Fire-rated sealing and fire stopping in Higham, Kent
Looking for fire stopping in Higham? It’s simple: send details, get a quote, we seal, guaranteed.
- Openings found when ceilings come down for a refit
- Fire sealant pulled out of the opening
- Fire stopping installed outside its tested range
Fire stopping across Higham
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Higham
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. Each seal follows the manufacturer’s tested detail rather than guesswork. The enquiries we see most involve fire sealant pulled out of the opening and seals that don’t match their tested detail, across linear gaps at wall heads, small duct penetrations where the tested detail allows and joints between fire-resisting walls and floors. A single leaking joint is often how a building in Higham first comes to us: we look at the rest while we are there and tell you what we find.
A job near Higham is typically planned around one visit, so send the specification and photographs first. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application.
- Place
- Higham (ME3, DA12)
- Wider area
- Kent
- Guarantee
- 12 months on every job
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
FAQs: Higham
Could you schedule work at a campus like University for the Creative Arts - Rochester for the vacation?
Yes, holiday working periods are the norm on campus jobs. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Is Higham too far out for you?
Not at all: smaller places are covered as well as towns. London and every South East county are within our area. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
How do you choose the sealant?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Can you send site paperwork?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
What will the job cost?
It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote.
Can you fire stop behind the services contractors?
Yes. Share the penetration schedule and product details and a fixed quote follows. We can follow the services contractor floor by floor.
How long does a job like this take?
The duration is planned around your programme and the access we are given. We’ll give you an estimate of time on site when we quote.
Commercial clients in Higham
We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Higham. Several sites can go on one quote, which keeps the paperwork simple.
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Also in Higham
When it isn’t the sealant
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- Large openings beyond what any sealant detail covers
- Fire risk assessments, a job for a competent assessor
- Designing or specifying fire stopping, which sits with the designer or fire engineer
If you’re not sure, just phone 01277 525 020 or send photos by email and we will give you a straight answer before you book.
Joints and surfaces we work on
- Service gaps in risers
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Pipe penetrations
- Small duct penetrations where the tested detail allows
From enquiry to sign-off
Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. If others near Higham need work, visits can be combined. You’ll have a fixed quote before work starts.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Preparing the site
- For older buildings, check the asbestos register before work
- Send any specification or drawings in advance
- Let building users know which areas are affected
Get a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to phone 01277 525 020 or email us with what you know.
Related advice
After the work
Your facilities or cleaning team can help the joints last. Share these points with them:
- Settle who seals which penetrations at the start of a project
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Get seals inspected before ceilings and boxing close
- Ask which product is in place before decorating
Never top up a fire seal with foam, ordinary silicone or filler. Repairs need the same product and detail as the original.
Regular walk-rounds of service areas are worth the time. A cracked or disturbed seal found early is a small job compared with dozens found at once.
What the job involves on each surface
Plastic pipes
In a fire, plastic pipework melts away and leaves an opening. Small sizes are sometimes covered by an intumescent sealant detail, but many need a collar or wrap. We confirm material and size first and tell you if sealant isn’t the right product.
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. Each gap is measured where it is widest so we know it sits within the tested range, and any outside it are raised with you.
Compartment walls and floors in Higham
In England, Approved Document B covers fire stopping of openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail. Higham lies roughly 24 miles out from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls.
For a building such as Church of St John, new heating or data runs are the usual reason penetrations need sealing. Workshops and IT rooms at colleges like North Kent College Gravesend Campus, 2.9 miles north-west of Higham, are re-serviced often, leaving penetrations to seal. Campus buildings at universities such as University for the Creative Arts - Rochester, 3.5 miles south-east of Higham, see constant changes to data and services, and fire-rated sealant goes in around new penetrations where it is specified.
Higham is about 2 miles north-west of Rochester, in Kent. Higham sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. We work across 931 places in Kent. There’s a separate page for London, about 24 miles away.
We take on service penetrations across the ME3 and DA12 postcode area. Streets here include Villa Road, Darby Gardens and Ash Crescent, and sites on any of them can send details for a fixed quote. Just outside Higham, we also work in Gadshill (1 mile south), Lower Higham (1 mile north), Shorne (1 mile west), Shorne Ridgeway (1 mile south-west) and Mockbeggar (2 miles east). Further afield, our area takes in Maidstone (11 miles south), Sittingbourne (13 miles south-east), Dartford (10 miles west), Sevenoaks (15 miles south-west), Gravesend (4 miles west) and Northfleet (5 miles west).
What’s near Higham
Locally, jobs take us to sites close to Rede Common, Strood Academy and Sir John Falstaff Public House and the streets around them. Higham’s nearest station is Higham station, about 0.9 miles north-east of the centre. A little further out are Huguenot Museum (2.7 miles south-east) and Pentagon Shopping Centre (3.7 miles south-east). Open spaces near Higham include Gad's Hill and Rede Common.
Doing it in-house
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.