Questions about Higham

Will you take on work at estates like Nuralite Industrial Estate, close to Higham?

Yes. We cover Higham and the area around it, including industrial estates, business parks and retail parks such as Nuralite Industrial Estate. Send details of the unit and the work through our quote form for a quick quote.

Would you work within a site like French Hospital?

Yes. We work in healthcare settings as well as offices and schools. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.

Why do our movement joints keep failing?

Most often the movement is too much for the product or the joint width. We review the joint design as well as the sealant before pricing, rather than replacing like for like.

Do your applicators hold CSCS cards?

Yes. We use CSCS-carded applicators, as many construction sites ask for.

Is movement joint sealing guaranteed?

Our workmanship on movement joints carries a 12-month guarantee. The guarantee covers how we sealed, not damage caused afterwards.

What about RAMS and site documents?

Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.

Are you insured?

Yes. We’re fully insured, including public liability cover.

Expansion joint sealing in Higham: the local picture

At about 24 miles from central London, Higham is within reach of the capital. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital, and their floor joints take forklift and pallet-truck traffic all day. At least three named trading, business or retail sites lie within about 3 miles of Higham. Their warehouses, yards and car parks are exactly where joints take the most punishment.

Hospital campuses such as French Hospital (2.8 miles south-east of Higham) grow in stages, leaving movement joints wherever new blocks meet old. On industrial estates such as Nuralite Industrial Estate, 1.6 miles north of Higham, saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic. Across sites such as Gun Lane Business Centre (2 miles south-east of Higham), floor and movement joints can be sealed in phases so units keep working.

Higham is about 2 miles north-west of Rochester, in Kent. We send applicators to Higham for movement joints, handled exactly as we handle every other area. 931 places across Kent fall within our area, Higham among them. Our London page has more on work in that area.

Postcode districts covered here: ME3 and DA12. For a building on Villa Road, Darby Gardens and Ash Crescent or nearby, we can quote for movement joints. We also cover Gadshill (1 mile south), Lower Higham (1 mile north), Shorne (1 mile west), Shorne Ridgeway (1 mile south-west) and Mockbeggar (2 miles east). A short drive away, we cover Maidstone (11 miles south), Sittingbourne (13 miles south-east), Dartford (10 miles west), Sevenoaks (15 miles south-west), Gravesend (4 miles west) and Northfleet (5 miles west).

Local landmarks in Higham

We work on buildings around Rede Common, Strood Academy and Sir John Falstaff Public House. The closest station to Higham is Higham station, roughly 0.9 miles north-east. Nearby you’ll also find Huguenot Museum (2.7 miles south-east) and Pentagon Shopping Centre (3.7 miles south-east). Not far away are Gad's Hill and Rede Common.

Map of Higham © OpenStreetMap contributors

General trades versus a specialist

General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.

Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.

Accreditations

Trusted. Accredited. Insured.