Fire stopping in Heath Common
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Heath Common. Send details for a fixed quote.
- Service penetrations left open after M&E works
- Old intumescent sealant that has split away
- Unsealed joints where partitions meet the slab
Fire stopping near Heath Common
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Owners, agents and contractors
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.
About our fire stopping in Heath Common
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. We work from your penetration schedule or marked-up drawings. Tell us what records you need and we’ll confirm with the quote. We work on cable penetrations, joints between fire-resisting walls and floors and service gaps in risers, and what we’re called in for most is unsealed joints where partitions meet the slab and fire stopping installed outside its tested range. One point of contact handles commercial sealant work in Heath Common from the first photos to the final walk-round, whether it’s one building or several.
Rural conversions around Heath Common can put new fire-resisting partitions inside older structures. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
We sign every job off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Place
- Heath Common (RH20)
- Wider area
- West Sussex
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Cost factors for service penetrations
Sealant work doesn’t have a standard rate, because every site is different. What we take into account:
- Quantities, in metres or numbers
- Joint width, depth and condition
- How much existing material needs removing
- The site’s rules and procedures
Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote.
Before you send an enquiry
To price the job accurately, we need to understand the site. Send us:
- The asbestos register, for older buildings
- Any dates the work must fit around
- How the joints are reached, and at what height
- Any specification or named product
Need a figure for a tender or a budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, phone 01277 525 020 or email a schedule or drawings.
Keeping the joints sound
Regular inspection catches problems early. Specifically:
- Don’t let anyone top up a fire seal with the wrong product
- Put resealing into every M&E and fit-out package
- Treat an open penetration as a priority repair
- File the specified details where the next contractor can find them
Don’t patch a fire-rated seal with anything outside its tested detail. Repairs need the same product and detail as the original, or a new specification from the designer.
Specify fire stopping early on refits, not as an afterthought. Details can then be picked to suit the actual pipes, cables and ducts.
Diagnose, treat, sign off
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. With the paperwork done, we take the joints in the sequence agreed with you, and each area is checked before we leave it. Smaller jobs around Heath Common can be grouped with others nearby. A fixed quote is given before anything starts.
- First we go through the drawings, schedule or specification for the seals.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Point out any areas we must not close
- Confirm the product named in the specification
- Make sure the joints can be reached
Request a quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
Related advice
FAQs: Heath Common
Is Wiston Business Park, near Heath Common, within your area?
Yes. Our area takes in Heath Common and its surroundings, with estates and business parks such as Wiston Business Park included. Send details of the unit and the work through our quote form for a quick quote.
How does the move away from BS 476 affect penetration seals in Heath Common?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Do you offer coloured sealant?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, so we’ll confirm the curing time on the day.
Can the building stay open while you work?
In the majority of cases, yes. Phased work can be planned so areas stay in use.
Which sealant will you use?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Do you work to architects’ specifications?
Yes. Send it with your enquiry, and we’ll price the work to it.
Places near Heath Common
Also in Heath Common
Signs you need fire stopping in Heath Common
Mixing products or improvising a detail breaks the link with the test evidence. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are the usual culprits.
These are often picked up first by site or facilities staff:
- Expanding foam used as fire stopping
- Fire-stopping items raised at inspection or handover
- Unsealed openings around new pipes and cables
- Fire stopping installed outside its tested range
In a building such as Church of the Holy Sepulchre, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Before you book anyone
- Their approach to joint depth and backing
- What the guarantee covers, and for how long
- Who will actually carry out the work
- What level of public liability insurance do they hold?
Fire-rated sealing for Heath Common buildings
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail. Heath Common has a number of hotels close by, all within 2 miles. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close.
For a hotel such as Mill House Hotel, 1.3 miles east of Heath Common, penetration seals are worth checking after any refit or services upgrade. Schools such as Thakeham Primary School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Heath Common is about 1 mile east of Storrington, in West Sussex. We cover Heath Common, with the same fixed quotes and 12-month guarantee as everywhere else. Across West Sussex, 373 places are covered, Heath Common among them. We also cover Brighton, some 14 miles away.
We take on service penetrations across the RH20 postcode area, for business premises of every kind. We cover commercial and managed buildings on Rock Road, Hampers Lane and Bracken Lane. Close to Heath Common, our area also takes in Abingworth (1 mile north-west), Rock (1 mile south-east), Warminghurst (1 mile north-east), Storrington (1 mile west) and Sullington (1 mile south-west). Bigger towns within reach include Horsham (11 miles north-east), Worthing (7 miles south), Bognor Regis (15 miles south-west), Haywards Heath (15 miles east), Burgess Hill (13 miles east) and Littlehampton (9 miles south-west).
Near you in Heath Common
Locally, jobs take us to sites close to Rydon Community College and the streets around them. The nearest railway station is Pulborough station, about 4.7 miles north-west of the centre. A little further out are The Storrington And District Museum (1.2 miles south-west). Green spaces nearby include Chanctonbury Hill and Amberley Wildbrooks RSPB Reserve.
What we can’t put right
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Openings that need collars, wraps, batts or boards rather than sealant
- Construction that lacks the fire resistance the seal relies on
- Designing or specifying fire stopping, which sits with the designer or fire engineer
If you’re not sure, just phone 01277 525 020 or send details through our quote form and we’ll give you a straight answer.
Where we work in Heath Common
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Linear gaps at wall heads