Heath Common expansion joint sealing
Expansion joint sealing for Heath Common, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Joints where the bead has lost adhesion
- Movement joints with split or torn sealant
- Arrises breaking up along floor joints
Expansion joint sealing in Heath Common
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
FAQs: Heath Common
Must our site in Heath Common stop work while the joints are done?
Typically not: we work in sections and hand each one back once it has cured. The phasing plan comes with the quote.
Does your area include sites such as Wiston Business Park, near Heath Common?
Yes. Our area takes in Heath Common and its surroundings, with estates and business parks such as Wiston Business Park included. Photos and a short description are enough for a first look.
What site paperwork can you supply?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
Can you fit around our working hours?
Give us your site hours and any access windows in your enquiry, and we will schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
Are expansion joints and movement joints the same thing?
They’re closely related. A movement joint allows for expansion, contraction, shrinkage and loading.
What timescale should we allow for resealing expansion joints?
That depends on joint lengths, widths, access and how much old sealant or filler needs removing. As a guide, it usually takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing.
Is it fine to apply new sealant on top of old?
No. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Expansion joint sealing in Heath Common
Width, depth and product all have to work together. Joint width must suit the movement and the movement class of the sealant, and depth is controlled using closed-cell backing rod, or bond-breaker tape in shallow joints. For wider joints, many sealant makers recommend a width-to-depth ratio, often around 2:1, and the bead is tooled so it grips the two faces alone. We work on car park decks and ramps, cladding panel joints and podiums and floor movement joints, and the failures we’re asked to look at most are rain penetration at brick or block movement joints and new sealant over old, now failing. Whoever orders the work in Heath Common, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Halls, schools and small commercial buildings near places like Heath Common have movement joints in brick, block and concrete too. They tend to be overlooked until something leaks or cracks.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Place
- Heath Common (RH20)
- Wider area
- West Sussex
- Cover
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Should maintenance staff do it?
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Traffic, movement and joints around Heath Common
The South East is one of the drier parts of the UK. External joints still wait for dry conditions, while winter salting gets into any joint left open. The 3 miles around Heath Common take in at least three named trading estates, business parks or retail parks. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
At places like Rock Business Park, 1.2 miles to the south-east of Heath Common, joints are sealed a section at a time so operations carry on. Schools such as Thakeham Primary School have movement joints in their walls and floors that are easy to overlook. On a site such as Wiston Business Park (0.9 miles east of Heath Common), the movement joints are in car park slabs, paving and building elevations.
Heath Common is about 1 mile east of Storrington, in West Sussex. We cover Heath Common, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. We work across 373 places in West Sussex, large and small. Brighton is covered too, around 14 miles from Heath Common.
Postcode districts covered here: RH20 for movement joints. Among the streets we cover are Rock Road, Hampers Lane and Bracken Lane. Close to Heath Common, our area also takes in Abingworth (1 mile north-west), Rock (1 mile south-east), Warminghurst (1 mile north-east), Storrington (1 mile west) and Sullington (1 mile south-west). Nearby towns on our patch include Horsham (11 miles north-east), Worthing (7 miles south), Bognor Regis (15 miles south-west), Haywards Heath (15 miles east), Burgess Hill (13 miles east) and Littlehampton (9 miles south-west).
Landmarks near Heath Common
In Heath Common, that means premises near Rydon Community College, among other places. The nearest railway station is Pulborough station, about 4.7 miles north-west of the centre. Well-known places in the area include The Storrington And District Museum (1.2 miles south-west). The countryside around Heath Common includes Chanctonbury Hill and Amberley Wildbrooks RSPB Reserve.
What happens if it’s left?
Some quotes just add sealant over the old bead. A bead over the old seal can’t bond or flex and soon lets go. We cut out the old seal and prepare the faces every time. Around Heath Common, it’s better to renew all the failing joints at once, rather than one at a time. Photos of every joint help us quote for the whole job.
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Why us?
- Failed material removed, not covered up
- 12-month guarantee on workmanship
- Colour options checked against the specified product
- One contact handling all your sites
Read what affects the cost or our accreditations and insurance.
Diagnose, treat, sign off
Working in a building that stays open takes some planning. The work area is signed and kept contained, keep walkways clear and work section by section so the rest of the building stays in use. Smaller jobs around Heath Common can be grouped with others nearby, which keeps travel down. A fixed quote is given before anything starts.
- We start with photographs, approximate lengths and any drawings, visiting where needed.
- We compare each joint’s width with the movement and the sealant’s capability, and flag anything that needs an engineer.
- Old sealant and debris are cut out of every joint.
- Edges are checked, and we tell you if any need repairing before sealing.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
Preparing the site
- For older buildings, check the asbestos register before work
- Tell us your opening times and when work is allowed
- Clear stock, furniture or equipment away from the joints
Getting a fixed quote
For a fixed quote, give us a call on 01277 525 020 or use the quote form, telling us the site location and the nature of the job. You can also send details through our quote form.
Read more
Keeping the joints sound
To get the most from the new sealant:
- Keep stones and debris out of open joint lines
- Plan racking layouts so feet don’t land on a joint
- Reopen bays and walkways only after the stated cure time
- Look over external and deck joints after a hard winter
Keep wheels, feet and water off new joints until the sealant has cured. The time varies with product, conditions and joint depth and we will tell you when each bay or area can reopen. Barriers left in place until then protect the finish.
A failed deck joint lets water straight through to the level below. That water often carries de-icing salts with it and it can affect the structure over time. Sealing the joint promptly stops it at source.
Places near Heath Common
More services for Heath Common
When it isn’t the sealant
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
- Movement on a scale no sealant is meant to absorb
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
Not sure which it is? You can call 01277 525 020 or use the quote form and we will tell you honestly.
Where we work in Heath Common
- Precast concrete panel joints
- Podiums and floor movement joints
- Cladding panel joints
- Brickwork movement joints
- Blockwork control joints
- Car park decks and ramps
Commercial clients in Heath Common
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. Several sites can go on one quote, so there’s one set of paperwork to deal with.